1. Safety Warnings
Failure to follow these safety warnings may result in fire, explosion, serious injury, or death.
- This product is designed for outdoor use or in a well-ventilated environment only. Do not use inside tents, cars, rooms, or any other enclosed spaces.
- Avoid direct sunlight or other high-temperature environments.
- If you detect any gas leakage, immediately stop using the product.
- The product has a precise structure; do not attempt to modify it, as this may lead to danger.
- Never disassemble or install the gas tank while the stove is lit or near an open flame.
- Keep away from all flammable and explosive materials.
- When lighting the stove, do not place your head, hands, or any part of your body directly above the burner to avoid burns.
- The metal parts of the furnace head become extremely hot during use and for at least 5 minutes after use. Do not touch them.
- Gas tanks are not refillable. Attempting to refill may cause accidents.
- Children under 12 years old must not use this product unsupervised.
2. Product Overview
The BRS-TS20 Reactor Head is a versatile outdoor cooking and heating tool designed for camping, hiking, and other outdoor activities. It features an integrated reactor for efficient infrared combustion, high thermal efficiency, and windproof performance. It can be used for boiling water and as a flameless radiant heater.
Key Features:
- Integrated Reactor: Infrared combustion for wind and air saving, high thermal efficiency.
- High Thermal Efficiency: Up to 70%, capable of boiling 1 liter of water in approximately 3 minutes.
- Multi-purpose: Functions as a powerful stove for cooking and a flameless infrared heater.
- Durable Construction: Made from stainless steel, aluminum alloy, and copper.
Available Heat Collection Pots (Sold Separately or as Kits):
The BRS-TS20 system is compatible with various heat collection pots, suitable for different group sizes:
- 2.5L Pot: Ideal for 4-5 people.
- 1.7L Pot: Ideal for 2-3 people.
- 1L Pot: Ideal for 1-2 people.

Image: Three BRS heat collection pots (2.5L, 1.7L, 1L) on gas stoves, illustrating the different capacities suitable for varying group sizes.
3. Setup
What's in the Box:
- BRS-TS20 Reactor Head (main unit)
- Instruction Manual (this document)
Note: Gas tanks and heat collection pots are typically sold separately or as part of specific kits.
Gas Tank Installation:
- Ensure the valve switch on the BRS-TS20 Reactor Head is fully closed by turning it clockwise.
- Carefully connect the valve body of the reactor head to the gas tank. Screw it on firmly until it is securely tightened.
IMPORTANT: Before ignition, always check for gas leakage. If you detect any odor (e.g., onion-like smell), immediately stop and do not attempt to ignite the stove. Ensure connections are clean and free of debris.

Image: The BRS-TS20 Reactor Head properly installed on a gas tank, ready for operation.
4. Operating Instructions
Ignition:
- Slowly turn the valve switch counter-clockwise to open the gas flow. Do not open it too wide initially.
- Immediately use an external ignition source (e.g., lighter, match) to light the furnace head.
WARNING: Do not place your head or any other body part directly above the stove during ignition.
Using as a Stove (Boiling Water):
Once ignited, the BRS-TS20 provides efficient heat for cooking and boiling water. Its integrated reactor design ensures high thermal efficiency.
- Thermal Efficiency: Up to 70%.
- Boiling Time: Approximately 3 minutes to boil 1 liter of water (under optimal conditions).
- Gas Consumption: Approximately 79g/hour.
- The special heating metal wool inside the reactor can reach temperatures of up to 800°C.

Image: A close-up view of the glowing metal wool within the reactor, demonstrating the intense heat generated for high thermal efficiency.
Using as a Heater:
The BRS-TS20 can also function as an effective flameless infrared radiant heater, providing warmth in cold outdoor conditions.
- Flameless Operation: Converts gas energy completely into infrared radiant heat without an open flame.
- Efficient Heating: Provides good heating effect for personal warmth or small enclosed spaces (ensure adequate ventilation).

Image: The BRS-TS20 being used as a heater, with hands placed above the glowing surface to absorb radiant heat.
High Altitude Performance:
The BRS-TS20 is designed to perform reliably even at high altitudes.
- Tested successfully at altitudes up to 4,860 meters.

Image: The BRS-TS20 operating in a snowy, high-altitude environment, demonstrating its performance capabilities in challenging conditions.
Closing the Stove:
- Turn the valve switch clockwise until it is fully closed and the flame extinguishes.
- Allow the stove to cool completely for at least 5 minutes before handling.
- Once cooled, carefully unscrew the reactor head from the gas tank.
5. Maintenance
General Care:
- Keep the stove dry and clean to prevent corrosion.
- Discoloration of the furnace surface during use is normal and does not affect performance.
Pre-Use Checks:
- Before each use, inspect the O-ring seal at the connection between the valve body and the gas tank to ensure it is present and intact.
- Keep the connection area between the valve body and the gas tank clean to prevent airway blockages.
Storage:
- Always separate the stove from the gas tank before storing.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
Gas Leakage:
- Symptom: Odor of gas (e.g., onion-like smell) detected during installation or operation.
- Solution: Immediately turn off the gas supply. Check all connections for tightness. Inspect the O-ring seal for damage or misalignment. If the issue persists, do not use the stove and seek professional assistance.
Flame Issues (when using new gas tank or high pressure):
- Symptom: Flames float above the metal mesh and the metal sponge does not glow red.
- Solution:
- Slightly reduce the gas flow by turning the valve clockwise.
- Wait 1-3 minutes for the flame to settle and burn into the metal mesh.
- If necessary, further reduce the gas flow for proper ignition within the mesh.
7. Specifications
| Parameter | Value |
|---|---|
| Ignition Mode | External ignition source |
| Fuel Type | Butane gas, Propane gas |
| Combustion Power | 1.1 kW |
| Gas Consumption | Approx. 79 g/h |
| Material | Stainless steel, Aluminum alloy, Copper |
| Heat Efficiency | Up to 70% (CE standard not less than 50%) |
| Weight | 0.214 kg |
| Storage Size | Φ105 x H75 mm |
8. User Tips
- Choose the Right Pot Size: Consider the available heat collection pot sizes (1L, 1.7L, 2.5L) and select the one that best matches your group size and cooking needs for optimal efficiency.
- Ventilation is Key: Always ensure adequate ventilation when operating the stove, even when using it as a heater, to prevent carbon monoxide buildup.
- Pre-Check Connections: A quick check of the gas tank connection and O-ring before each use can prevent potential issues.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's terms of sale or contact the retailer where you purchased this product.
A downloadable PDF version of this manual may be available from the product's official listing or manufacturer's website.