Hyper Tough 30009

Contents

Hyper Tough 4-Volts 45-Piece Rechargeable Precision Screwdriver Set

Model: 30009

Introduction

Thank you for choosing the Hyper Tough 4-Volts 45-Piece Rechargeable Precision Screwdriver Set. This manual provides important information on the safe operation, maintenance, and care of your new precision screwdriver. Please read it thoroughly before use and keep it for future reference.

Key Features

  • Rechargeable 4-Volt Lithium-Ion Battery
  • Built-in LED Work Light
  • Forward and Reverse Drive Modes
  • Magnetic Bit Attachment for easy bit changes
  • USB-Type C Charging Cord Included
Hyper Tough 45-Piece 4-Volt Precision Screwdriver Set highlighting key features like rechargeable battery, LED light, forward/reverse mode, magnetic bit attachment, and USB-C charging.
Overview of the Hyper Tough Precision Screwdriver Set with highlighted features.

Package Contents

Your Hyper Tough 45-Piece Rechargeable Precision Screwdriver Set includes:

  • 1 x Hyper Tough 4-Volt Rechargeable Precision Screwdriver
  • 31 x Precision Screwdriver Bits (various types including Phillips, Slotted, Torx, Hex)
  • 6 x Precision Nut Drivers
  • 1 x 2-inch Precision Extension Bar
  • 1 x 4-inch Flexible Precision Extension Bar
  • 4 x Bit Rails for organization
  • 1 x USB-C Charging Cord
All components of the Hyper Tough 45-Piece Precision Screwdriver Set laid out, including the screwdriver, multiple bit rails with various bits, nut drivers, a rigid extension, a flexible extension, and a USB-C charging cable.
All included components of the screwdriver set.

Specifications

Model30009
Voltage4 Volts
Battery TypeRechargeable Lithium-Ion
Number of Pieces45 (Screwdriver, 31 bits, 6 nut drivers, 2 extension bars, 4 bit rails, 1 USB-C cord)
MaterialAlloy Steel (bits)
Approx. Product Weight0.46 kg (1.01 lbs)
Approx. Package Dimensions (H x W x L)25 cm x 12 cm x 2 cm (9.8 in x 4.7 in x 0.8 in)

Setup

Charging the Screwdriver

  1. Locate the USB-C charging port on the screwdriver.
  2. Connect the included USB-C charging cord to the screwdriver and plug the other end into a compatible USB power source (e.g., wall adapter, computer USB port).
  3. Allow the screwdriver to charge fully before first use. An indicator light (if present) will typically change color or turn off when charging is complete.

Attaching Bits and Extensions

  1. Select the appropriate precision screwdriver bit or nut driver for your task from the bit rails.
  2. Insert the chosen bit directly into the magnetic bit holder at the tip of the screwdriver. The magnetic attachment will secure the bit in place.
  3. For extended reach or flexibility, first insert the 2-inch Precision Extension Bar or the 4-inch Flexible Precision Extension Bar into the magnetic bit holder, then insert your desired bit into the extension bar.

Operating Instructions

Powering On and Off

The screwdriver is activated by pressing the trigger button. Release the button to stop operation.

Forward and Reverse Modes

A switch, typically located near the trigger, allows you to select between forward (tightening) and reverse (loosening) rotation. Ensure the switch is in the desired position before operating the screwdriver.

Using the LED Work Light

The built-in LED work light automatically illuminates the work area when the screwdriver is in operation, providing better visibility in dimly lit spaces.

Maintenance

  • Cleaning: Wipe the screwdriver and bits with a clean, dry cloth after each use to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the screwdriver set in a dry, cool place, away from direct sunlight and moisture. Keep all bits organized in their respective bit rails to prevent loss.
  • Battery Care: For optimal battery life, avoid completely draining the battery frequently. Recharge the screwdriver periodically if it's not used for extended periods.

Troubleshooting

  • Screwdriver does not turn on: Ensure the battery is fully charged. Connect the USB-C charging cord and allow sufficient time for charging.
  • Bit slips or strips screw head: Ensure you are using the correct size and type of bit for the screw. Apply firm, steady pressure while operating the screwdriver.
  • Reduced power or short battery life: The battery may need to be recharged. Over time, rechargeable batteries may experience reduced capacity; ensure proper charging and storage practices.

User Tips

  • Always select the correct bit size and type for the fastener to prevent stripping the screw head or damaging the bit.
  • For delicate electronics, start with manual tightening to ensure proper alignment before using the powered function.
  • Utilize the flexible extension bar for reaching screws in awkward or tight spaces.

Warranty and Support

This Hyper Tough product comes with a 2 Year Limited Warranty. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Hyper Tough website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.