To Our Valued Customers
Welcome to your Svbony wireless video transmission product. Please read and understand the following instructions carefully before using this product to ensure optimal performance and safety.
- When using this product, consider the characteristics of your environment. Avoid areas with a large number of metal structures or strong electromagnetic interference sources.
- Before use, verify that the image transmission transmitter matches the video output interface of your camera (e.g., HDMI, USB-C) and supports the required video standards for compatibility with the image transmission receiver.
- Determine the required video resolution, frame rate, and color depth to ensure the selected image transmission meets your project requirements.
- Be aware of potential obstacles (buildings, trees, etc.) that may affect transmission distance. Different products have varying effective transmission ranges; consider the nominal distance and actual performance in complex environments.
- Familiarize yourself with local regulations to ensure legal use and prevent interference with other wireless devices.
- During use, strictly follow the instructions for proper installation, configuration, and regular inspection and maintenance to ensure stable and efficient operation of the wireless image transmission system.
For any questions, please contact us via Email: info@svbony.com, Website: www.svbony.com, or Facebook: www.facebook.com/svbony.
*SVBONY is not responsible for any damage caused by improper handling, natural disasters (fire, earthquakes, floods), or unauthorized service.
Product Overview
The Svbony ST2 TransAir Wireless HDMI Extender Kit consists of a Transmitter (TX) and a Receiver (RX) unit, designed for seamless wireless video transmission.
Figure 1: Svbony ST2 Wireless HDMI Extender Kit (TX and RX units) with accessories.
Figure 2: Svbony ST2 units connected to a laptop, highlighting key features.
Component Identification
| No. | Product Structure | Function Description |
|---|---|---|
| 1 | OLED Display | Displays current signal strength, channel and resolution. |
| 2 | HDMI Port | Supports HDMI Port Connection. |
| 3 | Pairing/Tuning Button |
Pairing: By default, TX and RX devices automatically pair when powered on. If connection is lost, press and hold TX and RX buttons for 5 seconds, then release to initiate re-pairing. (UI will display "PAIRING" prompt.) Tuning: Short press the TX device to switch frequencies (RX device automatically matches TX frequency and cannot be manually tuned). |
| 4 | Type-C port | Supports Type-C for power supply and signal transmission. |
| 5 | Channel connection status |
RX: Displays connection channel information. If not connected, an "X" appears next to signal bars, and "NO TX" message is shown. TX: Displays connection channel information. If not connected, an "X" appears next to signal bars, and "NO RX" message is shown. |
| 6 | Channel Display | CH0-CH8 |
| 7 | Video Source Information | Video Source Resolution Display |
Setup Instructions
Packaging List
Ensure all the following items are included in your package:
- Transmitter (TX) x1
- Receiver (RX) x1
- Mini-HDMI Adapter x1
- Micro-HDMI Adapter x1
- Type-C to HDMI Cable x1
- Type-C Charging Cable x2
- User Manual x1 (This document)
Figure 3: Package Contents.
Equipment Setup and Usage
Before proceeding, ensure your display monitor and power supply equipment are working correctly. You will need to provide your own 5V/2A power plug or power supply device.
- Connect TX Device: Connect the HDMI port of the TX device to your signal source (e.g., computer, DV camera). If the HDMI port does not fit, use the provided Mini-HDMI, Micro-HDMI, or Type-C to HDMI adapters.
- Connect RX Device: Connect the HDMI port of the RX device to your monitor or TV. If the HDMI port does not fit, use the provided Mini-HDMI, Micro-HDMI, or Type-C to HDMI adapters.
- Power Supply: Use the two supplied USB cables to connect the Type-C ports on both the TX and RX devices to your 5V/2A power source.
- Verify Connection: After all connections (transmitter, receiver, signal source, display monitor, and power supply) are established, the signal icon and video source information on both the TX and RX devices should display normally. This indicates a successful connection, as the devices are pre-paired from the factory.
Figure 4: Installation Steps.
Device Compatibility
Figure 5: Compatible Devices.
Figure 6: Included Adapters and Cables.
Operating Instructions
Initial Connection and Display
Once the devices are connected and powered, the OLED display on both the TX and RX units will show the current signal strength, channel, and resolution. The devices are pre-paired for immediate use.
Video 1: Official product video demonstrating features and usage.
Pairing and Tuning
- Pairing: If the connection is lost, press and hold the Pairing/Tuning button on both the TX and RX devices for 5 seconds, then release. The units will re-pair automatically.
- Tuning: Short press the Pairing/Tuning button on the TX device to switch between available frequencies (CH0-CH8). The RX device will automatically match the TX frequency.
Display Settings
For optimal performance, it is recommended to use a display device that supports 1080P resolution. If using a 4K screen for transmission, ensure the video output is set to 1080P to prevent blurry image quality.
If your display device does not show content after connection, check your computer's display settings and adjust them to either "Duplicate" or "Extend" mode.
Figure 7: Example of display settings for Duplicate or Extend mode.
Maintenance
To ensure the stable and efficient operation of your wireless image transmission system, perform regular inspections and maintenance. Keep the devices clean and free from dust. Avoid exposing the units to extreme temperatures or humidity.
No specific user-serviceable parts are inside. Do not attempt to disassemble or repair the device yourself.
Troubleshooting
Common Issues and Solutions
- Q: The transmitter and receiver cannot connect.
- A: After powering on both devices within 5 minutes, press and hold the Pairing/Tuning buttons on both the TX and RX for more than 5 seconds, then release. Repeat this process once more. The devices should automatically pair.
- Q: After connecting, the display device shows no screen content.
- A: Check if the receiver is powered on (indicator light should be on) and connected to the HDMI port of the display device. Switch to the corresponding input source on your display. If the issue persists, try using a different HDMI port.
- Q: After connecting, the screen displays "NO VIDEO".
- A: Check all cable connections and ensure the signal source is functioning correctly. If the problem persists, check your computer's display settings and adjust to "Duplicate" or "Extend" mode.
- Q: After connecting, the screen at the receiver is blurred.
- A: If the transmitter is connected to a computer and the expansion screen connected to the receiver is blurred, adjust the resolution of the expansion screen to match the resolution of the computer's transmission or the TV's reception mode.
Connection Check Diagrams
Figure 8: Check TX and RX Connection.
Figure 9: Check Signal Source Connection.
Specifications
| Parameter | Value |
|---|---|
| Model Number | TransAir (ST2) |
| Type | WIFI |
| Power Consumption | TX: 4W; RX: 4W |
| Power Supply | Type-C 5V/2A |
| Frequency | 5GHz |
| Supported Interfaces | TX: HDMI Input; RX: HDMI Output |
| HDMI Input/Output Video Resolution | 1080P60, 1080P50, 1080P30, 1080P25, 720P60, 720P50, 720P25, etc. |
| Audio Format | PCM Dual Channel |
| Debug Mode | OFDM |
| Bandwidth | 20M |
| Operating Temperature | -10°C to 50°C |
| Latency | 0.06s |
| Transmission Distance (Open Conditions) | 50-80m |
| Size | 74*24*13mm |
| Screen | 0.42cm |
| Package | Yes |
Warranty and Support
Guarantee Information
This guarantee card should be kept by the user; no replacement if lost. Most new products carry a two-year manufacturer's warranty from the date of purchase.
For warranty and after-sales service, please:
- Contact the seller where you purchased the product.
- Contact our Local Repair Center for product repairs.
For warranty service, a receipt or proof of purchase from the actual seller is required for verification.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Damage due to misuse or abuse of the product, or as a result of unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
Regulatory and Safety Warnings
1. CAUTION: RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Before using this device, read this guide for important operating instructions for safe usage, control information, and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. User instructions should accompany the device when transferred to other users.
2. Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Replacement of any transmitter component not authorized by the local government radio management departments could violate regulations.
3.1 US FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. If this equipment causes harmful interference to radio or television reception, try to correct the interference by: reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to an outlet on a different circuit.
3.2 Canadian IC Requirements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Detachable antenna: This radio transmitter has been approved by Innovation, Science and Economic Development Canada to operate with antenna types listed below, with maximum permissible gain indicated. Antenna types not included in this list with greater gain than the maximum indicated are strictly prohibited.
4. European CE Requirements
Hong Kong Svbony Technology Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.svbony.com.
5. Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging indicates that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to local laws and rules.
6.1 RF Safety (Applicable to TX products)
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum. RF energy, if used improperly, can cause biological damage. For more information on RF energy exposure and control, refer to http://www.who.int/en/.
To reduce RF exposure: reduce wireless device usage time, use hands-free accessories (speakerphone, earpiece, headset), and increase distance between wireless devices and your body. Transmit no more than 50% of the time.
6.2 Special for License-Free Transmitters
This radio is designed and classified for "General population/uncontrolled use," where individuals may not have knowledge or control of RF exposure levels.
7. Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic interference (EMI). During transmissions, your radio generates RF energy that can cause interference with other devices. To avoid interference, turn off the radio in areas where signs are posted, such as hospitals or healthcare facilities.
8. Special for Children's Products
WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years.
Figure 10: Choking Hazard Warning.
PDF User Manual Reference
A detailed user manual in PDF format is available for download. This document contains additional information and diagrams that may be helpful for advanced users or specific scenarios.
You can access the PDF manual here: Svbony ST2 User Manual (PDF)
User Tips
- Easy Setup: Users have reported that the device is very easy to set up and connect, often working perfectly right out of the box.
- Reliable Performance: The system provides stable and smooth video transmission, making it suitable for various applications.
- Quick Response: The low latency ensures a responsive and fluid viewing experience.