DESLOC C110

Contents

DESLOC C110 Smart Fingerprint Deadbolt User Manual

Keyless Entry Door Lock with Display

1. Product Introduction

The DESLOC C110 Smart Fingerprint Deadbolt offers advanced security and convenient access to your home. This keyless entry system integrates multiple unlocking methods including fingerprint recognition, a numeric keypad, and traditional mechanical keys. Designed for ease of use and robust performance, it features a clear display for intuitive operation and user management.

DESLOC Smart Lock with display showing menu options and icons for fingerprint, keypad, and key unlock methods.

Figure 1.1: DESLOC C110 Smart Lock with display menu and unlock method icons.

Key Features:

  • Multiple Unlock Methods: Fingerprint, Passcode, and Mechanical Key.
  • Visualized Operation: 0.96" LockVue™ Display for easy setup and status monitoring.
  • Fast Fingerprint Entry: Recognition time less than 0.3 seconds with over 99% accuracy.
  • User Management: Store up to 100 fingerprints and manage multiple user passcodes.
  • Passage Mode: Keep the door unlocked for easy access during gatherings.
  • Auto-Lock Function: Customizable auto-lock timer for added security.
  • Emergency Power: Type-C backup power port for emergency charging.
  • Durable Design: Operates in temperatures from -22°F to 158°F.

2. Specifications

ParameterDetail
Power Supply4x AA Batteries (Sold Separately)
Working Temperature-30°C ~ 70°C (-22°F ~ 158°F) (Non-Condensing)
Fit Door Thickness35mm ~ 50mm (1-3/8" to 2")
MaterialAluminium Alloy
Unlock MechanismFingerprint, Key, Passcode
Passcode Storage100 Groups
Fingerprint Storage50 Groups
Relative Humidity<95%
Finish TypePainted
Suitable Door TypeSteel Door, Wooden Door, Other
Handle DirectionDirection Reversible
Waterproof RatingIP54
CertificationsCE, FCC

3. Package Contents

Before installation, please verify that all components are present and in good condition:

  1. Exterior Lock Assembly
  2. Interior Lock Assembly
  3. Mounting Plate
  4. Strike Plate
  5. Deadbolt Latch
  6. Mechanical Keys (2)
  7. Deadbolt/Strike Plate Screws
  8. Mounting Plate Screws
  9. Interior Lock Screws

4. Setup and Installation

For a visual guide, please watch the official installation video:

Video 4.1: DESLOC C110 Smart Lock Installation and Operation Guide.

4.1 Measure the Door Size

Ensure your door meets the following specifications:

  • Door Thickness: 1-3/8" to 2" (35mm to 50mm)
  • Hole Diameter: 2-1/8"
  • Backset Size: 2-3/8" or 2-3/4" (distance from door edge to center of bore hole)

4.2 Adjust the Length of the Deadbolt

The deadbolt is adjustable. If your door requires a 70mm backset, turn the faceplate 180° to extend the deadbolt length. For a 60mm backset, the deadbolt is set correctly as is.

4.3 Install Deadbolt

  1. Insert the deadbolt into the door edge.
  2. Ensure the word "UP" on the deadbolt is facing upwards.
  3. Secure the deadbolt with two deadbolt screws. Keep the deadbolt retracted during this step.

4.4 Install Exterior Lock

  1. Route the cable from the exterior lock below the deadbolt.
  2. Ensure the paddle on the exterior lock is in a 'horizontal' position.
  3. Align the exterior lock with the door hole and deadbolt.

NOTE: Do not insert the mechanical key during installation.

4.5 Fix the Mounting Plate

  1. Peel off the tape from the mounting plate.
  2. Thread the exterior lock cable through the hole in the mounting plate.
  3. Align the mounting plate over the deadbolt and secure it to the door with two mounting plate screws.

4.6 Install the Interior Lock

  1. Connect the exterior lock cable securely to the corresponding port on the interior lock.
  2. Turn the doorknob on the interior lock horizontally.
  3. Insert the paddle of the interior lock into the deadbolt mechanism.
  4. Carefully push the interior lock against the door, ensuring excess cables are tucked into the designated wire-housing areas or the door hole.

NOTE: Do not insert batteries until the lock is fully installed and tested.

4.7 Fix the Interior Lock

  1. Open the battery cover of the interior lock.
  2. Secure the interior lock to the mounting plate with three interior lock screws.
  3. Rotate the doorknob to test if the deadbolt extends and retracts smoothly. If not, recheck alignment and cable routing.

4.8 Install Batteries

  1. Insert four AA batteries into the battery compartment, observing the correct polarity (+/-).
  2. Close the battery cover. The lock will power on.

5. Operating Instructions

5.1 Button Description

  • Number Buttons (0-9): Used for entering PINs, numbers, and names. Also functions as letter switching (e.g., press '2' once for '2', twice for 'A', thrice for 'B').
  • MENU Button: Enters settings interface, returns to previous menu, and acts as a backspace/delete key.
  • ENTER Button (Lock Icon): Confirms current operation, moves cursor, and locks the door when pressed.
  • Up/Down Arrows (on 7 and 9 keys): Scrolls menu items up or down.

5.2 Initial Setup and PIN Change

Upon first power-on, the lock will guide you through initial setup.

  1. Press the MENU button.
  2. Enter the initial management PIN: 123456.
  3. Press the ENTER button to confirm. The lock will automatically detect the door's opening direction. Keep the door open and avoid operations during this detection.
  4. You will be prompted to add an administrator. Enter an administrator name (e.g., "Ab" by pressing '2' twice for 'A', then '2' thrice for 'b'). Press ENTER to confirm.
  5. Enter a new 6-8 digit PIN for the administrator. Press ENTER.
  6. Re-enter the new PIN to confirm. Press ENTER.

NOTE: It is crucial to change the initial management PIN (123456) immediately after installation for security purposes.

5.3 Fingerprint Collection

For optimal performance, use your thumb as the unlocking finger. Ensure your finger and the fingerprint reader are clean and dry.

  1. Access the fingerprint collection menu (e.g., when adding an admin or user).
  2. Place your finger flat on the fingerprint reader.
  3. Lift and place your finger repeatedly (typically 6 times) as prompted by the display until "Config Successful" appears.

NOTE: If "Config Fail" appears, retry the process. Avoid using the same finger for both administrator and regular user profiles.

5.4 Adding Administrators (Fingerprint & PIN)

Administrators have full control over lock settings and user management.

  1. Press MENU.
  2. Navigate to Add Admin.
  3. Select Add Admin FP (for fingerprint) or Add Admin PIN (for passcode).
  4. For New Admin: Select Add User, enter a name, and follow on-screen prompts for fingerprint collection or PIN entry/confirmation.
  5. For Existing Admin: Select Select User, choose the admin's name, and follow prompts to add/update fingerprint or PIN.

5.5 Adding Users (Fingerprint, PIN & Temporary PIN)

Regular users can unlock the door but cannot change settings or manage other users.

  1. Press MENU.
  2. Navigate to Add User.
  3. Select Add User FP, Add User PIN, or Add Temp PIN.
  4. For New User: Select Add User, enter a name, and follow on-screen prompts for fingerprint collection or PIN entry/confirmation.
  5. For Existing User: Select Select User, choose the user's name, and follow prompts to add/update fingerprint or PIN.
  6. For Temporary PIN: Select Add Temp PIN. The lock will generate 4 one-time use passcodes valid for 30 seconds. Record these immediately.

5.6 Deleting Users

  1. Press MENU.
  2. Navigate to Del User.
  3. To Delete a Single User: Select Del User, choose the user's name, and confirm. (Primary administrator cannot be deleted).
  4. To Delete All Regular Users: Select Del All User, confirm with YES.
  5. To Delete Temporary PINs: Select Del Temp PIN, and confirm.

5.7 Lock Settings

  1. Press MENU.
  2. Navigate to Lock Settings.
  3. Open Direction: Set the door's opening direction (Left Open/Right Open).
  4. Lock Setup:
    • Passage Mode: Enable/Disable. When enabled, the lock remains unlocked for easy access. Can be quickly toggled by pressing '5' after unlocking.
    • Auto Lock: Set the time (5-120 seconds) after which the door automatically locks.
  5. Sound Setup: Turn lock sounds ON or OFF.
  6. Factory Reset: Resets the lock to factory defaults, erasing all user data and restoring the master PIN to 123456.

6. Maintenance

6.1 Battery Replacement

The lock will provide low battery warnings. Replace batteries promptly to ensure continuous operation.

  1. When a low battery warning (Level 1 or 2) appears on the display, open the battery cover on the interior lock.
  2. Remove the old AA batteries.
  3. Insert four new AA batteries, ensuring correct polarity.
  4. Close the battery cover.

6.2 Emergency Charging

If batteries completely drain, the lock can be temporarily powered using a Type-C USB power bank connected to the emergency charging port on the exterior lock. This allows you to unlock the door using a registered fingerprint or passcode.

6.3 General Care

  • Keep the fingerprint sensor and keypad clean and dry.
  • Avoid using abrasive cleaners or solvents on the lock's surface.
  • Ensure the door frame and strike plate are free from obstructions.

7. Troubleshooting

Issue/Warning IconDescription & Solution
Failed / Check DeadboltIndicates the lock is not properly closed or opened. Check the deadbolt alignment, door frame, and battery level.
Low Battery Replace (Level 1)Low battery alarm. Replace batteries immediately.
Low Battery Inoperable (Level 2)Critical low battery. Replace batteries immediately. If power runs out, use mechanical key or emergency Type-C power.
Passage Mode IconIndicates Passage Mode is currently active (door will not auto-lock).
Lock does not respondCheck battery installation and level. Use emergency power if batteries are dead.
Fingerprint not recognizedEnsure finger and sensor are clean and dry. Try re-registering the fingerprint.
Keypad not respondingTap the keypad to activate backlight. Check battery level.

8. User Tips

  • Battery Life: For optimal battery life, use high-quality alkaline AA batteries. Avoid mixing old and new batteries.
  • Fingerprint Accuracy: When registering fingerprints, try to capture different angles of your finger for better recognition.
  • Passcode Security: Utilize the anti-peeping password feature by entering random digits before or after your actual passcode to prevent others from guessing it.
  • Door Alignment: Ensure your door is properly aligned and closes smoothly. Misalignment can cause the deadbolt to jam or prevent proper locking.

9. Warranty and Support

The DESLOC C110 Smart Fingerprint Deadbolt comes with a 12-month warranty from the date of purchase.

For technical support, warranty claims, or any inquiries, please contact DESLOC customer service:


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.