UKGF K-808APR

Contents

UKGF K-808APR 12V 8-inch Ultra-Thin Active Car Subwoofer User Manual

Model: K-808APR

1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Professional installation is required. Securely fasten the speakers to designated vehicle mounting points (such as door panels or trunks) to prevent slipping, loosening, or damage from bumps and sudden braking, avoiding noise generation.
  • During installation, avoid key components such as vehicle airbags, steering systems, and fuel lines to prevent obstructing airbag deployment and affecting vehicle safety performance.
  • The speaker wiring should be matched with the power of the car amplifier and the host to avoid burning the speaker due to high power, or affecting the sound effect due to low power, and causing component overheating.
  • Connect the wires strictly according to the markings (positive "+", negative "-"). Reversing the positive and negative poles can cause distortion of sound effects, abnormal diaphragm vibration, and long-term use may damage the speaker.
  • Ensure that the terminals are firmly connected during wiring. Wrap the interface with insulating tape to avoid virtual connections and short circuits. The wiring harness should be organized in a standardized manner and kept away from high-temperature components of the vehicle (such as exhaust pipes) to prevent aging and damage to the wiring harness.
  • When the vehicle is parked for a long time, turn off the power of the car audio system to avoid the speaker being in standby mode for a long time. At the same time, take protective measures to prevent dust and debris from entering.

2. Setup and Installation

2.1 Before First Use

  1. Accessory Inspection: Confirm that the speaker host, installation screws, wiring terminals, waterproof rings (if necessary), and other accessories are complete and undamaged.
  2. Installation Position: Select dedicated installation positions such as vehicle door panels or the trunk to ensure space adaptation, ventilation, and dryness. Avoid key components such as airbags and fuel lines. The ultra-thin design allows for installation under a passenger seat.
  3. Tool Preparation: Gather screwdrivers, wire strippers, cable ties, electrical tape, and other necessary tools.

2.2 Installation Steps

  1. Disconnect Power Supply: Turn off the power supply of the onboard host and amplifier. Disconnect the negative terminal of the vehicle battery to prevent short circuits during wiring.
  2. Fixed Speaker Installation: Place the speaker smoothly into the chosen installation position. Firmly fix it with matching screws. Install a waterproof ring (if necessary) to ensure it does not loosen or shake when the vehicle is bumpy.
  3. Wiring Operation: Connect the speaker to the host/amplifier according to the positive "+" and negative "-" markings of the speaker. Ensure that the positive and negative poles are consistent and the terminals are firm. Wrap the interface with insulating tape, organize the wiring harness in a standardized manner, and keep it away from high-temperature components.
  4. Recovery and Debugging: After checking that the wiring is correct, connect the negative terminal of the battery. Turn on the host and amplifier, adjust the volume and sound effects, and confirm that the speaker is working properly and without noise.
Wiring diagram and function introduction for the K-808APR subwoofer

Figure 1: Subwoofer Control Panel and Wiring Diagram

  • VOLUME: Adjusts the output volume.
  • REMOTE: Remote control input.
  • HI-INPUT: High-level input.
  • INPUT: Audio input.
  • REM +12V GND-: Power supply connections (Remote, +12V, Ground).
  • BASS/FULL: Bass surround/full range audio toggle.
  • 0dB/6dB: Low frequency pressurization switch.
  • 40Hz/200Hz: Low frequency adjustment.
  • POWER: Power indicator.
  • F-806: Model identifier.
UKGF K-808APR subwoofer installed under a car passenger seat

Figure 2: Example of Subwoofer Installation Under a Car Seat

3. Operating Instructions

  • Power On and Off: Synchronize power on and off with the onboard host and amplifier. No separate operation is needed. It is recommended to turn off the host before turning off the engine to avoid battery depletion.
  • Sound Effect Adjustment: Adjust the volume, high, and low frequencies through the car host or amplifier. Avoid prolonged high volume and high power output to prevent speaker overload damage and to ensure driving safety.
  • Daily Use: Avoid touching the speaker diaphragm with sharp objects. Prevent foreign objects from entering the cavity to avoid sound quality distortion or component damage.

4. Maintenance

  • Storage: When not in use, turn off the device and store it in a dry place, away from children.
  • Regular Checks: Regularly check whether the wiring terminals are secure, whether the wiring harness is damaged, whether there is any abnormal noise from the speaker, and whether the diaphragm is damaged. Any abnormalities should be dealt with in a timely manner.

5. Troubleshooting

  • No Sound or Distorted Audio: Check all wiring connections, ensuring positive and negative terminals are correctly matched and firmly connected. Verify the power supply to the subwoofer and amplifier.
  • Abnormal Diaphragm Vibration: This can be caused by incorrect positive/negative wiring. Ensure wiring polarity is correct as per the diagram.
  • Speaker Overheating or Burning: Ensure the speaker's power rating is compatible with your car amplifier and host unit. Mismatched power can lead to damage.
  • Intermittent Sound: Check for loose wiring connections or damaged wiring harnesses. Ensure all connections are secure and insulated.
  • Unwanted Noise: Ensure the wiring harness is routed away from high-temperature components and other electrical interference sources in the vehicle.

6. Specifications

Product dimensions and specifications table for the K-808APR subwoofer

Figure 3: Product Dimensions and Key Specifications

Technical Specifications
FeatureSpecification
Model NameK-808APR
Brand NameUKGF
Item TypeSpeakers
Voltage12 V
Speaker Size8 inch
Product Dimensions (L*W*H)352mm * 255mm * 75mm
MaterialDensity Boards (Felt wooden body)
Audio SensitivityMore than 90dB
Signal To Noise Ratio (SNR)More than 90dB
Impedance4 Ohms
Frequency Range20Hz-25kHz
Peak Power600W
RMS Power80W
Total Harmonic Distortion (THD)<0.04%
Bass Boost0 to +12dB
CertificationCE
OriginMainland China
Package Weight4.313 kg
Package Dimensions40cm x 32cm x 13cm

7. Warranty and Support

7.1 Manufacturer Information

  • Manufacturer: Guangzhou Kuer Automotive Supplies Co., Ltd.
  • Address: Yiyou (International) Auto Parts Commodities Trading Center, No. 155 HengFu Road
  • Email: 1033789983@qq.com

7.2 EU Authorized Representative

  • Company Name: E-CrossStu GmbH
  • Address: Felix-Dahn-Str 4
  • Email: E-CrossStu@web.de

7.3 Importer Information

  • Importer Name: Guangzhou Kuer Automotive Supplies Co., Ltd.
  • Address: Yiyou (International) Auto Parts Commodities Trading Center, No. 155 HengFu Road

7.4 Certifications

This product holds CE certification, confirming its compliance with European safety, health, and environmental protection requirements. The Certificate Number is KOT-2021063828C.

A detailed user manual (PDF) is available for download from the seller's website for comprehensive information.

8. User Tips

  • Verify Dimensions: Before purchasing and installing, carefully check the product dimensions (352mm x 255mm x 75mm) to ensure it fits your intended installation location, especially if planning to place it under a car seat.
  • Professional Installation Recommended: For optimal performance and safety, consider professional installation, particularly for complex wiring or integration with existing car audio systems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.