SONGGER GZ-5T

Contents

SONGGER Roller Mixer GZ-5T Series User Manual

Laboratory Multi-Tube Rotator for Blood Sample Mixing

1. Introduction

The SONGGER QW-GZ Series Tube Roller Mixer is designed for gentle and continuous mixing of blood samples, viscous liquids, and laboratory suspensions. The horizontal rolling motion ensures uniform mixing while preventing sedimentation and coagulation without damaging blood cells.

The unit is driven by a DC motor and features adjustable speed control. Timer models (indicated by "T" in the model name) are equipped with a digital display and allow time setting. This device is suitable for medical laboratories, clinical diagnostics, research institutions, and industrial sample processing.

SONGGER Roller Mixer showing multi-tube mixing and adjustable speed
Figure 1: SONGGER Roller Mixer highlighting multi-tube mixing and adjustable speed capabilities.

2. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your supplier immediately.

  • 1 × Tube Roller Mixer (Model QW-GZ-5, QW-GZ-5T, QW-GZ-7, or QW-GZ-7T)
  • 1 × Power cord
  • 1 × User manual (this document)

3. Specifications

SONGGER Roller Mixer with key specifications listed
Figure 2: Overview of the Roller Mixer and its main specifications.
Table 1: General Specifications
Feature Specification
Power Supply AC 100-240 V, 50-60 Hz
Rated Voltage AC 100-240 V
Power Consumption 15 W
Fuse Specification 250 V / 3 A / Φ5×20 mm
Motor Type DC motor
Speed Range 20-110 rpm (adjustable)
Amplitude 22 mm ±1 mm
Roller Length 280 mm
Maximum Load 4 kg
Dimensions 510 × 250 × 100 mm
Material ABS housing
Battery Included No
High-concerned chemical None
Origin Mainland China

Model Configurations:

Table 2: Model Specifics
Model Rollers Timer Digital Display Net Weight
QW-GZ-5 5 No No 3.7 kg
QW-GZ-7 7 No No 3.8 kg
QW-GZ-5T 5 1-999 min Yes 3.7 kg
QW-GZ-7T 7 1-999 min Yes 3.8 kg

4. Setup

Step 1: Preparation

  1. Place the mixer on a stable and level laboratory bench.
  2. Ensure the power switch is in the OFF position.
  3. Connect the unit to a suitable AC outlet within the specified voltage range (AC 100-240 V).
  4. Load sample tubes evenly across the rollers. Ensure the total weight of the samples does not exceed 4 kg.

5. Operation

Step 2: Starting Operation

  1. Switch on the power supply.
  2. Adjust the speed control to the desired value between 20 and 110 rpm.
  3. SONGGER Roller Mixer with analog speed control knob
    Figure 3: Roller Mixer with analog speed control (non-timer models).
  4. For timer models (QW-GZ-5T, QW-GZ-7T), set the required operating time between 1 and 999 minutes using the control panel.
  5. SONGGER Digital Roller Mixer with speed and time digital displays
    Figure 4: Digital Roller Mixer with speed and time displays (timer models).
  6. Start the timer. The device will stop automatically when the preset time is reached.

Step 3: Completion

  • After operation, switch off the device.
  • Disconnect the power supply if the unit will not be used for an extended period.

6. Safety Precautions

  • Ensure the input voltage matches AC 100-240 V before connection.
  • Do not exceed the maximum load capacity of 4 kg.
  • Distribute tubes evenly to prevent imbalance and vibration during operation.
  • Do not use the device in explosive, flammable, or highly corrosive environments.
  • Recommended operating conditions are 5 to 40 degrees Celsius and relative humidity not exceeding 80 percent, non-condensing.
  • Do not immerse the device in water or other liquids.
  • Disconnect the device from the power supply before cleaning or maintenance.
  • Risk of electric shock. Do not open the housing. Internal servicing must be carried out by qualified personnel only.
  • Do not operate the device with a damaged power cord or plug.
  • Ensure the device is used only for laboratory mixing applications.
  • Keep out of reach of children.
  • Proper disposal must comply with Directive 2012/19/EU on Waste Electrical and Electronic Equipment.

7. Storage and Maintenance

  • Clean the housing and rollers with a soft cloth lightly moistened with mild detergent. Do not use abrasive or corrosive cleaning agents.
  • Ensure the device is completely dry before storage or reuse.
  • Store the unit in a dry and well-ventilated environment away from direct sunlight.
  • If fuse replacement is required, use only the specified type 250 V / 3 A / Φ5×20 mm.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

Table 3: Common Troubleshooting Steps
Problem Possible Cause Solution
Device does not power on No power supply, damaged power cord, or blown fuse. Check power connection, inspect power cord for damage, replace fuse if necessary (use specified type).
Uneven mixing or excessive vibration Tubes not evenly distributed or exceeding maximum load. Ensure tubes are evenly loaded and total weight is within 4 kg limit.
Timer model does not stop automatically Timer not set correctly or malfunction. Verify timer settings. If issue persists, contact support.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support.

9. User Tips

No specific user tips were available from reviews or Q&A for this product. Always refer to the safety precautions and operating instructions for optimal performance and longevity of your device.

10. Warranty and Support

For technical support, service, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt and product model information handy.

An electronic version of this user manual is available for download: User Manual (PDF).

This document is provided for product instruction purposes only and does not constitute legal advice. The seller is responsible for ensuring compliance with applicable EU directives, including CE marking, EMC requirements, and the Low Voltage Directive where applicable.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.