1. Introduction
Thank you for purchasing the Coolo Zigbee Scene Button Switch. This smart wireless button is designed to enhance your smart home experience by providing versatile control over your Zigbee-compatible devices. It supports single click, double click, and long press actions, allowing for intelligent linkage and scene activation within your smart home ecosystem, including Ewelink and Zigbee2MQTT.
Please read this manual carefully before use to ensure proper installation and operation. The images and diagrams provided are for reference only; please refer to the actual product for details.
2. Safety Information
- Keep the device away from water and high humidity environments.
- Do not attempt to disassemble or repair the device yourself.
- Use only the specified battery type (CR2032).
- Dispose of batteries according to local regulations.
- Ensure the device is installed in a stable location.
3. Product Overview
The Coolo Zigbee Scene Button Switch is a compact, wireless device designed for flexible control of your smart home scenes and devices.
Components:
- Button: The main interactive surface for triggering actions.
- Indicator LED: Provides visual feedback on device status (e.g., network configuration, button press).
- Battery Compartment: Located on the back for CR2032 battery.
Key Features:
- Single Click: Activates a predefined scene or action.
- Double Click: Activates a different predefined scene or action.
- Long Press: Activates a third predefined scene or action, or functions as a remote dimmer.
- Zigbee 3.0 Communication: Ensures broad compatibility with Zigbee gateways.
- Battery Powered: Uses a CR2032 3V DC battery for wireless operation.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | coolo |
| Model Number | Zigbee Push Button Switch |
| Item Type | SWITCHES |
| Switch Type | Push Button Switch |
| Features | Zigbee Push Button |
| Is Smart Device | Yes |
| Communication Method | Zigbee 3.0 |
| Smart Home Platform | Ewelink (Connect to ewelink ZigBee gateway), Zigbee2MQTT |
| Power Supply | Battery CR2032 3V DC (battery included) |
| Working Voltage | 3V |
| Standby Current | <8uA |
| Dimensions | 50mm x 50mm x 13mm (1.97in x 1.97in x 0.51in) |
| Control Distance | 25m (open area) |
| Operating Temperature | -10°C ~ 45°C |
| Working Humidity | 0-99%RH (<90%RH) |
| Life of Battery | 1 year (General use) |
| Material | Plastic |
| Certification | CE |
5. Setup
5.1 Battery Installation
- Rotate the back cover of the product counter-clockwise to open it.
- Remove the insulation sheet from the battery compartment. The indicator light will flash for 3 seconds, indicating the device is powered on.
- Insert the CR2032 3V DC battery into the battery holder, paying attention to the positive (+) and negative (-) terminals.
- Close the back cover by rotating it clockwise until secure.
5.2 Network Configuration (Pairing with Zigbee Gateway)
Note: This product requires a Zigbee gateway (hub) to function. It is compatible with Ewelink Zigbee gateway and can be integrated with Zigbee2MQTT.
- Ensure your Zigbee gateway is powered on and in pairing mode (refer to your gateway's manual for specific instructions).
- On the Zigbee Scene Button Switch, long press the button for 10 seconds.
- The indicator LED will flash rapidly, indicating that the device has entered network configuration mode.
- On your smart home APP (e.g., Ewelink), go to the "Add Device" interface and select "Gateway Search Device" or similar option.
- The APP will indicate when the device has successfully connected to the gateway.
6. Operating Instructions
Once paired with your Zigbee gateway, you can configure various actions for the button within your smart home application.
6.1 Button Functions:
- Single Click: Press and release the button once.
- Double Click: Press and release the button twice in quick succession.
- Long Press: Press and hold the button for more than 3 seconds.
Each button action (single click, double click, long press) can be assigned a different smart scene or device control within your smart home APP. The indicator LED will light up briefly with each button operation.
6.2 Smart Scene Linkage:
To control other devices or activate scenes, you need to set up linkage rules in your smart home APP. For example:
- Single Click: Turn on/off a Zigbee bulb.
- Double Click: Activate a "Movie Night" scene (dim lights, close smart curtains).
- Long Press: Adjust the brightness of a smart light (remote dimmer function).
7. Maintenance
7.1 Battery Replacement:
The battery life is approximately 1 year under general use. When the device stops responding or the indicator LED does not light up, it's time to replace the battery.
- Rotate the back cover counter-clockwise to open the battery compartment.
- Remove the old CR2032 battery.
- Insert a new CR2032 3V DC battery, ensuring correct polarity.
- Close the back cover by rotating it clockwise until secure.
7.2 Cleaning:
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or liquids.
8. Troubleshooting
- Device not responding: Check the battery. Replace if necessary. Ensure the device is within range of the Zigbee gateway.
- Cannot pair with gateway: Ensure the gateway is in pairing mode. Long press the button for 10 seconds until the LED flashes rapidly. If issues persist, try resetting the device (refer to gateway manual for specific reset procedures if available, or re-insert battery after 10 seconds).
- Long press function not working: Verify that the long press action is correctly configured in your smart home APP. Some platforms might require specific settings for this function.
- Button not recognized as a multi-functional switch: Ensure your Zigbee gateway and smart home platform fully support the Zigbee 3.0 protocol and multi-press events. Some older gateways or platforms might only recognize basic on/off commands. For Home Assistant, it often needs to be treated as an event.
- Issues with Tuya Gateway: Please note that this device is explicitly stated to work with Ewelink Zigbee hub and Zigbee2MQTT, but not with Tuya Gateway. Users have reported that it may go offline and become unusable with Tuya.
- Scenes not activating: Confirm that the scenes are correctly set up in your smart home APP and linked to the specific button actions (single, double, long press).
9. User Tips
- This button is excellent for its small and discreet design.
- It connects flawlessly with Home Assistant and is easy to integrate.
- When integrating with Home Assistant, ensure you configure it to treat button presses as events for full functionality.
10. Frequently Asked Questions (FAQ)
- Q: What is the power supply for the button?
- A: The button is powered by a CR2032 3V DC battery.
- Q: What communication protocol does it use?
- A: It uses the Zigbee 3.0 communication protocol.
- Q: Is a Zigbee hub required?
- A: Yes, a Zigbee hub or gateway is required for the button to function and connect to your smart home system.
- Q: Can it be used with Home Assistant?
- A: Yes, it is designed to work with Home Assistant, particularly via Zigbee2MQTT.
- Q: Does it work with Tuya Gateway?
- A: The product description indicates it works with Ewelink Zigbee gateway and Zigbee2MQTT, but explicitly states "(Except Tuya Gateway)". Users have reported compatibility issues with Tuya.
11. Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
For technical assistance, please contact your retailer or the manufacturer's customer support.