Tuya WG-088

Contents

Tuya WiFi Switch Smart Garage Door Opener Controller User Manual

Model: WG-088

1. Introduction

The Tuya WiFi Switch Smart Garage Door Opener Controller is a smart home module designed to integrate your garage door opener with your smart home ecosystem. It allows for remote control, voice control, scheduling, and real-time monitoring of your garage door status via the Smart Life or Tuya Smart app, and is compatible with voice assistants like Amazon Alexa and Google Home.

This manual provides detailed instructions for installation, setup, operation, and troubleshooting to ensure a seamless experience with your new smart device.

2. Safety Information

  • Ensure the power is disconnected from your garage door opener before beginning installation.
  • This device operates on low voltage (Below 50Vac or 75Vdc) but connects to your garage door opener which may have higher voltages. Exercise caution.
  • Do not expose the device to moisture or extreme temperatures.
  • Keep children away from the garage door area during installation and testing.
  • Always ensure the garage door is clear of obstructions before operating it remotely or via voice commands.

3. Package Contents

Please check the box for the following items:

  • 1x Smart Garage Controller
  • 1x Door Sensor (with cable)
  • 3x Stickers
  • 2x Brackets
  • 4x Ties
  • 4x Screws
  • Wall Nails (quantity not specified, typically for mounting)
  • User Manual
Product list showing smart garage controller, door sensor, line holds, stickers, ties, brackets, wall nails, and screws.
Figure 3.1: Included components in the package.

4. Specifications

AttributeValue
Model NumberWG-088
Voltage110-240V
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
CertificationCE
Smart Home Platform CompatibilityAlexa, Tuya, Google Assistant
Wireless ConnectivityWi-Fi IEEE 802.11 b/g/n (2.4GHz only)
Power3000W
Electricity16A
Controller Dimensions (L x W x T)90mm x 40mm x 25mm
Sensor Cable Length5m
Product Weight0.277 kg
Product parameter table and diagram showing dimensions and components.
Figure 4.1: Product parameters and component overview.

5. Setup and Installation

Before starting, ensure your smart phone or tablet is connected to a 2.4G WiFi network. The device only supports 2.4G Wi-Fi. If you use a 5G router (which provides both 5G and 2.4G Wi-Fi signals), please select the 2.4G Wi-Fi to connect your smart phone.

5.1. Test Device for Opener Compatibility

  1. Power up the garage controller. The red light and blue light will flash alternatively.
  2. Use the included Red & Black wires to connect the device to your opener. Put each end to the same terminals as the wall button wires are terminated to.
  3. Use a tiny screw or nail to click the button in the device; your garage door should activate.

If this test fails, your device may not be compatible. For additional installation instructions and a list of compatible models, please check your opener's user manual or contact online support.

Wiring diagram for testing garage door opener compatibility, showing red and black wires connecting the smart controller to the garage door opener's wall console terminals.
Figure 5.1: Wiring for compatibility test. The motor and wall console are not included.

5.2. Sensor Installation Method

Insert the 2.0mm terminal of the sensor to the garage controller. Then, carefully install the sensor and the magnet with a gap of 3-15mm on your garage door using the provided screws, brackets, 3M adhesive, or wall nails/line holders/ties.

Diagram showing how to install the door sensor and magnet on a garage door and wall, with a 3-15mm gap between them.
Figure 5.2: Sensor installation method.
Easy installation diagram showing the sensor cable connected to the controller, and the sensor and magnet mounted on the garage door and wall.
Figure 5.3: Overall easy installation diagram.

5.3. App Pairing (Add Device)

The garage door will be activated when successfully added (the blue LED will stop blinking), so keep your door CLOSED first during the pairing process.

  1. Power up the garage controller. Press and hold the ON/OFF button to make the blue light flash.
  2. Ensure your cell phone is connected to your WiFi network and Bluetooth is enabled.
  3. Launch the Smart Life or Tuya Smart app. Tap the "+" icon in the upper right corner.
  4. The app should auto-discover the device. If not, select "Electrical" then "Garage door opener wifi".
  5. Choose your 2.4G Wi-Fi network and input the password. Tap confirm.
  6. Tap "Confirm indicator rapidly blink" (this step is ignored if the device was auto-discovered).
  7. The device will auto-connect. Once complete, you will be prompted to rename the device. Enter a new name and Save.
Video 5.1: Demonstration of device pairing with the Smart Life/Tuya Smart app and testing the door sensor functionality.

6. Operating Instructions

6.1. Remote Control via App

Once paired, you can open or close your garage door directly from the Smart Life or Tuya Smart app on your smartphone. The app will display the real-time status of your garage door (open or closed).

Smartphone displaying the Smart Life app interface for controlling a garage door, showing 'Closed' status.
Figure 6.1: Remote control of the garage door via the app.

6.2. Voice Control

The device is compatible with Amazon Alexa and Google Home. Follow the steps below to link your account:

6.2.1. Work with Alexa

  1. Open the Alexa App, tap on the menu in the upper left corner. Go to "Skills".
  2. Enter "Tuya Smart" or "Smart Life" in the search field and search.
  3. Tap "Tuya Smart" or "Smart Life" to enable the skill.
  4. Enter your account information and tap 'Log in' to link your account to your Amazon account. If your account is a phone number, select your country. If it's an email address, select a random country/region code.

Voice commands:

  • "Alexa, turn on [device name]"
  • "Alexa, turn off [device name]"
  • "Alexa, is the [device name] locked?"

6.2.2. Work with Google Home

  1. Launch the Google Home app, tap the menu.
  2. Tap "Home control".
  3. Under Devices, tap the "+" icon.
  4. Tap "Tuya Smart" or "Smart Life".
  5. Enter your account information and tap 'Log in' to link your account to your Google account. If your account is a phone number, select your country. If it's an email address, select a random country/region code.

Voice commands:

  • "Hey Google, turn on [device name]"
  • "OK Google, turn off [device name]"
Image showing compatibility with Tuya, Google Assistant, and Amazon Alexa, with the smart controller and various smart speakers.
Figure 6.2: Device compatibility with smart home platforms.
Image demonstrating voice control with Alexa and Google Home, showing a car entering a garage and smart speakers.
Figure 6.3: Voice control functionality.

6.3. Timing Schedules

You can set specific times within the app for your garage door to automatically open or close. This is useful for daily routines or security.

Smartphone app showing a 'Timing Schedules' interface with options to set turn on/off times for the garage door.
Figure 6.4: Setting timing schedules in the app.

6.4. Countdown Function

Set a countdown timer for your garage door to close or open automatically after a specified duration.

6.5. Device Sharing

Authorize multiple family members or trusted individuals to access and control your smart garage door opener through their own Smart Life or Tuya Smart app accounts.

Image showing multiple people sharing control of the smart garage door opener via their smartphones.
Figure 6.5: Device sharing feature.

6.6. Historical Record

The app keeps a historical record of all garage door operations, allowing you to check when the door was opened or closed.

Smartphone app displaying a 'Historical record' of garage door open/close events with timestamps.
Figure 6.6: Historical record of garage door activity.

6.7. Real-time Notifications

Receive instant alerts on your smartphone if your garage door is opened or closed, or if it is forcibly opened by others, enhancing security.

Image showing a person receiving a real-time notification on their phone that the garage door opened.
Figure 6.7: Real-time notifications for security.

7. Maintenance

  • Keep the device and sensor clean and free from dust and debris.
  • Periodically check the sensor and magnet alignment to ensure the 3-15mm gap is maintained for accurate status detection.
  • Ensure all wiring connections remain secure.
  • Regularly update the Smart Life/Tuya Smart app to the latest version for optimal performance and security.

8. Troubleshooting

8.1. Device Not Pairing / Blue Light Not Flashing

  • Ensure the device is powered on.
  • Press and hold the ON/OFF button on the controller until the blue light flashes rapidly.
  • Verify your smartphone is connected to a 2.4GHz Wi-Fi network. This device does not support 5GHz Wi-Fi.
  • Make sure your Wi-Fi router's MAC filtering is disabled or that the device's MAC address is whitelisted.
  • Ensure your phone and the garage controller are within range of your Wi-Fi router during pairing.

8.2. Garage Door Not Activating During Compatibility Test

  • Double-check the wiring connections between the controller and your garage door opener's wall button terminals. Ensure they are correctly terminated.
  • Confirm that the garage door opener itself is functioning correctly with its original wall button.
  • If the test fails, your garage door opener might not be compatible. Refer to your opener's manual or contact the seller for assistance.

8.3. Incorrect Garage Door Status in App

  • Check the installation of the door sensor and magnet. Ensure they are securely mounted and the gap between them is within the specified 3-15mm range when the door is closed.
  • Verify the sensor cable is properly connected to the smart controller.

9. User Tips

  • Some users have noted that the sensor is a crucial component for accurate door status. Ensure it is installed correctly and the magnet is within the specified range for reliable operation.
  • For optimal performance, consider placing your Wi-Fi router closer to the garage or using a Wi-Fi extender if signal strength is weak in the garage area.
  • Regularly review the historical record in the app to monitor garage door activity, especially if you share access with others.

10. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF available at User manual (PDF). You can also contact the seller directly for product-specific inquiries or technical assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.