Lucky Sonar Fish Finder FF1108-1CLA User Manual

1. Introduction

Thank you for choosing the Lucky FF1108-1CWLA Fish Finder. This product is designed for both amateur and professional fishermen to accurately locate fish, determine water depth, and identify bottom contours. It is suitable for use in various water environments such as oceans, rivers, and lakes, making it an ideal tool for enhancing your fishing experience.

The FF1108-1CWLA features two primary user modes: WIRELESS and SIMULATION.

2. Package Contents

Please check the package carefully to ensure all items are present:

• 1 x Handheld Wireless Receiving Host (Display Unit)
• 1 x Transducer with 26ft / 8M Wire (Wired Transducer)
• 1 x Wireless Sonar Sensor (Wireless Transducer)
• 1 x USB Charging Cable
• 1 x USB Adapter Charger
• 1 x Vehicle Charger
• 1 x Neck Strap
• 1 x User Manual

3. Specifications

4. Setup

4.1 Charging the Wireless Sonar Sensor

1. Unscrew the cover of the wireless sonar sensor.
2. Connect the USB charging cable to the charging port on the sensor.
3. Connect the other end of the USB cable to the USB adapter charger or vehicle charger.
4. The charging indicator light (red) will be on during charging and turn off when fully charged.
5. When the probe encounters water, the power-on indicator light (blue) will be on.
6. After charging, tighten the cover of the sonar transmitter to ensure it is waterproof.

4.2 Wired Transducer Setup

1. Adjust the sensor float to be at least 18 centimeters away from the sensor.
2. Connect the wired transducer probe to the receiver (display unit).
3. Turn on the receiver (display unit).

4.3 Wireless Transducer Setup

1. Fix the wireless transmitter to your fishing line.
2. Put the wireless transmitter into the water.
3. Turn on the receiver (display unit).

Video demonstrating the setup and use of the wired transducer.

5. Operating Modes

The FF1108-1CWLA offers two user modes:

• WIRELESS Mode: This mode is used when operating the fish finder with the wireless sonar sensor. The signal indicator will be displayed on the screen when in this mode.
• SIMULATION Mode: This mode is for learning how to use the system with simulated sonar data. You can access Simulation mode by pressing the Right Arrow Key once from the User Mode menu.

To switch between these modes, press the POWER-MENU key until the User Mode menu appears, then use the arrow keys to select your desired mode.

6. Display View and Controls

The FF1108-1CWLA displays underwater information in an easy-to-understand format. The top of the display corresponds to the water surface at the transducer, and the bottom of the display corresponds to the automatically selected Depth Range for the current water depth. The Bottom Contour varies as the depth under the boat changes. Digital readouts provide precise information for depth, fish, and water temperature.

As the boat moves, terrain and bottom composition variations are displayed. Fish, baitfish, and thermoclines (underwater temperature changes) are displayed when detected. Underwater conditions vary greatly, so some experience and interpretation is needed to realize all the benefits of the FF1108-1CWLA. Use the picture as a guide to the most common conditions and practice using the FF1108-1CWLA over known bottom types.

Controls:

• Power On/Off: Press the POWER-MENU key for 5 seconds to turn the unit ON. Press and hold the POWER-MENU key until the unit shuts down to power OFF.
• Menu Key (M): Press to access menu settings.
• Left Arrow: Navigate menu options or decrease values.
• Right Arrow: Navigate menu options or increase values.

7. Settings

A simple menu system allows you to access and adjust the FF1108-1CWLA settings. Press the POWER-MENU key repeatedly to cycle through the menu settings. Use the UP and DOWN Arrow keys to adjust the settings. Most menu settings are saved to memory.

7.1 Language

Press the POWER-MENU key until LANGUAGE appears. Use the arrow keys to select the desired language. The default language is English.

7.2 Brightness

Press the POWER-MENU key until BRIGHTNESS appears. Use the arrow keys to adjust the screen brightness.

7.3 Sensitivity

Press the POWER-MENU key until SENSITIVITY appears. Sensitivity controls how much detail is shown on the display. Increasing sensitivity shows more sonar returns from small baitfish and suspended debris, but the display may become cluttered. Decreasing sensitivity eliminates clutter but may also hide weaker fish returns. Adjust between 1-10.

7.4 Depth Low Limit

Press the POWER-MENU key until Depth low limit appears. Automatic is the default setting, where the lower range is adjusted by the unit to follow the bottom. Manual settings range from 1 to 45 meters.

NOTE: In manual operation, if the current depth is greater than the depth range settings, the bottom will not be visible on the display. Select AUTO to return to automatic operation.

7.5 Depth Upper Limit

Press the POWER-MENU key until Depth upper limit appears. Select Auto to magnify the area around the bottom, revealing fish and structure close to the bottom that might not be visible during normal operation. When set to Auto, upper and lower Depth Ranges are automatically adjusted. Select Off to return to normal operation. Manual settings range from 1 to 45 meters.

7.6 Fish Alarm

Press the POWER-MENU key until FISHALARM appears. Select Off for no fish alarm, or choose one of the following symbols to set the alarm: Large fish only, Large/Middle fish, or Large/Middle/Small fish. An alarm will sound when the FF1108-1CWLA detects fish that correspond to the alarm setting. Fish Alarm will only sound if Fish ICON is also set to On.

7.7 Fish Icon

Press the POWER-MENU key until FISH ICON appears. Select Off to view "raw" sonar returns, or On to view Fish symbols. Fish ICON uses advanced signal processing to interpret sonar returns and will display a Fish Symbol when very selective requirements are met. A select number of possible fish returns will be displayed with their associated depth.

7.8 Units

Press the POWER-MENU key until UNITS appears. Use the arrow keys to select the desired units for depth and temperature (M/C, FT/C, M/F, FT/F).

7.9 Shallow Alarm

Press the POWER-MENU key until SHALLOW ALARM appears. Select OFF for no Shallow Alarm, or select a depth (1 to 45 meters) to set the alarm. An audible alarm sounds when the depth is equal to or less than the setting.

8. Multiple Usage Scenarios

The Lucky Fish Finder is versatile and can be used in various ways:

• Use Floats: Attach the transducer to a float for easy deployment.
• On Ice: Suitable for ice fishing, place the transducer in a hole in the ice.
• Fix To The Boat Hull: Mount the transducer to the boat hull for continuous use.
• Use A Pole: Attach the transducer to a pole for precise positioning.

9. Maintenance

Follow these simple procedures to ensure your FF1108-1CWLA continues to deliver top performance:

• If the unit comes into contact with salt spray, wipe the affected surfaces with a cloth dampened in fresh water.
• Do not use chemical glass cleaners on the lens, as this may cause cracking.
• When cleaning the LCD protective lens, use a chamois and a non-abrasive, mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to avoid scratching the lens.
• Never leave the unit in a closed car or trunk; the extremely high temperatures generated in hot weather can damage the electronics.

9.1 Wireless Sonar Sensor Maintenance

• After using the Wireless sonar sensor in salt water, wipe the affected surfaces with a cloth dampened with fresh water.
• The Wireless sonar sensor Cuprum-switch must be rinsed with fresh water after exposure to salt water to prevent corrosion.
• If your Wireless sonar sensor remains out of the water for a long period, it may take some time to wet it when returned to the water. Small air bubbles can cling to the surface of the Wireless sonar sensor and interfere with proper operation. Wipe the face of the Wireless sonar sensor with a wet cloth to remove them.
• Never leave the Wireless sonar sensor in a closed car or trunk; the extremely high temperatures generated in warm weather can damage the electronics.

10. Troubleshooting

10.1 The FF1108-1CWLA loses signal in wireless User Mode.

If the FF1108-1CWLA, while in Wireless user mode, is not able to get an RF signal from the Wireless sonar sensor, the display will stop updating and "NO SIGNAL" will be displayed after several seconds. Whenever reception is lost or the Wireless sonar sensor is pulled out from the water for more than a few seconds, the display will show "NO SIGNAL" until the Wireless sonar sensor is placed back in the water and reception is regained.

• Line-of-sight: The Wireless sonar sensor uses line-of-sight wireless technology. If objects are placed between the FF1108-1CWLA and the Wireless sonar sensor, reception may be lost.
• Depth Range: The Wireless sonar sensor depth range is 3 to 147 feet (0.7 to 45 meters). Erratic readings may occur in water shallower than 3 feet. This product is not intended for use in swimming pools or small enclosed bodies of water.
• Reeling Speed: Reeling the Wireless sonar sensor too fast can cause loss of signal and the screen to freeze.
• Buoyant Balance: Check the buoyant balance between the Wireless sonar sensor and your tackle. Over 0.2 ounces will submerge the Wireless sonar sensor, causing signal loss.
• RF Distance: The Wireless sonar sensor may not obtain its maximum RF distance unless the water is smooth. Waves or chop may reduce the RF range significantly.

10.2 In very shallow water, I get gaps in the bottom reading and inconsistent digital depth indication.

The Wireless sonar sensor will work reliably in water 3 feet (0.7 meters) or deeper. The depth is measured from the Wireless sonar sensor. A Wireless sonar sensor to FF1108-1CWLA distance greater than its maximum RF distance may cause intermittent screen display. Excessively rough water may cause the Wireless sonar sensor to submerge, again losing contact.

10.3 The display shows fluctuating depth readings and excessive clutter, including vertical bars that may be drawn on top of fish icons.

This can be caused by various factors including water conditions and sensitivity settings. Adjust sensitivity as needed.

10.4 The screen jumps and the bottom has an abrupt change; sometimes a vertical line is missing or a black line from top to bottom is displayed.

This screen image jump is due to an automatic change in depth. New returns graphed at a different scale will not match up with the historic data already graphed at a higher or lower scale. Vertical lines can also occur as the radio signal from the Wireless sonar sensor is lost and then regained in rough water conditions.

11. User Tips

• Language Setting: The device supports English. If you need to change the language, navigate to the 'Language' setting in the menu.
• Water Contact for Operation: Ensure the transducer (wired or wireless) is properly submerged in water for it to function correctly. The metal probes on the wireless sensor must be in contact with water.
• Charging: Always fully charge the wireless sensor before use to ensure maximum operating time.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

A user manual in PDF format is available for download: Download User Manual (PDF)