CISCO USB Dongle Receiver Adapter

Contents

Cisco USB Dongle Receiver Adapter Instruction Manual

Model: USB Dongle Receiver Adapter | Brand: CISCO

Introduction

This manual provides instructions for setting up and using your Cisco USB Dongle Receiver Adapter, specifically designed for seamless wireless connectivity with your CISCO 730 wireless headset. Please read this manual carefully before use to ensure optimal performance and to understand all features.

Important: This adapter is only compatible with the CISCO 730 Wireless Headset.

Setup and Pairing

To pair your USB Dongle Receiver Adapter to your compatible CISCO 730 wireless headset, follow these steps:

  1. Connect the USB Adapter: Insert the USB Dongle Receiver Adapter into an available USB port on your computer or chosen device. Wait for your computer to recognize the device.
    USB-A adapter inserted into a laptop's USB port
    Image: USB-A adapter inserted into a laptop's USB port. Note: USB connection type may vary, but the function remains the same.
  2. Enter Pairing Mode (Adapter): Use a pen or a paper clip to press down the small Pair button on the USB Dongle Receiver Adapter for approximately four seconds. The blue LED on top of the adapter will blink, indicating it has entered pairing mode.
    Close-up of the USB dongle showing the small pairing button and LED indicator
    Image: Close-up of the USB dongle showing the small pairing button and LED indicator.
  3. Enter Pairing Mode (Headset): Put your CISCO 730 wireless headset into pairing mode. Refer to your headset's user guide for specific instructions on how to activate its pairing mode.
  4. Automatic Pairing: The adapter and your headset should pair automatically. Pairing is successful when you receive an audio confirmation from your headset (e.g., "Pairing successful, PC connected") and the USB adapter's LED turns solid blue.

Operating Instructions

Your USB Dongle Receiver Adapter is designed to work seamlessly with your CISCO 730 wireless headset for communication and audio playback. The adapter typically functions out-of-the-box for calls.

Windows Configuration

To configure your USB adapter for music playback or specific call handling on Windows:

  1. For Music Playback: Navigate to Start menu > Control Panel > Sound > Playback tab. Select the "USB Dongle Receiver Adapter" (or similar name, e.g., "Cisco USB Adapter") and set it as the Default Device. Click OK.
  2. For Call Handling: To manage audio behavior during calls (e.g., pausing music), go to Start menu > Control Panel > Sound > Communications tab and select your desired parameter (e.g., "Mute all other sounds" or "Reduce the volume of other sounds").

Mac Configuration

To configure the USB adapter on a Mac:

  1. Go to Apple menu > System Preferences > Sound.
  2. On both the Input and Output tabs, select the "USB Dongle Receiver Adapter" (or similar name, e.g., "Cisco USB Adapter") as your preferred audio device.

Maintenance

The USB Dongle Receiver Adapter is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Keep the device clean and dry.
  • Avoid exposing it to extreme temperatures, high humidity, or direct sunlight.
  • Clean with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Avoid dropping or subjecting the device to physical shock.
  • Do not attempt to disassemble the adapter, as this will void any potential warranty.

Troubleshooting

Problem Solution
Adapter not recognized by computer. Try inserting the adapter into a different USB port. Restart your computer. Ensure your operating system drivers are up to date.
Headset not pairing with adapter. Ensure both the adapter and headset are in pairing mode. Move the devices closer together. Turn off and on both devices, then attempt pairing again. Check your headset's manual for specific pairing instructions.
No audio or poor audio quality. Verify the adapter is selected as the default audio device in your computer's sound settings (see Operating Instructions). Check headset volume levels. Ensure no other Bluetooth devices are interfering.
Adapter LED not lighting up. Ensure the adapter is fully inserted into a working USB port. Try a different USB port or computer.

Specifications

Feature Detail
Brand Name CISCO (Note: 'PHTY' is listed as a brand in product properties, indicating a compatible or generic product for Cisco systems.)
Wireless Type WiFi (This typically refers to Bluetooth connectivity for headsets)
Interface USB
Content AUDIO
Origin Mainland China
Package Length 10 cm
Package Width 10 cm
Package Height 3 cm
Package Weight 0.05 kg
Front view of the Cisco USB Dongle Receiver Adapter
Front View
Back view of the Cisco USB Dongle Receiver Adapter showing regulatory markings
Back View
Angled view of the Cisco USB Dongle Receiver Adapter with regulatory details
Angled View

User Tips

  • Ensure your CISCO 730 headset is fully charged before attempting to pair for the first time to avoid interruptions.
  • If experiencing persistent connection issues, try restarting both your computer and the headset, then re-attempt the pairing process.
  • For optimal signal strength and stability, keep the adapter and headset within close proximity during the initial pairing process and during use.
  • If audio quality is poor, check for potential interference from other wireless devices in the vicinity.

Warranty and Support

For warranty information and technical support related to your CISCO 730 wireless headset, please refer to the official documentation provided with your headset or visit the Cisco support website. This USB Dongle Receiver Adapter is designed to be compatible with your Cisco headset.

For any issues specific to the adapter, please contact the seller directly via the AliExpress message system. Your satisfaction is important, and the seller is available to assist with product-related inquiries.

A general user manual in PDF format is also available for reference: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.