Laiwen L1-BK-PAIR

Contents

Laiwen Invisible Rechargeable Hearing Aid

Model: L1-BK-PAIR

User Guide

1. Introduction

Thank you for choosing the Laiwen Sound Amplifier. This booklet provides essential information for the proper use and maintenance of your device. The Sound Amplifier has undergone strict quality inspection to ensure optimal performance.

This manual will introduce basic use methods and solutions for common problems to help you use your Sound Amplifier effectively. Please read it carefully.

For a comprehensive guide, you may also refer to the official PDF user manual: View Full User Manual (PDF)

2. Intended Use

The Sound Amplifier is an auxiliary instrument designed to compensate for a patient's hearing loss. It is suitable for individuals aged 18 or older.

3. Safety Information

  • Age Restriction: If you are younger than 18, do not use this device. Consult an ear-nose-throat doctor (ENT) for specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
  • Battery Safety: Do not throw the Sound Amplifier into a fire as the battery may explode. The device contains a NI-MH battery. Do not dispose of it with household waste; separate and recycle responsibly.
  • Small Parts: Keep small parts that can be swallowed out of children's reach.
  • Avoid Extreme Conditions: Do not put the Sound Amplifier in a microwave oven or fire. Do not expose to extreme temperatures or prolonged sunlight.
  • Ingestion Warning: Do not put the Sound Amplifier in the mouth. If accidentally swallowed, consult a doctor immediately as it can be life-threatening.
  • Personal Use: The specific Sound Amplifier must only be used by the intended person and not by others.
  • Medical Guidance: Users who have undergone surgery should use the Sound Amplifier under the guidance of a professional doctor.
  • Special Users: Children cannot wear the Sound Amplifier without adult guidance. Mental patients should consult a physician before wearing.
  • Hazardous Environments: Do not use the Sound Amplifier in explosive or oxygen-enriched atmospheres.
  • Battery Leakage: Remove the Sound Amplifier immediately if battery leakage occurs.
  • Infants: Not intended for use by infants under 36 months.
  • Medical Imaging: Do not wear your Sound Amplifier during X-ray, MR scans, CT scans, short-wave diathermy, or similar radiation treatment.
  • Regular Checks: The Sound Amplifier should be sent for maintenance and inspection regularly.

4. Structural Characteristics

The Sound Amplifier is designed to conform to the structure of the human ear canal, making it invisible and comfortable to wear. It is suitable for both quiet and noisy environments.

Diagram showing the structure and function of the hearing device, including switch, microphone port, pull line, volume adjustment knob, eardome, and earwax guard.
Figure 1: Hearing Device Structure and Function

Components:

  1. Earplug
  2. Microphone
  3. Pull Wire
  4. Power Switch (OFF/ON)
  5. VC (Volume Control)
  6. Shell

5. Setup

5.1. Unpacking and Check

  • Check that all parts are in accordance with the accessory list.
  • Verify that the model marked on the warranty card is consistent with the Sound Amplifier model and serial number.

5.2. Identify Left and Right Ear Sound Amplifier

The Sound Amplifier is universal for both the left and right ear.

5.3. Charging

Image showing the rechargeable hearing aids and backup charge case with a USB-C cable, highlighting 20 hours working time, 5 times backup power, 2 hours full charge for aids and case, and 2 hours backup charge for aids.
Figure 2: Charging Case and Battery Life Overview

Connect the Micro USB cable to a standard-compliant power adapter and the charging case. Place the Sound Amplifier(s) into the charging base.

  • When placed in the charging base, the blue indicator will blink twice initially.
  • The indicator lights blue during charging and turns off when fully charged.
  • If the Sound Amplifier is not inserted, the indicator will not light.
  • First Use: Recommended to charge for no less than 6 hours for the first time.

Charging Status Indicators:

Type of Case Case in Charge Case is Fully Charged Sound Amplifier in Charge Sound Amplifier Fully Charged Rechargeable Case's Battery Low
Single charging case Lights Blue Lights OFF Lights Blue Lights OFF Blue light blink
Binaural charging case NA NA Lights Blue Lights OFF NA

5.4. Power On/Off

  • Power On: Flip the power switch to ON.
  • Power Off: Flip the power switch to OFF.

5.5. Replacing Earplug

Disassembly: Pinch the earplug with your hand to separate the tube from the connector.

Assembly: Select the appropriate size of earplug. Hold the earplug and insert it into the connector correctly. Ensure the bottom of the earplug reaches the bottom of the connector and does not drop off when gently pulled.

Tips for Earplug Size:

  • It is recommended to try an M size earplug first. If the earplug is too small, the Sound Amplifier may whistle when worn. Choose a bigger size if whistling occurs.
  • If the earplug is too big, you may not be able to wear it comfortably. Choose a smaller size.

5.6. Wearing the Sound Amplifier

Hold your Sound Amplifier by your thumb and forefinger with the pull wire facing downwards.

Use the tip of your forefinger to gently push the Sound Amplifier into your ear until it feels comfortable in your canal. Use your other hand to pull the outer ear backwards and upwards to ease insertion. Move your forefinger up and down gently, and open/close your mouth several times to check for a secure and comfortable fit.

5.7. Adaptation Plan for New Users

Video: Product overview and adaptation steps for new users.

As a new user, you may hear sounds you haven't heard for a long time, which can feel uncomfortable initially. It takes time for your brain to adapt to these new sounds. The acclimatization period is typically about 4 to 8 weeks.

  1. First Week: Use 1-2 hours per day in a quiet indoor environment to familiarize yourself with and distinguish various sounds.
  2. Second Week: Use 3-4 hours per day. Try quiet outdoor places.
  3. Third Week: Use more time per day. Try public places.
  4. Fourth Week: Use full day. Try anywhere you want.

6. Operating Instructions

6.1. Volume Control

The left and right ear Sound Amplifiers have the same volume control mechanism.

  • Clockwise rotation: Volume gradually increases.
  • Counterclockwise rotation: Volume gradually decreases.

If the amplified sound is insufficient even at maximum volume, the power may be low. Please charge the device.

6.2. Removing the Sound Amplifier

Pinch the pull wire with your thumb and forefinger and gently pull it out of the ear canal.

Note:

  • Open and close your mouth while removing the Sound Amplifier.
  • Use your other hand to gently pull the ear back, which makes removal easier.
  • It is best to wear and remove the Sound Amplifier over a soft surface, such as a sofa or bed, to prevent damage if dropped.

7. Maintenance

7.1. Cleaning the Sound Amplifier

  • Clean your Sound Amplifier with a dry, soft cloth.
  • Use a brush to clean earwax from the Sound Amplifier sound hole.
  • Clean the Sound Amplifier on a soft desk or table to prevent damage.
  • Never use any liquid, including water, to clean it, as this may cause permanent damage to the circuitry.

7.2. Replacing the Wax Guard

Wax guards need to be purchased separately. Consult your fitting center for the Sound Amplifier or follow the instructions on the Wax Guard package for replacement.

7.3. Vibration Prevention

Store the Sound Amplifier in its charging case when not in use.

7.4. Moisture Prevention

Place the Sound Amplifier into a dry box every night before going to sleep to extend its lifespan. (Note: Dryers are sold separately).

7.5. Water Prevention

Keep the Sound Amplifier away from water. Remove it before swimming, showering, or washing your head or face. If the Sound Amplifier accidentally falls into water, do not use it. Use a soft, clean cotton cloth to dry it and place it in a ventilated, dry environment. If any failure occurs, contact the hearing center or customer service.

7.6. High Temperature Prevention

Do not expose the Sound Amplifier to extreme temperatures or prolonged exposure to direct sunlight.

7.7. Dropping Prevention

Do not drop your Sound Amplifier or knock it against hard surfaces.

7.8. EMC (Electromagnetic Compatibility)

According to IEC 60118-13, remove your Sound Amplifier before getting close to radio and telecommunication equipment, as this could damage your hearing or the Sound Amplifier.

8. Troubleshooting

If you encounter any issues, refer to the table below. If the problem persists after attempting these solutions, please contact the hearing center where you acquired the Sound Amplifier or customer service. Do not open or repair the device yourself.

Failure Cause Solution
No sound Sound Amplifier not worn correctly Correctly wear the device
The volume is too loud Turn down the volume
Low battery Charge the Sound Amplifier
Dirt blocks the earplug or tube Clean earwax or contact with an audiologist
Small voice Low battery Charge the Sound Amplifier
Not clear Hearing loss change Consult the audiologist
Distortion Sound Amplifier is damped Dry it with a dry box or contact with an audiologist
Dirt blocks the sound tube Clean the sound tube or contact with an audiologist
Can't adjust the volume Volume has been placed on maximum or minimum level Rotate the volume knob in the opposite direction
Dirt blocks the sound tube or earplug Clean or contact with an audiologist
High power consumption Sound Amplifier is still on when not in use Place it in the charging case when not in use
Sound Amplifier is damped Dry it with a dry box or contact with an audiologist
Local leakage Send it to a local service center for maintenance
Intermittent sound Low battery Charge the Sound Amplifier

9. Specifications

9.1. Operating Conditions

  • Temperature: 0°C ~ +40°C
  • Humidity: 0%RH ~ 80%RH

9.2. Storage and Transportation Conditions

  • Temperature: -20°C ~ +50°C
  • Humidity: 0%RH ~ 93%RH

9.3. Electrical and Atmospheric Specifications

  • Rated Voltage: DC1.2V
  • Normal Atmospheric Pressure Range: 86Kpa ~ 106Kpa

9.4. Technical Performance (IEC 60118-7 2CC Coupler)

Technical Specification Typical Value
MAX OSPL90 (dB SPL) 108.7
HFA OSPL90 (dB SPL) 106.4
Peak Gain (dB) 30.0
HFA FOG (dB) 25.6
Frequency Range F1≤200Hz; F2≥6500Hz
THD at 500Hz 2.3%
THD at 800Hz 2.9%
THD at 1600Hz 1.9%
Eq. Input Noise Level (dB) 24.8
Battery Current Drain (mA) 1.2
Attack Time (ms) NA
Release Time (ms) NA

10. Warranty and Support

10.1. Warranty Coverage

  • Free Warranty: For all devices, failures caused by non-human factors will receive free warranty from the date of purchase.
  • Warranty Period: Free repairs are provided within the warranty time for non-human damage. Please check the warranty period on your warranty card.

10.2. Non-Free Warranty Coverage

The warranty does not cover:

  • Damage caused by incorrect use or improper operation.
  • Damage caused by disassembly, assembly of parts, or other human-induced damage.
  • Damage caused by irresistible reasons (e.g., floods, fires, earthquakes).
  • Changing the Sound Amplifier model or serial number on the warranty card without authorization.
  • Absence of a warranty card.

10.3. Use Period

The normal working hours of the device are 5 years. Equipment must be stored and used as required. Its intended function may be affected after the specified usage time if performance index requirements are not met.

11. User Tips

  • Gradual Adaptation: New users should follow the adaptation plan to gradually get used to the new sounds. This can take several weeks.
  • Proper Fit: Ensure the earplug fits snugly to prevent whistling. Experiment with different sizes if needed.
  • Regular Cleaning: Keep the device clean from earwax and moisture to maintain performance and extend lifespan.
  • Safe Handling: Always handle the hearing aid over a soft surface to avoid damage from accidental drops.

12. Symbol Information

The following symbols may appear on your product or in its literature:

Symbol Description
User Guide Must Be Read icon Symbol for "User Guide must be read"
i Symbol for "Consult instructions for use"
Manufacturer icon Symbol for "Manufacturer"
! Symbol for "Caution"
Fragile, Handle With Care icon Symbol for "Fragile, handle with care"
Keep Dry icon Symbol for "Keep dry"
Date of Manufacture icon Symbol for "Date of manufacture"
SN Symbol for "Serial number"
Use-by Date icon Symbol for "Use-by date"
Type B Applied Part icon Type B Applied Part
Do Not Dispose with Household Waste icon This marking indicates that the product should not be disposed of with other household wastes at the end of its working life. Separate and recycle responsibly.
IP22 IP22: Protected against solid foreign objects of 12.5 mm and greater. Protected against vertically falling water drops when enclosure tilted up to 15°.
Harmful Substances Meet Limited Requirements icon The harmful substances in the product meet the limited requirements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.