1. Product Information
This manual provides instructions for the RACBOX H4 Bi Mini LED Projector Lens Car Bulbs, designed for automotive lighting applications.
- Product Name: Projector Lens & Accessories
- Model: H4 Mini Bi-led Projector Lenses
- Batch/Serial Number: 004
Manufacturer & EU Representative Information
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com
Compliance Information
This product is an auxiliary accessory for Motorcycle lighting and is only used for the normal replacement and upgrade of the original lights, not for illegal modification or illegal use. The products meet the relevant national automotive lighting industry standards, and have undergone strict quality testing before leaving the factory, and are qualified to leave the factory.
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Setup and Installation
The RACBOX H4 Bi Mini LED Projector Lens Car Bulbs are designed for plug-and-play installation. Follow these steps carefully:
- Remove the headlight assembly from the vehicle bumper.
- Open the headlight cover by heating or unscrewing the seal.
- Mount the lens into the headlight bracket and fix it with screws.
- Connect the lens wires to the power supply and adjust the light beam.
- Reseal the headlight cover and reinstall the assembly back to the car.
Note:
- If the light does not turn on after installation, please reverse the plug polarity.
- For vehicles with complex CAN-bus systems, an anti-flicker harness or decoder may be required.
Figure 3.1: H4 Bi Mini LED Projector Lens Car Bulbs with wiring and beam patterns.
Figure 3.2: Example of Left Hand Drive H4 Bi Mini LED Projector Lens Car Bulbs.
Figure 3.3: External Intelligent Driver with EMC and Temperature Monitor, indicating CAN-bus readiness.
4. Operating Instructions
The RACBOX H4 Bi Mini LED Projector Lens Car Bulbs feature an advanced design for optimal lighting performance:
- High-Low Beam Dual Reflector Cup Design: Provides significantly brighter high beam output compared to older designs.
- Built-in Mini Projector Lens: Ensures crystal clear and more concentrated light output.
- Hi-Lo Beam Functionality: The low beam offers a clear cut-off line to prevent dazzling oncoming vehicles, while the rectangle high beam projects light to a great distance for enhanced visibility.
- Decoding Function: Features constant current and temperature protection for stable operation.
Figure 4.1: Integrated design of high & low beam + spot light components.
Figure 4.2: Comparison of low beam (perfect cutting pattern) and high beam + spot light (more concentrated) effects.
Figure 4.3: Visual representation of +500% brightness boost for low and high beams on a road at night.
5. Maintenance
To ensure the longevity and optimal performance of your RACBOX LED projector lenses, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the exterior of the projector lenses with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
- Inspect Connections: Annually check all wiring connections to ensure they are secure and free from corrosion.
- Heat Dissipation: Ensure that the area around the headlight assembly allows for adequate airflow to facilitate heat dissipation from the built-in fan and copper heat pipes.
Figure 5.1: Diagram illustrating the 2-in-1 cooling system with dual copper heat pipe and 12,000 RPM silent turbofan.
Figure 5.2: IP67 waterproof rating ensures protection against rain, snow, and fog.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Incorrect plug polarity | Reverse the plug polarity. |
| Light flickers or causes error messages | CAN-bus system incompatibility | Install an anti-flicker harness or CAN-bus decoder (sold separately if needed). |
| Reduced light output or uneven beam pattern | Improper installation of LED in the dome | Re-check the fitting of the LED in the dome. Ensure it is properly seated to avoid burning the reflective surface. |
7. Specifications
Figure 7.1: Detailed product dimensions and specifications.
| Feature | Detail |
|---|---|
| Light Type | H4 |
| Operating Voltage | DC 9-16V |
| Color Temperature | 6000K White |
| Power | 90W/pair |
| Luminous Flux | 50000LM |
| Installation Method | Plug-and-play LED Headlight |
| Beam Type | Hi-Lo Beam |
| Waterproof Rate | IP67 |
| Operating Temperature | -40°C ~ +80°C |
| Material | Aviation Aluminum, PC Lens |
| Fitment | Universal car (Fit for H4 model car), also fits motorcycles |
| Lifespan | 50,000 Hours |
| Light Source | Powerful Big Chip LED (4575 CSP CHP New Technique) |
Figure 7.2: Illustration of the 4575 CSP CHP new technique, offering 300% brighter luminous efficiency.
Figure 7.3: The 3rd generation unique double copper tube design for even heat dissipation and longer product life.
8. Warranty and Support
Figure 8.1: Overview of RACBOX Warranty terms.
Standard Warranty
RACBOX warrants to the first end-user ("End-User") that the Product shall materially conform to Racbox's published specifications in the user manual, subject to the terms and conditions below.
Warranty Period
The Warranty Period for a new Product is ONE Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.
What is Covered
The Standard Warranty provides support from Racbox ("Support") as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for "replacements parts", "partial refund" in the Warranty Period on any product due to manufacturing defects of components or workmanship.
What is NOT Covered
The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error or failure to follow instructions relating to Product's use.
How to Get Warranty Service
If you have any other questions feel free to contact our customer support, either by phone, email, or through our Live Support system.
For further details, you may refer to the official user manual PDF: RACBOX H4 Bi Mini LED Projector Lens User Manual (PDF)
9. User Tips
- Careful Installation: Be particularly careful when installing the LED into the headlight dome. Ensure it is properly fitted to prevent potential damage to the reflective surface and to ensure optimal light output.
- Brightness: Users have reported very strong and well-illuminating light output from these projector lenses.