1. Introduction
Thank you for choosing the GMAIPOP F410 4-Channel WiFi Dashcam. This device is designed to provide comprehensive video surveillance for your vehicle, featuring 1080P Full HD recording, night vision capabilities, G-Sensor for emergency recording, parking monitoring, and seamless loop recording. With its 4-channel lens system (front, left, right, and rear), you can capture a 360° view around your car. This manual will guide you through the installation, operation, and maintenance of your dashcam.

The GMAIPOP F410 Dashcam, offering 360° recording with multiple advanced features.
2. Product Overview
2.1. Dashcam Components

Front view of the dashcam with its suction mount and multiple lenses.
2.2. Buttons and Ports

Detailed view of the dashcam's buttons and ports.
| No. | Feature | Function |
|---|---|---|
| 1 | Reset hole | Reset the Dashcam. |
| 2 | Power button | Long-press for ~3s to turn ON/OFF. |
| 3 | OK button | Short-press once to start/stop video recording. Play/pause current video in playback mode. Enter/save settings in menu. |
| 4 | Up button | Scroll up in menu. Switch display windows (front, rear, left/right camera). Scroll to previous video files in playback mode. |
| 5 | Down button | Scroll down in menu. Mute audio recording in video mode. Scroll to next video files in playback mode. |
| 6 | Menu/Mode | Long-press to enter Menu Settings (non-recording). Short-press to exit Menu. Short-press to enter Video Playback Mode (non-recording). |
| 7 | Power slot (USB-C) | Connect a USB cable or car charger. |
| 8 | Rear camera port | Connect a rear camera. |
| 9 | TF Card slot | Insert a micro-SD card to record and save videos. |
| 10 | Fill light | Lights for right & left cameras, activate automatically in low brightness. |
3. Installation
3.1. Installing the Front Dashcam
- Clean the Windshield: Ensure your windshield is free from dust, particles, and grease.
- Insert Suction Bracket: Insert the suction bracket into the dashcam and ensure the protective film is removed from the suction cup.
- Attach Dashcam: Attach the dashcam with the suction mount to the cleaned windshield. Adjust the camera lens to point forward towards the center of the road.

Clean the windshield thoroughly before installation.

Insert the suction bracket into the dashcam.

Dashcam mounted on the windshield.
Important Notes for Front Dashcam Installation:
- Ensure the installation position is cleaned correctly.
- Verify the protective film is removed from the suction cup and the cup is clean.
- Make sure the suction of the bracket is locked tightly. If not, it may drop during video recording.
3.2. Installing the Car Charger
Connect the car charger to the camera's USB-C port. Route the cable according to one of the methods below:
Wiring Method A:

Car charger cable routing method A.
Wiring Method B:

Car charger cable routing method B.
Please Note:
Use the original car charger provided to avoid faults or incompatibility. The dashcam requires continuous power from the car charger to operate.
3.3. Installing the Rear Camera
- Insert Rear Cam: Insert the rear camera into the designated port on the dashcam body.
- Route Rear Camera Cable: Install the rear camera's cable according to one of the wiring diagrams below:
- Hide Cable (Top Panel): Hide the cable into the top panel of the car.
- Loosen Side Panel: Slightly loosen the side panel and carefully insert the cable, especially if airbags are present.
- Insert Cable (Door Seal): Insert the cable along the door's rubber seal, continuing until you reach the trunk area.
- Loosen Trunk Panel: Loosen the trunk's panel and route the cable as per the red diagram.
- Connect Red Cable (Reversing Light): Connect the rear camera's red cable to the positive pole of the reversing light. This connection enables the reversing image to display automatically when the car is in reverse. If you do not need this feature, you may skip this step.
- Attach 3M Tape: Attach the 3M sticky tape to the rear camera's bracket and adjust the angle.
- Secure Rear Camera: Secure the rear camera in the middle and above the license plate frame.
- Connect Wired Cable: Connect the rear camera to the wired cable, aligning the two arrows for a proper connection.

Insert the rear camera into the dashcam body.

Wiring Method A

Wiring Method B

Hide the cable in the top panel.

Loosen side panel to route cable.

Route cable along the door's rubber seal.

Route cable through the trunk panel.

Connect the red cable to the reversing light for automatic display.

Attach 3M tape to the rear camera bracket.

Secure the rear camera above the license plate.
Important Notes:
Ensure all connections are secure for optimal functionality.
4. App Setup & Usage
The GMAIPOP F410 Dashcam supports WiFi connectivity for easy management via a smartphone app. The recommended apps are Framefox or Viidure.
4.1. App Download and Installation
- Scan QR Code: Scan the QR code below to download the app.
- Install and Launch: Install the app and launch it. Select "Viidure" or "Framefox" from the menu.

iOS App QR Code

Android App QR Code
4.2. Adding the Device (WiFi Connection)
For iPhone:
- Go to your phone's Wi-Fi settings.
- Select the camera's Wi-Fi network (e.g., "F410-12dc0e").
- Enter the default Wi-Fi password: 12345678.
- Once connected, open the "Viidure" app and complete the device addition.
For Android:
- Open the "Viidure" app.
- Tap "Add Camera" and follow the on-screen guide.
- In your phone's system Wi-Fi settings, select the camera's Wi-Fi network and enter the default password: 12345678.
- After connecting, return to the app to complete the device setup.

The dashcam app interface on a smartphone.
4.3. App Interface Overview
- Camera: Manage your Dashcam, add/view/delete devices, and enter video preview mode.
- Photo Album: Access and manage pictures or videos downloaded from the Dashcam.
- More: Adjust app settings (e.g., language preferences), provide feedback, or access additional information.
4.4. Dashcam Functions via App
- Taking Photos: Control the Dashcam to capture photos, which are saved directly to the device.
- Video Playback and Full Screen: Switch between full-screen video and a zoomed-out view.
- Camera Files: Access the Dashcam's file list, organized into categories such as Loop Recordings, Photo Files, Emergency Events, and Parking Monitoring.
- Camera Settings: Adjust settings like recording resolution and microphone controls.
4.5. Downloading and Playing Files
- File Download: Navigate to Camera Files in the app, select desired photos or videos, and tap Download to save them to your phone's Photo Album.
- Managing Photo Albums: Access the Photo Album to organize and manage downloaded media. Files are arranged by date. Use the Select option for batch operations. Categories include Videos, Pictures, and Emergency Documents.
- Video Playback Options: Browse videos at varying speeds, from slow motion (e.g., 1 frame per second) to fast-forward (e.g., 10x speed).
- Document Editing: Use the app's editing features to enhance your media. For images, you can crop, apply filters, and beautify. For videos, you can clip segments, add music, and perform other customizations.
Official product video demonstrating unboxing, installation, and app usage.
5. Operation
5.1. Recording
- Automatic Recording: The dashcam is designed to start recording automatically when the vehicle's ignition is turned on, provided it is connected to a continuous power source.
- Manual Recording: Short-press the OK button (3) once to manually start or stop video recording.
- Loop Recording: The dashcam automatically overwrites the oldest unlocked video files when the micro-SD card is full, ensuring continuous recording.
- G-Sensor: In case of a sudden impact or collision, the G-Sensor automatically locks the current video segment (10 seconds before and 30 seconds after the event) to prevent it from being overwritten.
- Parking Monitor: When enabled, the dashcam will turn on and auto-record if a collision or shaking is detected while the vehicle is parked. This feature typically requires a hardwire kit for continuous power.
- Night Vision: The dashcam features night vision functionality for clear recordings in low-light conditions.
5.2. Playback
Method 1: Playback on PC
Take out the micro-SD card from the dashcam and insert it into a card reader connected to your PC. You can then play back the video files directly on your computer.
Method 2: Playback on the Dashcam
- Stop any active recording.
- Short-press the MENU button (6) to enter Playback Mode.
- Use the UP button (4) and DOWN button (5) to scroll through and select video files.
- Short-press the OK button (3) to play or pause the selected video.
- To delete or protect a current file, long-press the MENU button (6).
- To exit Playback Mode, short-press the MENU button (6) again.

Dashcam screen in playback mode showing multiple camera views.
6. Maintenance
- Cleaning: Regularly clean the camera lenses and screen with a soft, dry cloth to ensure clear recordings. Avoid using harsh chemicals.
- SD Card Management: It is recommended to format the micro-SD card periodically (e.g., once a month) within the dashcam's settings to maintain optimal performance and prevent data corruption. Replace old or slow SD cards with high-quality Class 10 or higher cards.
- Firmware Updates: Check the official app or website for any available firmware updates to ensure your dashcam has the latest features and bug fixes.
- Temperature: Operate the dashcam within the specified working temperature range (-20℃ to 65℃) to prevent damage.
7. Troubleshooting
- Dashcam not turning on: Ensure the car charger is properly connected and the vehicle's power outlet is functioning. Long-press the Power button for 3 seconds.
- Recording issues (e.g., stops recording, error messages):
- Check if the micro-SD card is inserted correctly and is a high-quality Class 10 or higher card.
- Format the micro-SD card in the dashcam's settings.
- If the card is full and loop recording is not functioning, replace the card or manually delete old files.
- Rear camera not recognized:
- Ensure the rear camera cable is securely connected to the dashcam's rear camera port.
- Verify all wiring for the rear camera is correctly installed as per the diagrams in Section 3.3.
- WiFi connection issues:
- Ensure the dashcam's WiFi is enabled.
- Double-check the Wi-Fi password (default: 12345678).
- Try restarting both the dashcam and your smartphone's Wi-Fi.
- Ensure you are within close proximity to the dashcam for a stable connection.
- Parking mode not working continuously: The internal battery is small and primarily for emergency power. For continuous parking monitoring, the dashcam requires a hardwire kit connected directly to your vehicle's power system.
- Date/Time resetting: This can sometimes occur if the dashcam loses power completely. Ensure a stable power connection.
- No display/Black screen: Check power connection. If the screen is on but black, ensure lenses are not covered.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GMAIPOP |
| Item Type | Car DVR (Portable Recorder) |
| Number Of Lenses | 4 |
| Camera Resolution | 1920x1080 (FHD) |
| Pixels | 200Mega |
| Imaging Sensor | Sony IMX307 |
| View Angle | 170° |
| Aperture | F2.0 |
| Maximum Video Frame Rate | 30 fps |
| Video Code | H.264 |
| Video Format | AVI |
| Display Size | 3"-5" (IPS) |
| Built-in Screen | Yes |
| Touch Screen | No |
| Screen Ratio | 16:9 |
| Max External Memory | 128G |
| Memory Card Required Reading Speed | Class 10 |
| Special Features | G-Sensor, Display Rotate, Loop-Cycle Recording, NightShot Function, Rear Camera, Audio Recorded |
| Power Source | Corded Electric |
| Battery | Built-in Lithium battery (150mA) |
| Battery Life | Please connect to the power supply |
| Cable Length | Car charger: 3 m / Rear cable: 6 m |
| Working Temperature | -20℃ to 65℃ |
| APP Compatibility | Framefox / Viidure |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), English, French, Japanese, Korean, Russian, Spanish |
| Interface | AV-In, Wi-Fi, Micro SD/TF |
| Certification | CE, FCC |
9. User Tips
- SD Card Quality: Always use a high-quality micro-SD card (Class 10 or higher) from a reputable brand to avoid recording errors and ensure smooth operation. Some users have reported issues with unrecognized cards or full card errors when using lower quality or incompatible cards.
- Hardwiring for Parking Mode: For continuous 24-hour parking monitoring, it is highly recommended to use a hardwire kit to connect the dashcam directly to your car's fuse box. The built-in battery is primarily for emergency power and will not sustain long-term parking surveillance.
- App Connectivity: If you experience difficulty connecting to the dashcam's WiFi via the app, try restarting both the dashcam and your phone's WiFi. Ensure you are using the correct default password (12345678).
- Rear Camera Functionality: If the rear camera is not recognized, double-check all cable connections, especially the red wire to the reversing light if you desire the automatic reverse display feature. Ensure connections are secure.
- Language Settings: The dashcam supports multiple OSD languages. If the language is not set to your preference, navigate through the menu settings to change it.
10. Warranty & Support
For any after-sales inquiries or technical support, please contact the manufacturer via email at: ricardozed23@gmail.com.
A detailed user manual in PDF format is also available for download. You can find it by searching for "Item guides & documents" on the product page or by visiting the following link: User manual (PDF).