Introduction
Thank you for purchasing the BQCC 9" Android 13 Octa Core Car Player. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the best experience from your device. Please read this manual thoroughly before installation and use.
Important Safety Information
- Before installation, please test the machine first to ensure it is in working order.
- Do not install the product directly into the car immediately after receiving it, as long-distance transportation may affect its functionality.
- Ensure all connections are secure and correctly wired to prevent damage to the unit or vehicle.
- If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact customer support.
Setup and Installation
Rear Interface Description
Familiarize yourself with the rear interface ports before connecting the device. Refer to the diagram below for port identification and function.
Figure 1: Rear Interface Ports - This diagram illustrates the various input and output ports on the back of the car player.
| Port | Function |
|---|---|
| FR OUT | Front Right Audio Output |
| FL OUT | Front Left Audio Output |
| RR OUT | Rear Right Audio Output (Some models) |
| RL OUT | Rear Left Audio Output (Some models) |
| SUBWOOF OUT | Subwoofer Output |
| VIDEO OUT | Video Output (Some models) |
| AUX R IN | Right Audio Input |
| AUX L IN | Left Audio Input |
| CVBS-IN-1 | Video Input-1 |
| F-CAM | Video Input-2 (Front Camera Input) |
| MIC | Microphone Input |
| 4G SIM CARD SLOT | 4G SIM Card Slot (Some models) |
| AMP CONT | Amplifier Control Line |
| 12P Connector | Heat Sink Fan Power Plug (Some models), 360 Panoramic Camera (Some models) |
| 10P Connector | BT/WiFi Antenna, R-CAM (Reversing Camera Input) |
| 8P Connector | CANBUS Protocol Box (Some models) |
| 6P/4P Connector | USB1/2 (USB Port) |
| GPS ANT | GPS Satellite Signal Antenna |
| 4G ANT | 4G Network Antenna (Some models) |
| RADIO ANT | Radio Antenna |
Power Cord Wiring Instructions
Proper wiring of the power cord is essential for the device to function correctly. Use a multimeter or 12V tester to identify your vehicle's wiring harness.
Figure 2: Universal Power Cord Wiring - This diagram shows the connections for the universal power cord and speaker outputs.
- Identify Wires:
- Key on