Introduction
This manual provides instructions for the safe and efficient operation of your 3D Print Rechargeable Moon Lamp. Please read this manual thoroughly before use and retain it for future reference.
Video: Unboxing and assembly of the Moon Lamp, demonstrating its features and color changes.
Package Contents
Ensure all items are present in the package:
- 3D Print Moon Lamp
- Wooden Stand (3 beech wood pieces)
- Remote Control
- DC3.5*1.35 USB Charging Cable
- User Manual (this document)
Image: The Moon Lamp, remote control, and wooden stand, highlighting 4 lighting modes and 16 colors.
Specifications
| Feature | Specification |
|---|---|
| Model Number | moon light |
| Type | Night Light |
| Shape | Moon |
| Body Material | ABS |
| Light Source | LED bulbs |
| Wattage | 0-5W |
| Power Generation | Touch |
| Power Source | DC |
| Voltage | 3.7 V |
| Nominal Voltage | 3.7 V |
| Battery Type | Lithium Metal |
| Battery Capacity | 300 mAh |
| Charging Time | 2-3 hours |
| Light Duration | 6-8 hours |
| Luminous Flux | <60 |
| Is Bulbs Included | Yes |
| Is Batteries Included | Yes |
| Is Batteries Required | Yes |
| Certification | CCC, CE, ROHS |
| Material Feature | Environmentally-friendly, Biodegradable |
| Diameter | 5.9 inches / 15 cm |
Setup Instructions
1. Assemble the Wooden Stand
- Unpack the three beech wood pieces for the stand.
- Interlock the three pieces to form a stable triangular base.
- Place the Moon Lamp gently onto the assembled stand.
Image: Step-by-step assembly of the wooden stand for the Moon Lamp.
2. Initial Charging
Before first use, please charge the Moon Lamp fully.
- Locate the charging port at the bottom of the Moon Lamp.
- Connect the DC3.5*1.35 USB cable to the charging port.
- Connect the other end of the USB cable to a standard USB power source (e.g., computer, mobile phone charger, power bank).
- A blue light will indicate that the lamp is charging. The blue light will turn off when the lamp is fully charged.
- Charging typically takes 2-3 hours.
Image: Diagram illustrating the charging port and touch control switch, along with charging instructions.
Operating Instructions
Touch Control
- Turn On/Off: Touch the metal contact at the bottom of the lamp for approximately 1 second to turn it on or off.
- Change Color: Short touch the metal contact to cycle through different light colors.
- Adjust Brightness: Long press the metal contact to adjust the brightness of the current color.
Remote Control
The remote control offers more precise control over the lamp's functions.
Image: Remote control layout with buttons for power, brightness, 16 colors, and 4 lighting modes.
- ON/OFF: Press the "ON" or "OFF" button to power the lamp on or off.
- Brightness Adjustment: Use the "LOW/HIGH BRIGHTNESS" buttons to increase or decrease the light intensity.
- Color Selection: Press any of the 16 color buttons to select a specific color.
- Lighting Modes:
- FLASH: Cycles through colors quickly.
- STROBE: Flashes colors rapidly.
- FADE: Smoothly transitions between colors.
- SMOOTH: Gradually changes colors.
Image: The Moon Lamp showcasing its ability to display 16 different colors.
Care and Maintenance
- Clean the lamp surface with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Store the lamp in a cool, dry place when not in use for extended periods.
- Avoid exposing the lamp to extreme temperatures or direct sunlight.
Safety Precautions
- The product is not waterproof. Avoid contact with water or other liquids.
- Do not expose the product to strong acids or alkalis.
- Do not strongly beat or drop the product from high places to prevent damage.
- Keep out of reach of small children to prevent choking hazards from small parts.
- Do not attempt to disassemble or repair the lamp yourself. Contact customer support if issues arise.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp using the provided USB cable. Ensure the blue charging light illuminates. |
| Lamp does not respond to touch. | Battery is low or contact point is dirty. | Charge the lamp. Clean the metal contact point at the bottom of the lamp with a dry cloth. |
| Remote control not working. | Remote battery is dead or remote is too far. | Ensure the remote control has a working battery. Point the remote directly at the lamp and ensure it's within range. |
| Light is dim or flickers. | Low battery. | Recharge the lamp fully. |
User Tips
- For a relaxing atmosphere, use the fade or smooth lighting modes.
- The lamp is excellent for children's rooms as a night light due to its soft glow and multiple color options.
- Ensure the lamp is fully charged for optimal light duration (6-8 hours).
Warranty and Support
For any issues or inquiries regarding your Moon Lamp, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
This product is certified with CCC, CE, and ROHS standards.
A detailed user manual is also available in PDF format: View User Manual (PDF)
Notes on 3D Printing Technology
Due to the nature of 3D printing technology:
- The sphere edge may have a seam due to circuit installation requirements.
- A contour phenomenon may be visible on the object surface. This is a characteristic of the 3D printing process and not a defect.