Introduction
The Sonicake Matribox QME-50 is a versatile multi-effects processor designed for both guitar and bass players. It integrates a wide array of effects, amp simulations, and practical tools like a looper, tuner, and drum machine, all within a compact and user-friendly unit. Featuring advanced White-Box digital modeling technology, the Matribox QME-50 delivers high-quality tone and a flexible effect matrix to enhance your musical expression.

Setup Guide
Follow these steps to set up your Matribox QME-50 for optimal performance.
Power Connection
- Connect the included DC 9V AC adapter (3A) to the "DC 9V" input jack on the rear panel of the Matribox QME-50.
- Plug the AC adapter into a suitable power outlet.
Audio Connections

- Instrument Input: Connect your guitar or bass to the "INPUT" jack using a standard 1/4-inch instrument cable.
- Output to Amplifier/Mixer:
- For mono output, connect the "L (MONO) OUTPUT" jack to your amplifier or mixer input.
- For stereo output, connect both "R OUTPUT" and "L (MONO) OUTPUT" jacks to your stereo amplifier setup or mixer.
- Headphones: Connect your headphones to the "PHONES" jack for silent practice.
- Auxiliary Input: Use the "AUX IN" jack to connect an external audio source (e.g., smartphone, MP3 player) for jamming along.
- USB Connection: Connect the "USB" port to your computer for USB audio interface functionality and potential firmware updates. The device supports OTG function.
Operating Instructions
The Matribox QME-50 offers a wide range of features and effects. Here's an overview of its core functionalities.
User Interface Overview

The unit features a color screen for easy navigation, several control knobs (VOLUME, GLOBAL, DRUM, PARA, BACK, SAVE), and two footswitches. The large pedal on the right acts as an expression pedal.
- Display: The central color screen shows the current preset, BPM, mode, and other relevant parameters.
- Control Knobs: Adjust various parameters of effects, volume, and global settings.
- Footswitches: Used for switching presets, engaging/disengaging effects, and activating the tuner or looper. The left footswitch is typically for "TUNER" and holding it activates the "LOOPER".
- Expression Pedal: Controls parameters like volume, wah, or other assignable effects in real-time.
Effect Matrix and Modeling

The Matribox QME-50 utilizes advanced White-Box digital modeling technology to produce high-quality tones. It features an "Effect Matrix" with up to 9 movable effect modules, allowing for flexible signal chain customization. There are over 130 high-quality effects available, categorized into modules such as:
- FX1 / FX2: General effects modules.
- AMP: Amplifier simulations.
- NR: Noise Reduction.
- CAB: Cabinet simulations.
- EQ: Equalization.
- MOD: Modulation effects (e.g., chorus, flanger).
- DLY: Delay effects.
- RVB: Reverb effects.
You can arrange these modules in any order within your signal chain to create unique sounds.
Built-in Functions
Beyond its core effects, the Matribox QME-50 includes several practical tools:
- Tuner: Activate the built-in tuner by pressing the designated footswitch (usually the left one).
- Drum Machine: Access and control the integrated drum machine for rhythm practice.
- Looper: Hold the designated footswitch (usually the left one) to engage the looper function, allowing you to record and playback phrases.
- USB Audio Interface: Connect to a computer via USB to use the Matribox QME-50 as an audio interface for recording or playback. It supports OTG (On-The-Go) functionality.
Maintenance
To ensure the longevity and optimal performance of your Sonicake Matribox QME-50, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the unit. Do not use abrasive cleaners, waxes, or solvents.
- Storage: Store the unit in a dry place, away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Avoid dropping the unit or subjecting it to strong impacts.
- Power Supply: Always use the specified DC 9V AC adapter (3A). Using an incorrect power supply can damage the unit and void the warranty.
- Connections: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.
Troubleshooting
If you encounter issues with your Matribox QME-50, try the following troubleshooting steps:
- No Power:
- Ensure the power adapter is correctly connected to the unit and a working power outlet.
- Verify that you are using the correct DC 9V, 3A power adapter.
- No Sound:
- Check all audio cable connections (instrument input, output to amp/mixer, headphones).
- Ensure the volume knob on the Matribox QME-50 is turned up.
- Check the volume settings on your connected amplifier, mixer, or headphones.
- Bypass any active effects to see if a specific effect is causing the issue.
- Distorted Sound:
- Check input levels to ensure they are not too high, causing clipping.
- Adjust gain and volume settings on the Matribox QME-50 and your amplifier.
- Ensure your instrument cables are not damaged.
- USB Audio Issues:
- Ensure the USB cable is securely connected to both the Matribox QME-50 and your computer.
- Check your computer's audio settings to ensure the Matribox QME-50 is selected as the input/output device.
- Try a different USB port or cable.
If the problem persists after trying these steps, please contact customer support.
Specifications
Warranty and Support
Warranty Information
The Sonicake Matribox QME-50 comes with a 6-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or use of incorrect power supplies.
Customer Support
For any questions, technical assistance, or warranty claims, please contact our customer support team:
- WhatsApp: +86 15580043427
- Email: 2589659452@qq.com
Please provide your product model and a detailed description of the issue when contacting support to ensure a quicker resolution.