1. Introduction
This manual provides comprehensive instructions for the installation, setup, and operation of your EzoneTronics Wireless CarPlay Android Auto Interface. This device integrates advanced smartphone connectivity features into your Audi's existing RMC MMI3G system, enhancing your driving experience with navigation, media, and communication functionalities.

2. Functional Statement
The EzoneTronics interface offers the following key functionalities:
- CarPlay / Android Auto: Seamless integration with your iPhone or Android device, providing voice command and control for phone calls, information, navigation, and music. Supports both wireless and wired connections.
- Reversing Video Input: The smart module decodes video signals, allowing for the integration of factory original reverse cameras, parking radar, and aftermarket reverse or 360-degree cameras.
- Mirroring: Supports wired and wireless mirroring functions for both iPhone (AirPlay) and Android phones (AutoLink), displaying your phone's screen on the car's display.
- USB Video Playback: Automatic media playback function, allowing direct playback of video and audio media from a USB disk.

3. Kit Contents
Please verify that all items are present in your package:
- CarPlay Decoder Box
- Power Cable Harness
- LVDS Cable
- WiFi Antenna
- USB-AV Cable
- Gateway Cable


4. Setup
4.1 Toggle Switch (DIP) Setup
The toggle switches on the CarPlay decoder box must be set according to your car's screen size.
- Locate the DIP switches: The toggle switches are located on the side of the CarPlay decoder box.
- Determine your screen size: Check your Audi's MMI screen size.
- Set the switches: Refer to the diagrams below for the correct switch configuration.



4.2 Cable Connection Chart
Follow the wiring diagrams carefully for proper installation. Installation typically involves removing the climate control panel, radio, and glove compartment to access the necessary connections.



4.3 Decoder Box Installation Location
The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. The module can often be stored in the glove compartment.


5. Operating Instructions
5.1 Switching Between Interfaces
After all cables are connected, you can switch between the original MMI3G interface and the CarPlay/Android Auto interface by long-pressing the "RETURN" button on your car's control panel.

5.2 Wireless CarPlay Connection Method (iPhone)
- On the interface, select "Bluetooth" in the SmartPhone Setting menu.
- On your iPhone, check the Bluetooth device name starting with "CAR-xxxx".
- Turn on Wi-Fi on your iPhone and keep it on. Then, go back to Bluetooth settings to connect to the CarPlay device.
- Select the Bluetooth device name (e.g., "CAR-BT-533d") and confirm the pairing request. A window will pop up; select "Use CarPlay".


5.3 Apple Wireless Screen Mirroring (AirPlay)
- On the interface, select "AirPlay" in the SmartPhone Setting menu.
- On your iPhone, select "iOSMirror" from the setup options. For wireless connection, ensure your iPhone is connected to the device's Wi-Fi (CAR-WIFI-XXX, password 66668888).
- After successful Wi-Fi connection, return to your iPhone's main interface, open the shortcut menu, select "Screen Mirroring", and turn it on.
- Once "Screen Mirroring" is active on your iPhone, select "AirPlay" to complete the wireless screen mirroring.

5.4 Wireless Android Auto Connection Method (Android)
- On the interface, select "Bluetooth" in the SmartPhone Setting menu.
- On your Android phone, check the Bluetooth name starting with "CAR-xxx" in the Bluetooth interface.
- Click on the Bluetooth name beginning with "CAR-xxx". A pairing request will appear; click "Pairing".
- After successful Bluetooth pairing, follow the Android Auto connection process on screen. Turn on the Android Auto app on your mobile phone, and the system will connect automatically.

5.5 Android Wireless Screen Mirroring (AutoLink)
- Scan the QR code on the interface using your Android phone's browser to download and install the AutoLink app.
- Switch the Wi-Fi AutoLink option to "ON" in the interface's Settings page.
- Open the downloaded AutoLink software on your phone, search for "CAR-WIFI-XXXX", connect, and then click "START NOW" on the phone prompt box.
- The media sound for AutoLink will need to connect via Bluetooth.

5.6 Audio Settings
To adjust audio settings or resolve echo issues during phone calls:
- Navigate to Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button. This will generate a beep.
- If there is an echo during a phone call, click this button for echo correction. When correcting the echo:
- Keep quiet in the car.
- Turn the volume to a moderate position.
- Click "Start Auto AEC".
- Wait 20 seconds for estimation to complete.

6. Maintenance
- Keep the device and cables clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Ensure all cable connections remain secure to prevent signal loss or intermittent functionality.
7. Troubleshooting
Common Issues and Solutions:
- No connection/Interface not appearing: Ensure all cables are securely connected and the toggle switches are set correctly for your screen size. Try long-pressing the "RETURN" button to switch interfaces.
- Echo during phone calls: Refer to the "Audio Settings" section (5.6) for instructions on using the Call Echo Cancellation feature.
- Route announcements during phone calls: This is a known behavior. Adjust volume settings or mute phone calls if this is disruptive.
- Cannot switch between CarPlay and regular car menu: This interface is designed to switch between the original MMI3G and the CarPlay/Android Auto interface. If you are unable to switch, verify the "RETURN" button functionality and cable connections.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | EzoneTronics |
| Model | RMC System Interface |
| Compatibility | Audi A6, A7 (2012-2016) with RMC MMI3G System, 6.5-inch screen |
| Connectivity | Wireless CarPlay, Wireless Android Auto, Wired/Wireless Mirroring (AirPlay, AutoLink) |
| Additional Features | Reversing Video Input (supports OEM and aftermarket cameras), USB Video Playback |
| Origin | Mainland China |
| Package Weight | 1.064 kg |
| Package Dimensions | 26cm (L) x 19cm (W) x 11cm (H) |
9. User Tips
- Installation Time: The assembly process may take approximately 30-40 minutes, especially when dealing with cables in confined spaces.
- Cable Management: Be mindful of the large plugs and limited space in the vehicle during installation. Careful routing of cables is recommended.
- Module Storage: The main module can be conveniently stored in the glove compartment after installation.
- iPhone Pairing: For iPhone users, pairing is primarily done via Bluetooth, not Wi-Fi, despite some initial instructions.
10. Frequently Asked Questions (FAQ)
- Q: Are cables included with the product?
- A: Yes, all necessary cables are included.
- Q: Does this fit an Audi A6 C7 2012 with the MMI RMC system?
- A: Yes, it fits the Audi A6 C7 with MMI RMC, including models with navigation. Installation involves removing the climate control panel, radio, and glove compartment.
11. Warranty and Support
For additional item guides and documents, please refer to the User Manual (PDF).
If you encounter any issues or require technical assistance, please contact the seller. To expedite support, please provide the following information:
- Your order ID.
- Your car model.
- The year of your car.
- Your car's screen size.
- The current toggle switch setup.
- Pictures of the LVDS cable connection.
- The software version (found in the CarPlay decoder menu: Settings > System Version).