1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your 36V 48V 52V 40A Brushless Controller, GD02 Meter LCD Display, and 130X Throttle Kit. This kit is designed as a power conversion accessory for mountain bikes, electric scooters, and e-bikes, featuring a 40A three-mode 15-tube sine wave controller and a GD02 color screen LCD instrument with a 130X throttle set. The controller is a sine wave three-mode type, compatible with both Hall and non-Hall brushless motors, and includes a self-learning function.
2. Safety & Warnings
Warning!
- This product is intended for adult use only.
- Keep the product out of reach of children and pets to prevent accidental injury or ingestion.
- Always verify that the installation is correct before use.
- If you observe any abnormal noise or equipment errors after installation, immediately stop using the device.
- Adhere to all instructions for proper use. Misuse can lead to harm or damage.
- Store the product in a dry and shady location, away from high temperatures, excessive humidity, and direct sunlight.
3. Package Contents
The package includes the following components:
- 1 x Controller
- 1 x LCD Display (GD02 instrument)
- 1 x Throttle (130X)
Note: Only the listed items are included. Other products shown in promotional images are not part of this package.
4. Specifications
Controller Specifications
| Type | Three-mode 40A full-normal controller |
| Rated Voltage | 36V-48V |
| Current | 40 ± 1A |
| Field Effect Transistor | 15 tubes |
| Brake Input | Low level |
| Communication Protocol | No. 2 communication protocol |
| Dimensions (L*W*H) | 185mm * 41mm * 82mm |
| Weight | 546g |
| Material | Metal + Plastic (All aluminum housing for heat dissipation) |
| Color | Black |
GD02 Instrument (LCD Display) Specifications
| Product Model | GD02 instrument |
| Product Size | Height 82mm, Length 48mm |
| Core Wire Specification | 5pin + 2pin |
| Operating Temperature | -20°C to 60°C |
| Voltage | 24V-60V |
| Connector | Ordinary connector |

Image: Controller dimensions and specifications.

Image: GD02 color screen instrument details.
5. Setup
Before beginning installation, carefully inspect all components for any signs of damage. Ensure all connections are secure and correctly aligned according to the wiring diagram. The controller is designed for 36V, 48V, or 52V systems and is suitable for 1500W/2000W motors.
Wiring Overview
The kit includes a controller with various wire connectors, a GD02 LCD display, and a 130X throttle. Connect the components as follows:
- Connect the controller to the motor, battery, display, and throttle using the appropriate connectors.
- The GD02 instrument uses a 5pin+2pin core wire specification.
- The brake input is low level.

Image: Main components of the kit, showing the controller with its various wired connections, the GD02 display, and the 130X throttle.
For detailed wiring instructions and diagrams, please refer to the comprehensive user manual PDF linked in the 'Additional Resources' section.
6. Operating Instructions
Once all components are correctly installed and secured, power on your electric scooter or e-bike. The GD02 color screen LCD instrument will display operational data.
GD02 Display Functions
The GD02 display provides a large screen for easy readability and diverse functions. It typically shows speed (mph/kmh), battery level, error codes, and other relevant information. Use the buttons on the display to navigate through different modes and settings.
Image: GD02 color screen instrument in operation, displaying speed, battery status, and other metrics.
Throttle Operation
The 130X throttle allows for speed control. Gently apply the throttle to accelerate and release to decelerate. Ensure smooth operation to maintain control of your vehicle.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your controller kit.
- Storage: When not in use, store the product in a dry and shady place, away from direct sunlight, high temperatures, and excessive humidity.
- Cleaning: Keep the components, especially the display, clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
- Inspection: Periodically check all wiring and connectors for signs of wear, corrosion, or damage. Ensure all connections remain secure.
- Controller Housing: The controller features an all-aluminum housing designed for heat dissipation. Ensure it remains unobstructed to allow for proper cooling during operation.

Image: All-aluminum housing of the controller, designed for efficient heat dissipation.
8. Troubleshooting
If you encounter issues with your controller kit, consider the following basic troubleshooting steps:
- Abnormal Noise or Equipment Error: If the device produces abnormal noise or displays an error code, immediately power off the system and inspect all connections. Refer to the detailed PDF manual for specific error code interpretations and solutions.
- No Power: Check the battery connection and ensure it is fully charged. Verify all power cables are securely connected to the controller and display.
- Display Not Working: Ensure the display's core wire (5pin+2pin) is properly connected to the controller. Check for any visible damage to the display unit or its cable.
- Throttle Unresponsive: Verify the throttle's connection to the controller. Ensure there are no obstructions preventing the throttle from moving freely.
For more complex issues or if basic troubleshooting does not resolve the problem, it is recommended to consult a qualified technician or refer to the comprehensive user manual PDF.
9. User Tips
No specific user tips are available from customer reviews or Q&A for this product at this time. Always ensure proper installation and follow safety guidelines for optimal performance and longevity of the kit.
10. Warranty & Support
Manufacturer Information
Manufacturer: Heze jierui electronic technology co., ltd
Address: Dalong Net A208 Code: 274000, Tianhua Logistics Park, Changcheng Road, Mudan District, Heze City, Shandong Province
Contact: hkd87syksdd@163.com / +86 18026526147
EU Authorized Representative
Representative: Prolinx GmbH
Address: Duesseldorf Brehmstr.56 40239
Contact: eu@eulinx.eu / +49 21131054698
For support inquiries, please contact the manufacturer or the EU authorized representative directly.

Image: CE marking.
11. Additional Resources
A comprehensive user manual in PDF format is available for detailed instructions, wiring diagrams, and advanced settings.