1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Universal AN6 2L Aluminum Fuel Surge Tank. A fuel surge tank is designed to prevent fuel starvation in high-performance vehicles during aggressive driving maneuvers such as hard cornering, acceleration, or braking. It maintains a consistent supply of fuel to the engine's main fuel pump, ensuring optimal engine performance.
2. Safety Information
WARNING: Working with fuel systems can be dangerous and may lead to fire, explosion, or serious injury if not performed correctly. Always exercise extreme caution.
- Ensure the vehicle's engine is turned off and cool before beginning any work.
- Disconnect the vehicle's battery to prevent accidental electrical discharge.
- Wear appropriate personal protective equipment, including safety glasses and gloves.
- Ensure adequate ventilation in your workspace.
- Keep fire extinguishers readily available.
- Professional installation by a qualified mechanic is highly recommended for this product.
3. Package Contents
Please verify that all items listed below are included in your package:
- 1x Aluminum Fuel Surge Tank (Black or Silver, depending on your selection)
- 1x Black Anodized pump clamp plate
- Pump mounting hardware
- O-rings
- Vibration damping mounts
- Mounting hardware (as shown in product images)
Note: Inlet/Outlet fittings are NOT included. You will need to purchase three (3) -6AN O-ring boss to -6AN fittings separately.
4. Specifications
| Feature | Detail |
|---|---|
| Product Name | Fuel Surge Tank |
| SKU | YH-HCG-02BK |
| Material | Billet Aluminum |
| Capacity | 2 Liters |
| Fuel Ports | 3x -6AN O-Ring Boss |
| Finish | Black Anodized (for black model) |
| Approximate Dimensions (W x H) | 150mm x 151mm |
| Top Plate Length | 146mm |
| Top Opening Diameter | 60.5mm |
| Port Spacing | 13mm |
| Application | Universal for Drift Racing, Drag Racing, Street Racing, and Track Day |
| Package Dimensions (L x W x H) | 23 cm x 20 cm x 16 cm |
| Package Weight | 1.261 kg |
5. Setup and Installation
Professional installation is strongly recommended for this product due to the critical nature of fuel system components and the potential safety risks involved. No detailed installation instructions or tools are included.
General Installation Guidelines:
- Pre-Installation Check: Before starting, ensure all components listed in Section 3 are present and undamaged. Confirm you have acquired the necessary three (3) -6AN O-ring boss to -6AN inlet/outlet fittings.
- Mounting Location: Select a secure and safe location within the vehicle, away from heat sources and moving parts. The location should allow for easy access for maintenance and inspection.
- Mounting the Tank: Use the provided vibration damping mounts and mounting hardware to securely fasten the surge tank to the chosen location. Refer to the product images for visual guidance on the mounting bracket design.
- Fuel Pump Installation (if applicable): If installing an internal fuel pump (not included), carefully insert it into the surge tank. Secure it using the provided black anodized pump clamp plate and O-ring, ensuring a tight seal.
- Fuel Line Connections: Connect the fuel lines to the -6AN O-Ring Boss ports on the surge tank. Ensure all connections are properly tightened to prevent leaks. Typically, one port is for fuel input from the main tank, one for output to the engine's high-pressure pump, and one for return fuel.
- Electrical Connections (if applicable): If an internal fuel pump is used, make the necessary electrical connections according to the pump manufacturer's instructions.
- Leak Check: After installation, perform a thorough leak check of the entire fuel system before operating the vehicle.
6. Operating Instructions
Once properly installed, the fuel surge tank operates automatically as part of your vehicle's fuel system. It functions by maintaining a small, constant reservoir of fuel around the high-pressure fuel pump. The vehicle's primary fuel pump continuously fills this reservoir, and any excess fuel is returned to the main fuel tank. This design ensures that the high-pressure pump always has an ample supply of fuel, preventing momentary fuel starvation that can occur during aggressive driving when the main fuel tank's fuel level might slosh away from the primary pump's pickup.
7. Maintenance
Regular maintenance is crucial to ensure the longevity and safe operation of your fuel surge tank and associated fuel system components.
- Periodic Inspection: Regularly inspect all fuel lines, connections, and the surge tank itself for any signs of leaks, cracks, corrosion, or damage. Address any issues immediately.
- Mounting Security: Check that the surge tank remains securely mounted and that the vibration damping mounts are in good condition. Tighten any loose fasteners.
- Fuel Quality: Always use clean, high-quality fuel to prevent contamination of the fuel system, which can lead to blockages or pump failure.
- Fuel Pump Maintenance: If an aftermarket fuel pump is installed within the surge tank, follow the specific maintenance recommendations provided by the pump manufacturer.
- Cleaning: Keep the exterior of the surge tank clean to prevent dirt and debris buildup.
8. Troubleshooting
If you encounter issues with your fuel system after installing the surge tank, consider the following troubleshooting steps:
- Fuel Starvation: If the engine still experiences fuel starvation, check the operation of the primary fuel pump, ensure there is sufficient fuel in the main tank, and inspect all fuel lines for kinks, blockages, or leaks. Verify the internal fuel pump (if used) is functioning correctly.
- Fuel Leaks: Immediately address any fuel leaks. Re-tighten all fittings, inspect O-rings for damage, and replace any compromised components. Do not operate the vehicle with a fuel leak.
- Unusual Noises: Investigate any unusual noises (e.g., buzzing, grinding) coming from the surge tank area. This could indicate a loose fuel pump, improper mounting, or a failing pump.
- Engine Performance Issues: If engine performance issues persist, consult a professional mechanic to diagnose the fuel system and other related components.
9. User Tips
- Professional Installation: For optimal performance and safety, it is highly recommended to have this fuel surge tank installed by a qualified professional.
- Verify Dimensions: Before purchasing or installing, carefully check the product dimensions provided in the specifications section and diagram to ensure compatibility with your vehicle and intended mounting location.
- Acquire Fittings Separately: Remember that -6AN O-ring boss to -6AN inlet/outlet fittings are not included and must be acquired separately. You will need three of these.
10. Warranty and Support
For product support, technical assistance, or inquiries regarding warranty terms, please contact the seller, gogoro Store, directly through the platform where the purchase was made. Please have your order details and product model number (YH-HCG-02BK) available when contacting support.