1. Introduction
The GGBEE SC-007 Submersible LED Light is a versatile, waterproof lighting solution designed to enhance various environments. Featuring RGB color changing capabilities, multiple dynamic modes, and remote control operation, it is ideal for use in swimming pools, fish tanks, fountains, vases, and as decorative accent lighting for parties, events, and home decor.

2. Package Contents
Please check the package for the following items:
- GGBEE SC-007 Submersible LED Light(s)
- Infrared Remote Control (battery not included)
3. Specifications

| Feature | Detail |
|---|---|
| Model | SC-007 |
| Light Source | 3 pieces 5050 RGB LED bulbs |
| Remote Control Method | Infrared remote control |
| Voltage | 6 V |
| Material Quality | ABS transparent |
| Waterproof Grade | IP68 (Certified, fully submersible) |
| Certifications | CE, RoHS, FCC |
| Light Battery | CR2032 (pre-installed, with insulation sheet) |
| Remote Battery | CR2025 (not included) |
| Working Hours | 7~20 hours (depending on mode/brightness) |
| Dimensions | 30.5 mm (diameter) x 23 mm (height) |
| Installation Method | Self-contained |
| Application | Swimming pool, aquarium, vase, hot tub, party, lantern, wedding decor |
4. Setup and Installation
4.1. Light Preparation
- Unscrew the Cover: Gently twist the top cover of the LED light counter-clockwise to open the battery compartment.
- Remove Insulation Sheet: Locate the CR2032 battery inside. Remove the small plastic insulation sheet positioned next to the battery. This activates the battery.
- Secure the Cover: Carefully align the cover and screw it back on clockwise. Ensure it is tightened firmly to maintain the IP68 waterproof seal. Do not overtighten.
4.2. Remote Control Battery Installation
- The remote control requires one CR2025 battery (not included).
- Locate the battery tray on the side or back of the remote control.
- Pull out the tray, insert the CR2025 battery with the positive (+) side facing up, and slide the tray back into place until it clicks.
4.3. Placement
Once prepared, simply place the light in your desired location. It is designed to be self-contained and can be dropped directly into water (up to 1.5m depth) or placed in dry decorative settings.

5. Operating Instructions
The GGBEE SC-007 LED light is operated using the included 24-key infrared remote control. Ensure the remote has a clear line of sight to the light for optimal performance (up to 10m range).

5.1. Remote Control Functions
- Turn ON/OFF: Press the ON button to turn the light on, and OFF to turn it off.
- Brightness Adjustment: Use the Brightness Up (
) and Brightness Down (
) buttons to adjust the intensity of the light. - Static Colors: Select from 16 different static colors using the color palette buttons (e.g., Red, Green, Blue, White, Yellow, Purple, Cyan, etc.).
- RGBW Buttons: Directly select Red (R), Green (G), Blue (B), or White (W) colors.
- Dynamic Modes: Choose from 4 pre-programmed dynamic lighting effects:
- FLASH: Rapidly cycles through colors.
- STROBE: Flashes a single color on and off.
- FADE: Smoothly transitions between colors.
- SMOOTH: A slower, more gradual transition between colors.
6. Maintenance
6.1. Battery Replacement
For the LED Light (CR2032):
- When the light appears dim or unresponsive, it's time to replace the battery.
- Unscrew the top cover counter-clockwise.
- Carefully remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Screw the cover back on firmly, ensuring a tight seal to maintain waterproofing.
For the Remote Control (CR2025):
- If the remote control is unresponsive, replace its CR2025 battery.
- Pull out the battery tray, replace the old battery with a new CR2025 (positive side up), and reinsert the tray.
6.2. Cleaning
Wipe the light with a soft, damp cloth as needed. Do not use abrasive cleaners or solvents, as they may damage the transparent ABS material.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Battery insulation sheet not removed. 2. Dead battery. 3. Remote control battery dead or not inserted correctly. | 1. Ensure the insulation sheet is removed from the light's battery compartment. 2. Replace the CR2032 battery in the light. 3. Replace the CR2025 battery in the remote control, ensuring correct polarity. |
| Light is dim or flickers | Low battery. | Replace the CR2032 battery in the light. |
| Remote control not working | 1. Remote battery dead or incorrectly inserted. 2. Obstruction between remote and light. 3. Remote too far from light. | 1. Replace the CR2025 battery in the remote, check polarity. 2. Ensure a clear line of sight. 3. Move closer to the light (within 10m). |
| Water inside the light / Light stops working after water exposure | Cover not securely tightened. | Always ensure the top cover is screwed on very firmly and tightly after battery installation or replacement. A loose cover will compromise the waterproof seal. If water has entered, dry the unit thoroughly and replace the battery. Ensure a proper seal for future use. |
8. User Tips
- Ensure Secure Sealing: To maintain the IP68 waterproof rating, always double-check that the battery compartment cover is screwed on very tightly and securely after any battery changes. This is crucial for preventing water ingress.
- Synchronized Effects: Use multiple lights with a single remote control for synchronized color changes and dynamic effects across your display.
- Battery Life: To maximize battery life, turn off the lights when not in use. Brighter settings and dynamic modes consume more power.
- Remote Range: For best remote control performance, ensure there are no major obstructions between the remote and the lights, and operate within the 10-meter range.
9. Warranty and Support
For any issues or inquiries not covered in this manual, please contact your retailer or the manufacturer's customer support for assistance.