GGBEE SK-YD80G

Contents

GGBEE LED Night Light Instruction Manual

Model: SK-YD80G

Brand: GGBEE

Introduction

Thank you for purchasing the GGBEE LED Night Light. This wireless, battery-powered light is designed to provide convenient illumination with adjustable brightness and three color temperature options. Its compact size and easy installation make it ideal for various indoor applications.

Safety Information

  • Keep this product out of reach of children.
  • Do not use this product in high temperature or humid areas.
  • Ensure batteries are inserted with correct polarity.
  • Do not mix old and new batteries, or different types of batteries.
  • Remove batteries if the product is not used for an extended period.
  • The light source of this lamp is irreplaceable. Once the light source needs to be replaced (such as at the end of its lifespan), the entire lamp should be replaced.

Package Contents

  • 1 x GGBEE LED Night Light
  • 1 x Circular Iron Sheet (with double-sided tape for mounting)

Specifications

Diagram showing dimensions and specifications of the LED Night Light

Figure 1: Product Dimensions and Key Specifications

Feature Detail
Model Number SK-YD80G
Voltage 4.5V
Color Temperature 3000K (Warm White), 4000K (Natural White), 6500K (Cool White)
Body Material ABS
Power 1.5W Max (16*0.094/LED module)
Light Source LED bulbs (16*2835LED)
Battery Type AAA (3 required)
Is Batteries Included No
Product Size 80mm (Diameter) * 32mm (Thickness)
Luminous Flux 60-249 Lumens
Power Generation Touch
Certification CE

Setup

1. Battery Installation

  1. Locate the battery cover at the bottom of the night light.
  2. Twist or slide the battery cover according to the markings to open it.
  3. Insert 3 AAA dry batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
Diagram showing battery compartment and dimensions

Figure 2: Battery Compartment Location

2. Mounting the Night Light

The night light offers two mounting options:

  • Magnetic Attachment: The product has a magnet at the bottom, allowing it to be directly attached to any flat iron surface (e.g., refrigerator, metal cabinet).
  • Adhesive Mounting: For non-metallic surfaces, use the provided circular iron sheet. Peel off the protective film from one side of the double-sided tape on the iron sheet and adhere it to the desired surface. Then, simply attach the night light magnetically to the iron sheet.
LED Night Light mounted on a wall

Figure 3: Night Light Mounted on a Wall

Operating Instructions

The night light is operated via a single touch-sensitive button located in the center of the light.

Finger pressing the center button of the night light

Figure 4: Touch Button Operation

1. Power On/Off and Color Temperature Selection

  • Short Press: Briefly press the center button to cycle through the light modes: White Light → Warm Light → Dual Color Light → Off.
LED Night Light showing different color temperatures

Figure 5: Available Color Temperatures

2. Brightness Adjustment (Infinite Dimming)

  • Long Press: When the light is on, press and hold the center button to continuously adjust the brightness. Release the button when the desired brightness level is reached.
Hand holding the LED Night Light, demonstrating portability

Figure 6: Portable and Versatile Use

Maintenance

  • Cleaning: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or immerse the product in water.
  • Battery Replacement: Refer to the "Battery Installation" section under Setup for instructions on replacing the AAA batteries. Replace all three batteries simultaneously for optimal performance.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on. Batteries are dead or incorrectly installed. Check battery polarity and replace with fresh AAA batteries.
Light is dim or flickers. Low battery power. Replace all three AAA batteries.
Cannot change color or adjust brightness. Button not pressed correctly or battery issue. Ensure a firm short press for color change or a continuous long press for dimming. Check/replace batteries.

User Tips

  • For optimal battery life, use high-quality alkaline AAA batteries.
  • Consider placing the light in areas where you need quick, temporary illumination, such as closets, pantries, or hallways.
  • The magnetic attachment allows for easy repositioning without damaging surfaces.

Warranty and Support

This product is covered by a standard manufacturer's warranty. For detailed warranty terms, conditions, and support information, please refer to the official user manual PDF or contact the seller directly.

For a comprehensive guide and detailed instructions, please refer to the official user manual PDF: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.