Important Safety Information
Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in this manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
WARNING: The camera must be securely fixed to a ceiling or wall in accordance with the installation instructions to prevent potential injury.
Product Overview
The XIAOMI Smart Camera C300 Dual Camera Version is designed for comprehensive surveillance with its dual lens system, offering both a PTZ (Pan-Tilt-Zoom) camera for dynamic scenes and a fixed camera for a wide-angle view. It features 3MP resolution, Wi-Fi 6 connectivity, and advanced night vision capabilities.
Package Contents
- Xiaomi Smart Camera C300 Dual
- Wall Mount
- Power Adapter
- Charging Cable
- Wall Mounting Kit (wall plug × 2, screw × 2)
- Mounting Sticker
- User Manual
Setup
1. Connecting to Power Supply
- Plug the charging cable into the Type-C power port on the back of the camera.
- The camera automatically turns on, and the indicator quickly blinks orange.
Indicator Status:
- Keeping blue: Connected successfully/Working properly
- Blinking blue: Network error
- Blinking orange quickly: Waiting for connection
- Blinking orange slowly: Updating
Note: Do not forcibly rotate the camera's spherical body after turning on the camera. If the positioning of the lens is inaccurate, please calibrate it in the Xiaomi Home app.
2. Installing a microSD Card
- Make sure the camera is unplugged from power.
- Tilt the gimbal camera lens upward to expose the microSD card slot.
- Insert a microSD card into the slot with the contact surface facing downwards.
CAUTIONS:
- Before installing or removing a microSD card, make sure that the camera is unplugged from power.
- Use only genuine microSD cards (with a capacity of 16 GB to 256 GB) from a qualified supplier.
- It is recommended to use a microSD card with a minimum reading/writing speed of U1/Class 10.
3. Mounting the Camera
Desktop Placement Precaution:
- When placing on a desktop, consider positioning the camera near an edge or elevating the camera to optimize its fixed camera lens view.
Wall Mounting:
- Paste the mounting sticker where the camera needs to be installed, and drill two holes in the wall with a drilling tool according to the locating holes on the sticker. The hole is approx. 6 mm in diameter and approx. 30 mm in depth.
- Insert the two wall plugs into the drilled holes.
- Position the wall mount with the side marked with an arrow facing outward; align the wall mount holes with the holes in the wall; pass the screws through the wall mount holes, and tighten them into the wall plugs on the wall using a Phillips screwdriver.
- Align the grooves at the bottom of the camera with the raised part on the wall mount and snap them together. Hold the sides of the wall mount marked with "=" and rotate the camera clockwise until you hear a "click" sound, indicating the camera is securely locked in place.
- Adjust the camera to a desired angle by using the adjusting pivot on the wall mount. Hold and rotate the camera body to adjust the horizontal direction of the fixed camera lens, and along the direction marked with "=" on the wall mount, adjust the tilt angle of the fixed camera lens.
Wall-Mounting Precaution:
- The wall must be able to support at least three times the total weight of the camera.
4. Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app. Control your device with the app.
- Scan the QR code below to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi Home" in the app store to download and install it.
- Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow the instructions to add your device.
- Important Note for Chinese Version: Because this product is a Chinese version, you must change the country to "China" when connecting the "MI HOME" APP. The language can then be set according to your local country. If your Mi Home account is connected to other devices in other regions, it cannot be connected to China devices at the same time.
- Click "Profile" > Enter "Additional settings".
- Click "Region" > Change the Country to "Chinese mainland".
- Tap "+" at the upper right corner > Select "Scan".
- Click "Device Reset" (press and hold the reset button for about 7 seconds, and the reset will be successful when you hear the voice prompt).
- Select "wireless connection".
- Operate according to the prompts on the page.
- Wait for the binding to be successful.
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Please download and use Xiaomi Home app version 9.4 and above. The version of the app might have been updated, please follow the instructions based on the current app version. Make sure the camera is on and the network connection is stable during the connection. The indicator blinks orange quickly when waiting for a connection, and keeps blue once the camera is successfully connected.
5. Restoring Factory Settings
In case of changing the network that the camera is connected to or the Xiaomi Account in the Xiaomi Home app that the camera is paired with, press and hold the reset button for about 7 seconds until the indicator quickly blinks orange, indicating that the camera is successfully restored to factory settings. Then, reconnect the camera with the Xiaomi Home app.
Note: Restoring factory settings will not delete the content in the microSD card.
Operating Instructions
1. Real-time Surveillance
In the camera's plug-in of the Xiaomi Home app, you can view the real-time surveillance screen, adjust the sharpness of the image, change the horizontal and vertical viewing angles of the gimbal camera lens, enable long and short-focus linkage viewing, tap and hold any position on the screen of the fixed camera lens to prompt the gimbal screen lens to turn towards the target area to reveal detailed information, capture and record the screen, and make remote calls.
2. Infrared Night Vision
The camera can automatically switch modes according to the change in ambient light, such as switching to night vision mode in the dark. With built-in infrared night vision lights, the camera can clearly capture images/videos even in the dark.
3. Video Sharing
In the camera's plug-in of the Xiaomi Home app, you can select the device sharing option in the settings menu to share the camera with others. Users you share the camera with need to download the Xiaomi Home app and sign in with their Xiaomi Account.
4. Automatic Surveillance
When the home surveillance assistant feature is enabled, the camera will record videos once it detects human movement and changes in real time within its surveilled area. Then you will receive a notification pushed by the Xiaomi Home app.
- You can go to the camera's plug-in and select the home surveillance assistant option in the settings menu to enable or disable this feature.
- You can set the surveillance time to all day, daytime, nighttime, or any other time as needed, and customize the alert time interval in the app.
5. Virtual Fence
By manually framing a virtual fenced area on the screen of the fixed camera lens, the camera can detect when someone crosses the boundary. This event will be recorded in the home surveillance assistant and can also trigger a notification sent to the Xiaomi Home app.
- You can go to the camera's plug-in of the Xiaomi Home app and select the AI settings option in the settings menu to enable or disable this feature.
Maintenance
To ensure optimal performance and longevity of your XIAOMI Smart Camera C300 Dual, follow these maintenance guidelines:
- Cleaning: Gently wipe the camera lens and body with a soft, dry cloth. Avoid using harsh chemicals, cleaning solvents, or abrasive materials that could damage the surface or lens.
- Power Supply: Always use the original power adapter provided with the camera to prevent errors due to inadequate power supply.
- Environment: Keep the camera in a stable environment within the specified operating temperature range (-10°C to 45°C). Avoid high humidity, direct water exposure, or extreme temperatures.
- Firmware Updates: Regularly check for and install firmware updates through the Mi Home app to ensure your camera has the latest features and security enhancements.
Troubleshooting
If you encounter issues with your camera, refer to the following common solutions:
- Connection Issues (Chinese Version): If you have the Chinese version of the camera, you MUST set your Mi Home app region to "Chinese mainland" during setup. The camera will not connect if the app region is set to another country. If you have other devices connected to a different region, you may need a separate Mi Home account for this camera.
- Camera Not Found During Setup: Ensure the camera is powered on and the indicator light is blinking orange quickly (waiting for connection). Verify your Wi-Fi network is 2.4GHz, as the camera only supports this frequency. If the issue persists, try resetting the camera to factory settings.
- Inaccurate Lens Positioning: If the lens positioning is inaccurate after initial setup or movement, calibrate it within the Xiaomi Home app.
- Poor Image Quality: Ensure the lens is clean and free from obstructions. Adjust the sharpness settings in the Mi Home app. Avoid placing the camera facing reflective surfaces or in areas with extreme lighting contrasts (e.g., very bright areas next to very dark areas).
- MicroSD Card Not Detected/Recording: Ensure the microSD card is correctly inserted and is a genuine card with a capacity between 16GB and 256GB, and a minimum U1/Class 10 speed. Make sure the camera is unplugged from power before inserting or removing the card.
- No Bluetooth Connection: The camera uses Wi-Fi for primary connection to the app and network. Bluetooth is primarily used for initial pairing assistance, not for continuous connection or finding the camera. Ensure your phone's Bluetooth is enabled during the initial setup process.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | XIAOMI |
| Model Number | MJSXJ22CM |
| High Definition | 3.0 Megapixels |
| Resolution | 2304 x 1296 |
| Lens Quantity | Dual Lens |
| Lens (mm) | 2.8-6mm |
| Zoom Type | Digital zoom |
| Zoom | 4X |
| Optical Zoom | None |
| Viewing Angle | 360° |
| Movement Range (Pan) | 0°-360° |
| Movement Range (Tilt) | -10°-180° |
| Color Night Vision | Yes |
| IR Distance (m) | 10m |
| Video Compression Format | H.265 |
| Audio Output | Two Way Audio |
| AI Functions | Face Detection |
| Connectivity | IP/Network Wireless |
| Wireless Connection | Wi-Fi IEEE 802.11 a/b/g/n/ac/ax 2.4GHz/5GHz, Bluetooth 5.3 |
| Wi-Fi Maximum Output Power (2400-2483.5 MHz) | <20 dBm |
| Wi-Fi Maximum Output Power (5150-5350 MHz) | <20 dBm |
| Wi-Fi Maximum Output Power (5470-5725 MHz) | <20 dBm |
| Wi-Fi Maximum Output Power (5725-5850 MHz) | <14 dBm |
| Bluetooth Maximum Output Power (2402-2480 MHz) | <10 dBm |
| App Name | mihome / Mi home |
| Supported Mobile Systems | Android, iOS (Android 8.0 & iOS 12.0 or above) |
| Supported Operating Systems | No |
| Storage Function | microSD Card (16GB~256GB) |
| Power Supply | Normal |
| Input | 5V--2A |
| Power Consumption (W) | 5V--2A |
| Operating Temperature | -10°C~45°C |
| Dimensions (L x W x D)(mm) | 78 X 78 X 126mm |
| Net Weight | Approx. 373 g |
| Installation | Normal, Pendant Mount |
| Color | WHITE |
| Shell Material | Plastic |
| Alarm Type | Local Alarm |
| Certification | CE |
| Origin | Mainland China |
| Plug standard | chinese |
Note: The model parameters and safety information of the camera are shown in the user manual and at the bottom of the camera.
User Tips
- Many users praise the clear image quality and advanced features of the camera.
- The dual lens system is highly effective for comprehensive monitoring.
- Ensure you follow the app connection instructions carefully, especially regarding the server region for Chinese versions, to avoid connection difficulties.
- The camera works perfectly once correctly set up, providing reliable home security.
Warranty and Support
For further information, support, or warranty details, please visit the official Xiaomi website: www.mi.com.
You can also refer to the official user manual PDF for additional details: View User Manual (PDF).
Environmental and Regulatory Information
Cautions
- The operating temperature range for this camera is between -10°C and 45°C. Do not use the camera in environments with temperatures above or below the specified range.
- The camera is a precision electronic product. To ensure its normal operation, do not use the camera in environments with high humidity levels nor allow water to get into it.
- To ensure the camera's performance, do not place its lens facing or next to reflective objects, such as glass windows or white walls, as this will cause the image to appear overly bright in areas close to the camera and darker in areas further away, or cause the camera to produce white images.
- Make sure the camera is installed in an area with a strong Wi-Fi signal. Do not place the camera near objects that may affect its Wi-Fi signal, such as metal objects and microwave ovens.
- Please use the original power adapter provided with the camera to prevent camera errors due to inadequate power supply.
- Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
EU Declaration of Conformity
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type Xiaomi Smart Camera C300 Dual is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Türkiye (TR), Norway (NO), Switzerland (CH), Iceland (IS), Liechtenstein (LI), and Northern Ireland (NI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150–5250/5250–5350 MHz frequency range.
Frequency bands of 5 GHz Band 3 (5650 MHz–5725 MHz) are unavailable for the camera in Malaysia.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Shanghai Imilab Technology Co., Ltd. (a Mi Ecosystem company)
Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China