IANLOV IL-G0159

Contents

Nordic LED Wall Light Instruction Manual

Model: IL-G0159

1. Introduction

Thank you for purchasing the IANLOV Nordic LED Wall Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Nordic LED Wall Light in a modern living room
Image: Nordic LED Wall Light in a modern living room setting.

2. Safety Information

  • Always disconnect the power supply before installation, maintenance, or cleaning.
  • Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
  • Do not pull the wires during installation.
  • Ensure all screws are securely tightened and wires are properly connected.
  • This product is designed for indoor use only.
  • Do not attempt to modify the light fixture.

3. Package Contents

Please check the package to ensure all components are present and undamaged:

  • LED Wall Light Fixture (Model IL-G0159)
  • Mounting Hardware (screws, wall anchors)
  • Wire Connectors
  • Installation Manual (this document)

4. Tools Needed for Installation

  • Drill
  • Drill bits (appropriate for wall material)
  • Hammer
  • Screwdriver (Phillips head recommended)
  • Wire strippers
  • Voltage tester (recommended for safety)

5. Installation Instructions

Follow these steps carefully for proper installation:

  1. Prepare for Installation: Ensure the power supply to the installation area is turned off at the circuit breaker.
  2. Mark Drilling Points: Hold the lamp base against the wall at the desired installation location and mark the drilling points for the wall fixing screws.
  3. Drill Holes: Use a drill to create holes at the marked points. Insert wall anchors if necessary for your wall type.
  4. Connect Wires:
    • Connect the red wire from the fixture to the live wire (usually black or red) from your electrical supply (positive '+').
    • Connect the blue wire from the fixture to the neutral wire (usually white or blue) from your electrical supply (negative '-').
    • Use appropriate wire connectors to secure the connections.
  5. Mount the Lamp: Align the lamp base with the drilled holes and fix the lamp securely to the wall using the provided screws.
  6. Test: Before fully securing, it is recommended to test the light. Restore power and check if the light functions correctly. If so, disconnect power again and complete securing the fixture.
  7. Final Securement: Ensure all connections are tight and the fixture is firmly mounted. Restore power.
Installation diagram showing drilling, wiring, and mounting steps for the wall light
Diagram: Detailed steps for drilling holes, connecting wires, and fixing the lamp to the wall.

6. Operating Instructions

The Nordic LED Wall Light is operated via a standard wall switch. This fixture supports multiple color temperatures (Warm White, Nature White, Cool White) which can be cycled by toggling the wall switch ON/OFF in quick succession.

  • Turn On/Off: Use your existing wall switch to turn the light on or off.
  • Change Color Temperature: To cycle through the available color temperatures (Warm White, Nature White, Cool White), quickly turn the wall switch OFF and then ON again. Repeat until your desired color temperature is displayed.
Comparison of black LED wall light in 'turn on' and 'turn off' states
Image: Black LED wall light demonstrating 'on' and 'off' states.
Comparison of warm white, nature white, and cold white color temperatures
Image: Visual representation of Warm White (3000K), Nature White (4500K), and Cold White (6000K) light outputs.
Video: Demonstration of the LED wall light, including turning it on and cycling through different color temperatures.

7. Maintenance

  • Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • LED Drive: The LED drive is replaceable by a qualified technician if needed. Do not attempt to replace it yourself unless you are qualified.
  • LED Chips: The LED chips are integrated and designed for long-term use. They are not user-replaceable.

8. Troubleshooting

  • Light does not turn on:
    • Check if the power supply is connected and turned on at the circuit breaker.
    • Verify that the red and blue wires are correctly connected to the live and neutral wires, respectively.
    • Ensure all wire connections are secure.
  • Light flickers:
    • Check for loose wire connections.
    • Ensure the voltage supply is stable and within the specified range (AC 110V-220V).
  • Cannot change color temperature:
    • Ensure you are toggling the wall switch OFF and ON quickly enough to trigger the color change function.

Important: For any complex electrical issues, please consult a qualified electrician.

9. Specifications

Attribute Specification
Brand NameIANLOV
Model NumberIL-G0159
Item TypeWall Lamps
MaterialIron (Body Material), Acrylic (Shade Type)
Light SourceLED bulbs (Bulbs Included: Yes)
Luminous Flux249-2000 lumens
VoltageAC 110V-220V
Power SourceAC
Wattage (Length dependent)60CM: 12W, 80CM: 18W, 100CM: 24W
Color TemperatureWarm White (2700-3500K), Nature White (3500-5500K), Cool White (5500-7000K)
Color OptionsBlack (Matte Black), Gold (Brass)
Installation TypeWall Mounted, self-contained
Lighting Area5-10 square meters
ApplicationKitchen, Dining Room, Bed Room, Foyer, Study, Bathroom
StyleModern Style
TechnicsPlated
Shade DirectionUp & Down
Switch TypeKnob switch (functions as a standard wall switch for cycling CCT)
Is DimmableNo
Is Smart DeviceNo
CertificationCCC, CE
Package DimensionsLength: 105cm, Width: 8cm, Height: 8cm
Package Weight1.5 kg
Dimensions of the 60CM black LED wall light: 60cm length, 8cm width
Image: Dimensions for the 60CM Matte Black model (60cm length, 8cm width).
Dimensions of the 80CM and 100CM brass LED wall lights: 80cm and 100cm lengths, 8cm width, 2cm thickness
Image: Dimensions for 80CM and 100CM Brass models (80cm/100cm length, 8cm width, 2cm thickness).

10. Warranty and Support

This IANLOV LED Wall Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the IANLOV Official Store directly.

11. User Tips

  • Color Temperature Cycling: If you find the light is not changing color temperature, try a quicker ON/OFF toggle of your wall switch. Some users find a rapid flick of the switch works best.
  • Aesthetic Placement: Consider installing these lights in pairs or multiples to create a balanced and modern aesthetic in larger rooms or hallways.

12. Frequently Asked Questions (FAQ)

Q: Can the light change color temperature by switching it on and off?
A: Yes, the light fixture is designed to cycle through different color temperatures (Warm White, Nature White, Cool White) by quickly toggling your standard wall switch off and on.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.