1. Introduction
The HLTNC Z7 Series Intelligent Motor Soft Starter is designed to provide a smooth and controlled start for three-phase asynchronous motors. This device helps reduce mechanical stress on the motor and connected equipment, minimizes current surges, and extends the lifespan of the motor system. It is suitable for various industrial applications requiring precise motor control.
Figure 1.1: HLTNC Z7 Series Intelligent Motor Soft Starter
Video 1.1: Product Introduction of the Z7 Series Soft Starter
2. Safety Information
WARNING: Improper installation or operation can lead to serious injury or equipment damage. Always follow safety guidelines.
- Ensure all power is disconnected before installation, wiring, or maintenance.
- Only qualified personnel should install, operate, and maintain this device.
- Verify that the power supply voltage matches the soft starter's specifications.
- Ensure proper grounding of the device.
- Do not operate the soft starter in environments with flammable, explosive, or corrosive gases, or excessive conductive dust.
- Maintain good ventilation around the unit to prevent overheating.
3. Product Overview
3.1. Components and Views
Figure 3.1: Various views of the Z7 Series Soft Starter
3.2. Control Panel
The soft starter features an LCD display and a user-friendly control panel for parameter setting and operation.
Figure 3.2: Control Panel Layout and Key Functions
| Key | Name | Function |
|---|---|---|
| PRG | Programming keys | Enter the parameter menu |
| >> | Shift key | Shift key when modifying parameters |
| ▲ | Incremental key | Increment of data and parameter codes |
| ▼ | Decreasing key | The decreasing of data and parameter codes. |
| RUN | Run key | In keyboard operation mode, used for running operations |
| STOP / RESET | Stop/Reset button | When in operation, press this key to stop the operation. When in a fault state, it can be used for reset operation. |
| ENTER | Confirm key | 1. Enter the next level submenu. 2. Set parameter determination. |
| LOCAL/REMOTE | Panel control keys | Enable or disable keyboard control. |
3.3. Model Naming Convention
Understanding the model code helps in identifying the specific features of your soft starter.
Figure 3.3: Inverter Model Design Meaning
- CHRH: Corporate code
- R: Soft boot
- 055: Motor power (e.g., 055 for 55KW)
- Z: Device type (S for comprehensive type)
- 22: Display type (1 or none for Digital display, 22 for Chinese, 3 for special, 6 for online, 7 for intelligent on-line)
4. Setup and Installation
4.1. Environmental Conditions
For optimal performance and longevity, ensure the soft starter is installed in an appropriate environment:
- Altitude: Below 2000 meters. For altitudes over 2000 meters, downgrading is required.
- Ambient Temperature: -10°C to +40°C.
- Relative Humidity: Below 95% RH, non-condensing.
- Atmosphere: No flammable, explosive, or corrosive gases. No conductive dust.
- Ventilation: Good indoor ventilation is essential.
- Vibration: Less than 0.5G.
4.2. Physical Dimensions and Mounting
Refer to the table below for external and installable dimensions (in mm) and mounting hole specifications.
| Specification | W (mm) | H (mm) | H2 (mm) | D (mm) | W1 (mm) | H1 (mm) | Mounting Hole (mm) |
|---|---|---|---|---|---|---|---|
| 5.5KW-55KW | 125 | 252 | 206 | 197.5 | 102 | 228 | 4 |
| 75KW-110KW | 190 | 364 | 330 | 234.5 | 140 | 316 | 6 |
| 132KW-200KW | 225 | 370 | 340 | 226 | 160 | 326 | 6 |
4.3. Wiring Diagram
The following diagram illustrates the terminal wiring for the soft starter. Ensure all connections are secure and correctly matched to your motor and power supply.
Figure 4.1: Soft Starter Terminal Wiring Diagram
Note: The diagram includes connections for three-phase power input (R, S, T), motor output (U, V, W), relay outputs, control terminals (Activate, Stop, Resetting, External fault, Switching output, Common end, +24V, CCM, RS485, Analog common end, AO analog output, thermistor PTC1, PTC2), and chassis grounding.
5. Operation
5.1. Basic Operation
- Start: Press the RUN button on the control panel to initiate the soft start sequence.
- Stop: Press the STOP/RESET button to stop the motor.
- Reset: If the soft starter enters a fault state, press the STOP/RESET button to clear the fault.
5.2. Parameter Setting
To access and modify parameters:
- Press the PRG key to enter the parameter menu.
- Use the ▲ and ▼ keys to navigate through the parameter codes and data.
- Use the >> (shift) key to move the cursor when modifying a parameter value.
- Press ENTER to confirm a selection or set a parameter value.
- The LOCAL/REMOTE key enables or disables control from the keyboard.
6. Maintenance
Regular maintenance ensures the longevity and reliable operation of your soft starter.
- Cleaning: Periodically clean the soft starter's exterior and ventilation openings to prevent dust accumulation, which can impede cooling. Use a soft, dry cloth.
- Inspection: Regularly check all wiring connections for tightness and signs of wear or damage. Ensure the cooling fan is operating correctly and free from obstructions.
- Environmental Check: Verify that the operating environment continues to meet the specified conditions (temperature, humidity, absence of corrosive elements).
7. Troubleshooting
If the soft starter is not functioning as expected, consider the following common issues:
- No Power: Check the main power supply connections and ensure the circuit breaker is on.
- Motor Not Starting: Verify all wiring connections according to the diagram. Check motor parameters and ensure they match the soft starter's settings.
- Fault Indication: If a fault code is displayed, refer to the full user manual (PDF) for specific fault code interpretations and solutions.
- Overheating: Ensure adequate ventilation. Clean any dust from the cooling fan and heat sinks. Check ambient temperature.
- Incorrect Operation: Review the parameter settings and ensure they are configured correctly for your application.
8. Specifications
8.1. General Parameters
| Parameter | 220V Models | 380V Models |
|---|---|---|
| Voltage | 220V | 380V |
| Rated Current | 20A - 2390A | 13A - 1350A |
| Rated Power | 5.5KW - 630KW | 5.5KW - 750KW |
| Display Mode | Chinese LCD display | |
| Parameter Number | 115 | |
| Protection Type | 18 | |
| Number of Input/Output Terminals | 20 | |
| Overload Capacity | Adjustable | |
| Cooling Method | Forced air cooling | |
| Protection Level | IP20 | |
8.2. Detailed Product Parameters (Example CHRHR030Z7)
Figure 8.1: Detailed Product Parameters for Model CHRHR030Z7
| Parameter | Value |
|---|---|
| Model | CHRHR030Z7 |
| Voltage | AC380V |
| Current | 60A |
| Insulation Voltage | 660V |
| Short Current | 10KA |
| Frequency | 50HZ |
| Category | AC53B |
| Loading | 30KW |
| Withstand Voltage | 6KV |
| Weight | 2596g |
9. User Tips
- Motor Compatibility: Always ensure the rated power of your motor precisely matches the rated power of the soft starter for optimal performance and to prevent damage.
- External Device Compatibility: If connecting external sensors or control devices, such as encoders, ensure their specifications and wiring are compatible with the soft starter's input/output terminals. Refer to the full PDF manual for detailed compatibility information.
- Parameter Backup: After configuring your desired parameters, it is advisable to record them for future reference or in case a reset is needed.
10. Additional Resources
For a complete and detailed guide, including advanced parameter settings, fault codes, and more comprehensive wiring diagrams, please refer to the official user manual in PDF format: