1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your TUMMASTER Addressable ARGB PC Chassis Decorative Light Strip. Please read this manual thoroughly before use to ensure proper functionality and safety.

Figure 1: TUMMASTER ARGB Enclosure Light Bar (Model JXDT-408) showcasing its vibrant lighting and compatibility with major motherboard RGB synchronization technologies.
2. Package Contents
Please check the package for the following items:
- ARGB PC Chassis Decorative Light Strip (Model JXDT-408 or JXDT-383)
- Integrated 5V 3-Pin ARGB connection cable
3. Setup and Installation
The light strip is designed for easy, tool-free installation within your PC chassis.
- Prepare the Surface: Choose the desired location inside your PC chassis. Ensure the surface is clean and dry for optimal adhesive performance. Wipe the fixed position clean.
- Apply the Light Strip: The light strip comes with pre-applied 3M adhesive backing. Carefully tear off the backing paper from the adhesive strip.
- Secure the Light Strip: Gently press the light strip onto the cleaned surface inside the chassis, ensuring it adheres firmly along its entire length.

Figure 2: The light strip features 3M adhesive backing for simple, tool-free installation.
- Connect to Motherboard (ARGB Sync): Locate a 5V 3-Pin ARGB header on your motherboard. Connect the female end of the light strip's 5V 3-Pin cable (labeled 'A' in Figure 3) to this header. This allows synchronization with your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
- Connect in Series (Optional): If you have other 5V ARGB products, you can connect them in series using the male end of the light strip's 5V 3-Pin cable (labeled 'B' in Figure 3).

Figure 3: Connectivity options. (A) 5V 3-Pin Female connector for motherboard synchronization. (B) 5V 3-Pin Male connector for daisy-chaining with other ARGB devices.
4. Operating Instructions
Once installed and connected:
- Power On: Turn on your PC's power supply.
- Activate Lighting: The ARGB lighting effects should automatically activate.
- Control Lighting: Use your motherboard's RGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize colors, patterns, and brightness of the light strip.

Figure 4: Example of the ARGB light strip installed and illuminated within a PC build.
5. Maintenance
The ARGB light strip requires minimal maintenance:
- Keep the light strip clean and free from dust. Use a soft, dry cloth to gently wipe the surface if needed.
- Avoid exposing the light strip to excessive moisture or direct liquids.
- Do not attempt to disassemble the light strip, as this will void any potential support.
6. Troubleshooting
If you encounter issues with your ARGB light strip, please refer to the following:
- Light strip does not light up:
- Ensure the 5V 3-Pin ARGB connector is securely plugged into the motherboard header.
- Verify that your motherboard's 5V ARGB header is functioning correctly.
- Check if the motherboard interface itself is damaged.
- If using an external ARGB controller (not included), ensure it is properly connected and powered.
- Lighting is abnormal or flickering:
- Check all connections for looseness.
- Ensure your motherboard's ARGB software is up to date.
- If connected in series with other devices, try connecting the light strip directly to the motherboard to isolate the issue.
If the ARGB lighting effect cannot be turned on correctly, or if the lighting is abnormal after checking the above, please contact customer service immediately for assistance.
7. Specifications

Figure 5: Product parameters table.
| Feature | Specification |
|---|---|
| Product Name | ARGB Enclosure Light Bar |
| Brand | TUMMASTER |
| Model Numbers | JXDT-408, JXDT-383 |
| Product Size (JXDT-408) | 408mm x 8mm x 5.5mm |
| Product Size (JXDT-383) | 383mm x 8mm x 5.5mm |
| ARGB Lighting Length | 383mm (for JXDT-383 variant) |
| Line Length (Cable) | 560mm |
| Lighting Interface | 5V 3-Pin ARGB |
| Connector Type | Male and Female Plug (for daisy-chaining) |
| Net Weight | 22g |
| Material | Rubber |
| RGB Support | Addressable RGB (A-RGB) |
| Origin | Mainland China |
Note: Dimensions are manually measured, and minor errors may occur.

Figure 6: Detailed dimensions of the ARGB light strip and cable.
8. User Tips
- Cable Management: Plan your cable routing before final installation to ensure a clean look and prevent interference with other components.
- Surface Preparation: A clean, oil-free surface is crucial for the 3M adhesive to bond effectively and prevent the strip from detaching over time.
- Test Before Final Placement: It's good practice to connect the light strip and test its functionality before permanently adhering it to ensure all connections are correct and the lighting works as expected.
9. Warranty and Support
For any product-related issues, technical support, or warranty inquiries, please contact the seller or the manufacturer's customer service. Please retain your proof of purchase for warranty claims.
For further assistance, refer to the official product page or contact customer support directly.
User manual (PDF) available at: Product User Manual PDF