Svbony ST1

Contents

Svbony ST1 4K HDMI Wireless Extender Kit User Manual

Model: ST1

Brand: Svbony

1. Introduction

Welcome to the Svbony ST1 4K HDMI Wireless Extender Kit. This manual provides essential information for the safe and efficient operation of your wireless video transmission system. Please read these instructions carefully before use.

This kit is designed for personal television shooting and studio film/television shooting, offering high-quality 4K30 frame video transmission with low latency and a long transmission range.

2. Safety Cautions

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

2.1. Compliance and Spectrum Usage:

  • Strictly adhere to local radio communication regulations. Ensure legal use within authorized frequency bands to avoid fines or legal issues.
  • Avoid using the equipment in areas with high radio equipment density or known spectrum congestion (e.g., concerts, large event venues) to prevent interference.

2.2. Safety Precautions:

  • Follow the product manual for power connections to prevent short circuits, overloads, or electric shocks.
  • Do not operate in wet or flammable environments.
  • Maintain a safe distance from the equipment, especially during prolonged use or close-range operation. Pregnant women, children, and individuals with implanted medical devices should exercise particular caution regarding RF radiation.

2.3. Transmission Distance and Environmental Factors:

  • Avoid using this product in environments with physical obstacles (buildings, trees, crowds), adverse weather conditions (rain, fog, snow), or strong electromagnetic interference. Exceeding the nominal distance may lead to signal loss or quality degradation.
  • Ensure a clear line of sight. Adjust device position or use relay equipment to enhance signal coverage if necessary.

3. Product Overview

The Svbony ST1 Wireless Extender Kit consists of a transmitter (TX) and a receiver (RX) unit, designed for seamless video transmission.

Svbony ST1 Transmitter and Receiver units with antennas
Svbony ST1 Transmitter (TX) and Receiver (RX) units with antennas.

3.1. Key Features:

  • HD Quality: Supports 4K30 frame video quality.
  • Long Transmission Distance: Up to 300m (984ft) in open conditions.
  • Low Latency: Ultra-low latency of 0.06s.
  • OLED Screen: Displays real-time machine status, including TX/RX identification, WiFi icon, frequency information, and battery level.
  • APP Monitoring: Supports monitoring via Android and iOS system apps.
  • Multiple Receivers: One transmitter can connect to up to four receivers simultaneously.
  • Power Options: Supports NP-F series batteries, 5V2A Type-C, and 9-14V DC power.
  • 9 Selectable Channels: Allows switching between channels to avoid interference.
Image showing 4K30 frame video quality
High Definition 4K30 Frame Video Quality.
Diagram illustrating 300m/984ft long transmission distance
Long Transmission Distance: 300m/984ft.
Image showing 0.06s low latency compared to others
Low Latency: 0.06s.

3.2. Packaging List:

ItemQuantity
Transmitter1
Receiver1
Camera connection bracket1
HDMI cable1
Mini HDMI adapter1
Micro HDMI adapter1
V adapter2
USB-C cable2
Antenna4
Packaging box1

3.3. Typical Application Diagram:

Diagram showing camera connected to TX, TX transmitting wirelessly to RX, and RX connected to two monitors and an APP for monitoring.
Typical setup with camera, transmitter, receiver, monitors, and APP monitoring.

4. Setup and Installation

Follow these steps to set up your Svbony ST1 Wireless Extender Kit:

  1. Install Antennas: Install the four antennas onto the TX and RX units at the appropriate angle.
  2. Mounting: Connect and secure the product base to your camera using screws.
  3. HDMI Connection (Transmitter): Connect the HDMI IN port of the transmitter (TX) to your camera's HDMI output port using an HDMI cable.
  4. HDMI Connection (Receiver): Connect the HDMI OUT port of the receiver (RX) to your monitor's HDMI input port using an HDMI cable.
  5. Power Supply: Press the battery lock button to attach an NP-F series battery (not included) to the back of the product. Alternatively, connect a DC 9-16V power adapter or a 5V2A Type-C power supply to the corresponding power interface.
  6. Power On: Turn on the power switch, and the device will start up.
Video demonstrating the installation process of the transmitter unit onto a camera and connecting the HDMI cable.

The transmitter can support up to 4 receivers, allowing multiple monitoring points.

Image showing one transmitter connecting to multiple receivers
One transmitter can add up to 4 receivers.

5. Operation

5.1. OLED Display Introduction:

The OLED screen on both the TX and RX units provides real-time status information:

  • TX or RX Identification: Indicates whether the unit is a transmitter or receiver.
  • WiFi Icon: Shows connection status and signal strength (5 levels, full capacity being strongest).
  • Frequency Information: Displays the current channel (CH0 to CH8, 9 total).
  • Battery Level: Shows 3 levels of battery status and voltage information.
  • Signal Source Information: Displays "no video" if no video source is connected. Once connected, it shows the video resolution (e.g., 1920x1080P60).
Close-up of the OLED screen displaying 1920x1080P60
OLED screen displaying machine status and video resolution.

5.2. Introduction to Operation Buttons:

  • Product Matching (Pairing): Units are typically pre-paired. If re-pairing is needed, press and hold the "Back button" on both TX and RX OLED screens simultaneously for 5 seconds. Release to complete pairing. The OLED will display "Connecting..." during the process. Successful pairing is indicated by stable WiFi icons; unsuccessful pairing shows "Time Out".
  • Frequency Point Switching (Channel Switching): Use the "left" or "right" keys on the transmitter to switch between 9 available frequency points (CH0-CH8). CH0 is the default. If video is blurry or lagging, try switching channels.
  • Other Menus: Press the "Enter key" on the transmitter or receiver to view version information.
Video demonstrating channel switching on the OLED screen.

5.3. APP Monitoring Function:

Scan the QR code below to install the application on your device. Grant necessary permissions during installation.

Connection Steps:

  1. On your phone/mobile device, search for the Wi-Fi network corresponding to JM300Pro (usually starting with JM01, or press the "Enter" button on the transmitter to view the Wi-Fi name). Enter the default password: 12345678.
  2. If prompted about other available networks, select "No need, thank you." to stay connected.
  3. Open the app and click "CONNECT" to start monitoring. Ensure you accept any User Agreement and Privacy Policy if prompted.
  4. After connecting, you can access the main page to monitor the screen on your mobile or other devices.
Image showing a smartphone displaying the APP monitoring interface connected to the Svbony ST1 unit and a camera.
APP display for monitoring.

6. Maintenance

  • Regularly clean the equipment, especially the antenna area, to prevent dust and dirt accumulation that could affect signal transmission.
  • Avoid prolonged use under extreme temperature, humidity, or vibration conditions.
  • It is recommended to prepare wired or backup wireless transmission solutions for critical applications to prevent data loss.

7. Troubleshooting

7.1. Connection Issues:

  1. OLED screen/Power indicator off: Check if the power supply is working correctly and if the power switch is on.
  2. Battery power: Ensure the battery is fully charged. If using USB-C, use a 5V 2A or higher adapter and check for protocol function, as some phone adapters may cause power output failure.
  3. TX/RX not connecting at close range: If WiFi icons continuously scan after multiple power cycles, re-pair the units by holding the "Back button" on both TX and RX OLED screens for 5 seconds.

7.2. Playback Problems:

  1. "No video" on TX OLED: Verify the HDMI IN connection to the video source and ensure the camera has video output.
  2. Video/Image format mismatch: Ensure the camera's output format matches the wireless system's supported formats. If the OLED shows 4K but the display doesn't support it, adjust the camera's HDMI output to 1080P.
  3. No video on monitor despite RX OLED showing resolution: Reinsert the HDMI cable or check for looseness. If the issue persists, it might be device incompatibility or the monitor not supporting 4K. Try switching the RX HDMI interface (RX has two outputs) or using a different monitor.

7.3. Video/Image Lag:

  1. Check if the HDMI IN/OUT cable is properly connected.
  2. If signal strength is weak, change the frequency band or reduce the distance between TX and RX units.

7.4. APP Connection Problems:

  1. Confirm correct WiFi connection.
  2. If prompted about no internet connection after WiFi, select the correct option to stay connected.
  3. Ensure "Read and Agree to User Agreement and Privacy Policy" is checked in the app.

8. Specifications

AttributeValue
Model NumberST1
Compatible Audio & Video Equipment StylePlayer, Professional Audio Equipment, Stage Equipment, Recording Equipment, Display Equipment
TypeWIFI
Brand Namesvbony
OriginMainland China
Screen Size0.96 inch OLED
Support PowerNP-F Series Batteries and 5V2A type-C and 9-14V DC
Latency0.06s
Transmission Range150m-300m (820 FT/300M in open conditions)
Number Of Channels9
Controller TypePush Button, App
HDMI PortsTX: 1 Input, 1 Loopout; RX: 2 Outputs
Video Resolution4K30, 4K25, 1080P60, 1080P30, 1080P25, 720P60
Operating Temperature-10°C~50°C
Storage Temperature-40°C~50°C
Audio FormatPCM Dual-Channel
Channel Bandwidth40M
Debug ModeOFDM
Size (L x W)67.2mm x 115.5mm
Antenna Length108mm

9. User Tips

  • Always ensure a clear line of sight between the transmitter and receiver for optimal performance and range.
  • If experiencing signal issues, try switching to a different channel using the function buttons.
  • For extended use, consider using external DC power to avoid frequent battery changes.
  • When using the APP for monitoring, ensure all necessary permissions are granted for proper functionality.

10. Warranty and Support

10.1. Guarantee:

Most new Svbony products come with a two-year manufacturer's warranty from the date of purchase. Please retain your guarantee card and proof of purchase for any warranty claims.

Exclusions from Warranty Coverage:

  • Damage caused by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • Products with altered, defaced, or removed serial numbers.

10.2. Contact and Support:

For assistance with repairs, service, or any questions, please contact Svbony through the following channels:

For a list of Svbony-approved accessories for your radio model, please visit the official website.

A user manual in PDF format is also available for download: Svbony ST1 User Manual (PDF)

© 2024 Svbony. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.