1. Introduction
The TEYUN NA4 is a compact and versatile 4-channel audio mixing console designed for a wide range of applications, including broadcasting, podcasting, karaoke, live performances, and home recording. It features 24 built-in DSP effects, USB connectivity for PC playback and recording, Bluetooth for wireless audio streaming, and 48V phantom power for condenser microphones. This manual provides detailed instructions for setting up, operating, and maintaining your NA4 mixer.

Figure 1: TEYUN NA4 4-Channel Audio Mixer
2. Safety Information
- Electrical Safety: Do not expose this device to rain or moisture. Do not open the casing; there are no user-serviceable parts inside. Use only the specified power adapter provided with the unit.
- Phantom Power Warning: When using dynamic microphones, ensure the +48V Phantom Power is turned OFF. Activating phantom power with dynamic microphones can cause damage to the microphone.
- Ventilation: Ensure adequate ventilation around the mixer to prevent overheating. Do not block any ventilation openings.
- Placement: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
3. Package Contents
Please check the box for the following items:
- 1 x TEYUN NA4 Audio Mixer
- 1 x USB Cable (Type-A to Type-B, 1 meter)
- 1 x Power Adapter (EU Plug)

Figure 2: Included items: Audio Mixer, USB Cable, Power Adapter
4. Product Overview
4.1 Front Panel Controls

Figure 3: Front Panel Layout of the NA4 Mixer
- MIC/LINE Inputs (Channels 1 & 2): XLR/TRS combo jacks for microphones or line-level instruments. Each channel has:
- GAIN Knob: Adjusts input sensitivity.
- HIGH/LOW EQ Knobs: Adjusts treble and bass frequencies.
- FX/PC REC Button: Engages the channel for effects processing or PC recording.
- PEAK Indicator: Lights up when the input signal is too high (clipping).
- Channel Volume Knob: Controls the individual volume level of the channel.
- LINE IN/3-4 (Stereo Channel): RCA inputs for stereo line-level devices. Includes GAIN, HIGH/LOW EQ, LINE IN/3-4 button, and Channel Volume knob.
- Main Output Section:
- REC (RCA): Stereo RCA outputs for recording.
- MAIN OUT (TRS L/R): Balanced 1/4-inch TRS outputs for connecting to amplifiers or powered speakers.
- MAIN Volume Knob: Controls the overall output volume.
- MAIN PH Volume Knob: Controls the volume of the headphone output.
- Headphone Jack: 3.5mm stereo output for monitoring.
- Digital Section:
- Digital Display: Shows current mode (USB, PC, BLUE) and DSP effect number.
- UP/DOWN Buttons: Selects DSP effects.
- FX/PC REC Knob: Adjusts the level of effects sent to the main mix.
- MUTE FX Button: Mutes all DSP effects.
- Media Player Controls: Play/Pause, Skip Forward/Backward, MODE button (switches between USB, PC, Bluetooth).
- PC/BT/MP3 Volume Knob: Adjusts volume for PC audio, Bluetooth audio, and USB MP3 playback.
- USB Port: For connecting USB flash drives.
- +48V PHANTOM (CH1-2) Button: Activates 48V phantom power for condenser microphones on Channels 1 and 2 (XLR inputs only).
- 80Hz HPF Button: Activates a High-Pass Filter to cut low-frequency rumble.
4.2 Rear Panel Connections

Figure 4: Rear Panel with Power and USB Ports
- POWER Button: Turns the mixer on/off.
- Micro B USB Port: Used for 5V DC power supply ONLY.
- Type-B USB Port: Used for 5V DC power supply AND USB Audio data transmission to/from a computer.
- USB Port Selector: A small button next to the USB ports. Press down to select Micro B for power only; bounce up to select Type-B for power and data.
5. Setup
5.1 Powering the Mixer
The TEYUN NA4 mixer operates on 5V DC power. You have several options for powering the device:
- Power Adapter: Connect the included power adapter to a wall outlet and then to either the Micro B or Type-B USB port on the mixer's rear panel.
- Computer USB Port: Connect the mixer to a computer's USB port using the provided USB cable. This can power the mixer and also enable USB Audio functionality if connected to the Type-B port.
- Power Bank: Use a standard 5V USB power bank to power the mixer for portable use.

Figure 5: Powering the mixer via adapter, computer, or power bank
USB Port Selection:
- Micro B Interface: Press the USB port selector button DOWN to use the Micro B port for power supply ONLY.
- Type-B Interface: Let the USB port selector button BOUNCE UP to use the Type-B port for power supply AND data transmission (USB Audio).

Figure 6: The included 1-meter USB cable (Type-A to Type-B)
5.2 Connecting Microphones
The NA4 mixer provides two MIC/LINE input channels (Ch1 and Ch2) with XLR/TRS combo jacks.
- Dynamic Microphones:
Connect your dynamic microphone using an XLR cable to either Channel 1 or Channel 2. Ensure the +48V PHANTOM power is OFF. Using phantom power with dynamic microphones can damage them. - Condenser Microphones:
Connect your condenser microphone using an XLR cable to either Channel 1 or Channel 2. If your condenser microphone requires external power, press the +48V PHANTOM (CH1-2) button to activate phantom power.

Figure 7: +48V Phantom Power switch for Channels 1 and 2

Figure 8: Dynamic microphone connection (use XLR, +48V OFF)

Figure 9: Condenser microphone connection (use XLR, +48V ON if required)
5.3 Connecting to a Computer (USB Audio)
The NA4 mixer features a built-in soundcard function, allowing two-way audio communication with your computer.
- Ensure the mixer's USB port selector is set to Type-B (button bounced up).
- Connect the mixer's Type-B USB port to your computer using the provided USB cable.
- Your computer should automatically detect the mixer as an audio device. You may need to select it as the input/output device in your computer's sound settings.

Figure 10: Mixer signal to PC, PC signal to Mixer
5.4 Connecting to a Mobile Device
You can connect your mobile device to the mixer for mobile recording, live broadcasting, or playing music through the mixer.
- Obtain a TRRS (4-pole) 3.5mm audio cable (not included).
- Connect one end of the TRRS cable to your mobile device's headphone/audio jack.
- Connect the other end of the TRRS cable to the mixer's 3.5mm TRRS socket (labeled CH3-4 IN or similar, typically near the headphone jack).

Figure 11: Connecting mixer to mobile for broadcast/podcast

Figure 12: Example of a TRRS cable (not included)
6. Operating Instructions
6.1 Basic Audio Mixing
- GAIN: Adjust the GAIN knob for each input channel to achieve an optimal input level without clipping (the PEAK LED should not light up frequently).
- HIGH/LOW EQ: Use the HIGH and LOW EQ knobs to shape the tone of each channel.
- Channel Volume: Adjust the individual channel volume knobs to balance the levels of your inputs.
- MAIN Volume: Control the overall output level of the mixer using the MAIN volume knob.
- MAIN PH Volume: Adjust the volume for your headphones using the MAIN PH knob.
6.2 Bluetooth Function
- Pairing:
Press the MODE button on the digital section until