coolo Tuya Zigbee Soil Moisture Sensor

Contents

Tuya Zigbee Soil Moisture Sensor User Manual

Smart Monitor Plants Moisture Tester, Flower Pot Soil Hygrometer, Garden Planting Humidity Meter

1. Introduction

This manual provides instructions for the Tuya Zigbee Soil Moisture Sensor, a smart device designed to monitor soil moisture and ambient environmental temperature and humidity for plants. It integrates with smart home ecosystems via a Zigbee gateway, allowing for remote monitoring and automation.

Before using this product, please read this manual carefully to ensure correct operation and to prevent damage to the device. The manufacturer is not responsible for any consequences arising from abnormal operation.

2. Safety Information

  • Always handle the device with care.
  • Do not immerse the entire device in water; only the sensor probe is designed for soil insertion. The waterproof rating allows for watering from top to bottom, but not full submersion.
  • Ensure correct battery polarity during installation.
  • Keep out of reach of children.
  • Do not attempt to modify or repair the device yourself.

3. Product Overview

3.1 Components

Tuya Zigbee Soil Moisture Sensor front view with labels
Figure 1: Front view of the sensor, highlighting Zigbee and Tuya integration, and measurement types (soil moisture, humidity, temperature).
  • Battery Cover: Protects the battery compartment.
  • Reset Key: Used for network configuration (long press for 3 seconds).
  • Indicator Light: Provides status feedback during operation and configuration.
  • Air Temperature and Humidity Sensor: Measures ambient conditions.
  • Soil Moisture Sensor: Probe inserted into soil to measure moisture levels.
Internal view of the sensor probe
Figure 2: Internal view of the sensor probe, showing the circuit board.

3.2 Features

  • Accurately detects soil humidity and ambient temperature.
  • Monitors flower water needs and temperature conditions.
  • Rust-proof, electrolytic, acid and alkali corrosion-resistant sensor probe for long life.
  • IP64 protection level prevents moisture from entering the device (good sealing).
  • Industrial-grade performance with low power consumption, high sensitivity, and stable performance.
  • Works with Tuya Smart App, Smart Life APP, Amazon Alexa, and Google Assistant.
  • Supports custom scene settings and can be linked with other Tuya devices via a Tuya ZIGBEE gateway.
Sensor features: rust-proof, IP64, industrial-grade performance
Figure 3: Key features of the sensor, including rust-proof design, IP64 protection, and industrial-grade performance.

4. Specifications

Parameter Value
Product Name Soil Moisture Sensor
Wireless Protocol Zigbee3.0
Soil Moisture Range 0% - 100%
Temperature Resolution 0.1°C
Humidity Resolution 3%
Air Temperature Range -20°C to 60°C
Air Humidity Range 0% - 100%
Battery Type LR03 AAA (2x)
Working Voltage DC 3.0V
Standby Current <20uA
Standby Time ≥12 Months
Working Temperature -10°C to 55°C
Working Humidity max 99%RH

4.1 Package Dimensions

  • Length: 15 cm
  • Width: 8 cm
  • Height: 5 cm
  • Weight: 0.043 kg

5. Setup

5.1 Battery Installation

  1. Gently pull up the battery cover to open the compartment.
  2. Insert two LR03 (AAA) batteries, paying close attention to the correct positive (+) and negative (-) pole directions.
  3. Close the battery cover securely.

5.2 Network Configuration (Pairing with Zigbee Gateway)

The device must be connected to a Zigbee gateway to function.

  1. Ensure the device is powered on (batteries installed).
  2. Press and hold the "Reset Key" button for 3 seconds until the red indicator light flashes, indicating the device has entered configuration network mode.
  3. Open your Tuya Smart App or Smart Life APP.
  4. Select your Zigbee gateway within the app.
  5. Follow the app's instructions to add a new device. The app will search for the sensor and complete the binding process.
Diagram showing integration with Tuya ZIGBEE gateway
Figure 4: The sensor integrates with a Tuya ZIGBEE gateway, enabling connection with other smart devices.

5.3 Physical Installation

  1. Before inserting the sensor into the soil, ensure that the surface of the soil moisture sensor probe is clean.
  2. Insert the sensor into the soil to a depth of no less than 2/3 of its length. Ensure that the sensing surface of the moisture sensor is in full contact with the soil.
  3. If the soil is too dry, you may first pour some water into the pot and then insert the sensor.
Sensor inserted into soil, showing depth
Figure 5: Proper insertion depth for the soil moisture sensor, indicating the standard line.

6. Operation

  1. After physical installation, wait for approximately 30 seconds to 1 minute for the device to detect the initial moisture level.
  2. The sensor will collect moisture and temperature/humidity values every 30 seconds.
  3. Data will be uploaded to the APP when the moisture value differs by 3%, the air temperature value differs by 0.3°C, or the air humidity value differs by 5%.
  4. Monitor the readings in your Tuya Smart App or Smart Life APP.
Sensor in soil displaying temperature and humidity readings
Figure 6: Visual representation of the sensor in soil, displaying real-time temperature and humidity readings.
App screenshot showing sensor data: Humidity, Temperature, Battery, RSSI, LQI
Figure 7: Example of sensor data displayed in a smart home application, including humidity, temperature, battery level, RSSI, and LQI.

7. Maintenance

  • Regularly clean the surface of the soil moisture sensor probe to ensure accurate readings.
  • The device is waterproof (IP64) and can withstand watering from the top, but it should not be fully submerged in water.
  • Replace batteries when indicated by the app or when readings become inconsistent.

8. Troubleshooting

  • Inaccurate Moisture Readings: Moisture detection may have some deviations. Users can perform calibration in the APP according to the actual situation. Ensure the sensor probe is clean and fully in contact with the soil.
  • Device Not Connecting/Offline: Ensure the device is within range of your Zigbee gateway. Check battery levels. Re-attempt network configuration if necessary.
  • No Data Updates: Verify that the device is connected to the Zigbee gateway and has sufficient battery power. Data updates are triggered by significant changes in readings (3% for moisture, 0.3°C for temperature, 5% for humidity) or every 30 seconds.

9. User Tips

  • Home Assistant Integration: If integrating with Home Assistant, you might need to add a custom quirk for the sensor to be fully recognized and display all entities beyond diagnostic ones. Consult Home Assistant community forums or documentation for specific quirk configurations.
  • For optimal performance, ensure the sensor is placed in a location where it can maintain a stable Zigbee connection to your gateway.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is also available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.