1. Introduction
Thank you for choosing the LiitoKala Lii-600/Lii-700 Smart Battery Charger. This high-end intelligent fast charger features touch control, four independent charging channels, battery capacity testing, and multiple protection functions including anti-reverse connection, short circuit, overcharge, temperature control, and zero voltage activation. It automatically monitors the battery charging, discharging, and testing processes.
The Lii-600/Lii-700 is designed to charge various sizes of cylindrical Lithium-Ion and NiMH batteries, making it ideal for flashlights, electric tools, digital cameras, and other electronic devices. Its user-friendly design, robust functionality, and safety features make it an essential tool for battery management.

2. Safety Precautions
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- This charger is designed exclusively for cylindrical Lithium-Ion and NiMH rechargeable batteries. Do NOT use it for LiFePO4 batteries or any other battery types.
- Always read this manual thoroughly before use and adhere to the recommended charge current for your batteries. Avoid exceeding the battery's specified current limits.
- Use only the power adapter supplied with the charger. Using non-standard adapters may cause damage or fire.
- The charger may become warm during charging and discharging. Avoid direct contact with hot surfaces to prevent burns.
- Always unplug the power supply and remove batteries when the charger is not in use.
- Operate the charger only at room temperature and indoors.
- The test data provided by this product is for reference purposes only. For precise measurements, refer to professional instruments.
- Ensure proper ventilation during charging to prevent the accumulation of explosive gases.
3. Package Contents
Upon unboxing, please verify that all items listed below are present and in good condition:
- 1 x LiitoKala Lii-600 or Lii-700 Smart Battery Charger
- 1 x Power Adapter (EU/US/UK Plug, depending on region)
- 1 x User Manual (English & Chinese)
- (For Lii-700 model) 1 x Internal Resistance Test Pen


4. Product Overview
4.1 Physical Features
The charger features four independent battery slots, each capable of handling different battery sizes and types simultaneously. The front panel includes a clear LCD display and touch-sensitive controls for mode selection, current adjustment, and channel viewing.

4.2 LCD Display Introduction
The integrated LCD provides real-time information about each battery's status. Key parameters displayed include:
- Battery Type: Li-ion (3.7V) or Ni-MH (1.2V)
- Working Mode: CHARGE, DISCHARGE, TEST, REPAIR
- Channel: CH1, CH2, CH3, CH4
- Capacity: mAh (milliampere-hours)
- Time: h (hours)
- Current: mA (milliamperes)
- Voltage: V (volts)
- Energy Percentage: %
- Internal Resistance: mΩ (milliohms)
- Temperature: °C (Celsius)

4.3 Touch Points
The charger features 6 touch-sensitive points for operation:
- MODE: Used to select the working mode (Charge, Discharge, Test, Repair). A long touch also controls the LCD backlight.
- CURRENT: Used to select the charging or discharging current. A long touch allows selection between Auto and Manual operation modes.
- CH1, CH2, CH3, CH4: These correspond to the four independent battery channels. A short touch allows you to view data for the respective channel. A long touch on any channel point can toggle the LCD display on or off.
5. Setup
- Connect Power: Plug the supplied power adapter into the charger's DC input port (12V/5A) and then into a wall outlet. The LCD screen will illuminate, and the channel LEDs will flash red and green, indicating the charger is ready.
- Insert Batteries: Carefully insert rechargeable batteries into the slots, observing the correct polarity (+/-). If a battery is inserted correctly, its channel LED will turn red. If no battery is inserted, the display will show