ToolKitRc M4AC

Contents

ToolkitRC M4AC Balance Charger User Manual

Model: M4AC | Brand: ToolkitRC

1. Introduction

Thank you for purchasing the M4AC balance charger. Please read this manual carefully before use to ensure optimal performance and safety.

For further information, news, and firmware updates, please visit the official ToolkitRC website: www.toolkitrc.com.

Video: Unboxing the ToolkitRC M4AC Balance Charger, showing package contents and initial look at the device.

2. Safety Information

  • The M4AC accepts an input voltage of AC100-240V. Do not change or modify the power cable. Ensure the charger is connected only to a suitable AC power outlet.
  • Do not use this product in environments with high heat, humidity, flammable liquids, or explosive gases.
  • Always supervise the charger during operation. Never leave charging batteries unattended.
  • Unplug the input power when the product is not in use.
  • When using the charging function, set a current that matches the battery's specifications. Avoid excessive current to prevent battery damage. Always consult your battery manufacturer's guidelines for correct charging instructions.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Product Description and Features

The M4AC is a compact yet powerful AC balance charger designed for various battery types. It features an IPS wide-viewing angle display and offers high charging accuracy.

Key Features:

  • Charges and balances LiPo, LiHV, LiFe, and Lion 1-4S batteries.
  • Wide voltage input: AC 100-240V, 30W.
  • Maximum charging current: 2.5A @MAX 25W.
  • Adjustable Lithium battery cut-off voltage (TVC function).
  • Manual calibration for battery voltage.
  • High charging accuracy: <0.005V.
  • Balance current: 200mA.
  • 1.54-inch IPS full viewing angle display with 240x240 pixel resolution.

4. M4AC Layout

M4AC Front Layout Diagram

Figure 4.1: Front view of the M4AC charger, highlighting the display screen, Type/Current button, XT60 output main port, 2-4S balance port, and heat dissipation vents.

M4AC Back Layout Diagram

Figure 4.2: Back view of the M4AC charger, showing the AC input port and heat dissipation vents.

Component Identification:

  • Display Screen: Shows charging status, battery information, and settings.
  • Type/Current Button:
    • Long press: Selects battery type (cut-off voltage).
    • Short press: Selects charging current.
  • XT60 Output Main Port: Primary connection for charging batteries.
  • 2-4S Balance Port: Connects to the battery's balance lead for cell balancing during charging.
  • Heat Dissipation Vents: Ensures proper cooling during operation.
  • AC Input Port: Connects to the AC power supply (100-240V).

5. Setup (Quick Start)

  1. Connect the M4AC to a suitable 100-240V AC power outlet using the provided power cable.
  2. Upon power-up, the display will show the boot logo for approximately 2 seconds.
  3. After booting, the screen will enter the main interface, typically showing "Standby" and default voltage/current settings.
  4. Unlock the Charger: Short press the [Type/Current] button to release the locked state. This is a safety feature to prevent accidental changes.
  5. Select Cut-off Voltage (Battery Type): Long press the [Type/Current] button to cycle through and select the desired battery cut-off voltage (e.g., 4.20V for LiPo, 4.35V for LiHV).
  6. Select Charging Current: Short press the [Type/Current] button to cycle through and select the desired charging current (e.g., 0.5A, 1.0A, 2.0A, 2.5A).
  7. Start Charging: Once the output main port (XT60) and the balance port are correctly connected to a battery, and the voltage settings match, the charger will automatically begin charging.

Tip: Every time you turn on the charger, you need to press the button once to release the lock. This safety feature is to prevent incorrect selection of battery type and current.

6. Operating Instructions (Charging Settings)

6.1. Battery Type Setting

After connecting power and unlocking the charger, long press the [Type/Current] button to select the battery cut-off voltage (battery type). The display will show the available options:

Cut-off Voltage Battery Type
4.20VLiPo
4.35VLiHv
3.85VLipo-Storage
3.60VLiFe

⚠ Important: Choosing the wrong battery type to charge may damage the battery, the charger, and cause fire hazards. Please choose carefully. Do not use this product to charge batteries that are not marked with a specific battery type.

Vocabulary Explanation:

  • LiPo: Lithium Polymer battery, nominal voltage 3.70V, 4.20V when fully charged.
  • LiHV: High-voltage Lithium battery, nominal voltage 3.85V, 4.35V when fully charged.
  • LiFe: Iron-Lithium battery, nominal voltage 3.30V, 3.60V when fully charged.
  • Lion: Lithium-ion battery, nominal voltage 3.60V, 4.10V when fully charged.

6.2. Current Setting

Short press the [Type/Current] button to select the charging current. Available current levels are 0.5A, 1.0A, 2.0A, and 2.5A.

Tip: It is recommended to use a charging rate of 1C-2C. For example, for a 1000mAh battery, use 1.0A-2.0A. This improves battery cycle life. Always check your battery manufacturer's guidelines.

6.3. Start Charging

After setting the battery voltage and current, connect the battery to the charger. The charger will automatically start charging once it detects that the voltage between the main port and the balance port matches the selected settings.

M4AC Charger in operation, showing charging screen

Figure 6.1: M4AC charger displaying active charging status with battery voltage and current.

Display Content Description during Charging:

  • 000:10: Indicates the elapsed charging time.
  • Charging: Current working status of the charger.
  • 4.20V: The selected rechargeable battery type (cut-off voltage).
  • 4.35V 3.85V 3.60V: Other available types of rechargeable batteries.
  • 16.0V: Current rechargeable battery voltage.
  • 1.56A: Current charging current.
  • P: Power current limit sign.
  • T: High temperature current limit sign.
  • E: Indicates the battery or one of the cells is full.
  • 888mAh: Accumulated capacity that has been charged.
  • 1 4.000V: Voltage of the first cell. If not balancing, it will be indicated.
  • 2 4.001V: Voltage of the second cell. If slowly balancing, it will be indicated.
  • 3 4.002V: Voltage of the third cell. If slowly balancing, it will be indicated.
  • 4 4.005V: Voltage of the fourth cell. If quickly balancing, it will be indicated.

Tip: When charging a 1S battery, the battery voltage needs to be provided to the balance port at the same time, so that the charger can recognize and start charging.

7. Terminal Voltage Setting and Manual Calibration

Before connecting to the power supply, press and hold the [Type/Current] button to enter the calibration mode. The screen will display options for terminal voltage and calibration voltage.

M4AC Calibration Mode Screen

Figure 7.1: M4AC display in calibration mode, showing terminal voltage and individual cell calibration options.

  • Terminal Voltage: This is the target voltage after the battery is fully charged. Each battery allows modification within a range of plus or minus 10mV.
  • Calibration Voltage: If cell voltage readings appear incorrect, use a high-quality voltage meter to measure the actual voltage. Then, set this measured value on the charger to achieve voltage calibration.
  • DEFAULT: Select this option to restore the charger to its factory default settings.

8. Maintenance

  • Keep the charger clean and dry. Avoid exposing it to dust, dirt, or moisture.
  • Do not attempt to disassemble or modify the charger. This will void the warranty and could lead to damage or injury.
  • Store the charger in a cool, dry place when not in use.
  • Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.

9. Troubleshooting

  • Charger not powering on: Ensure the AC power cable is securely connected to both the charger and a working power outlet. Verify the power outlet is active.
  • Charging not starting:
    • Check if the charger is unlocked (short press [Type/Current] button).
    • Ensure the battery type and current settings are correctly selected.
    • Verify that both the XT60 main port and the balance port are properly connected to the battery.
    • Confirm the battery voltage matches the charger's detection range for the selected cell count.
  • Incorrect voltage readings: Refer to Section 7, "Terminal Voltage Setting and Manual Calibration," to calibrate the charger using a high-quality voltage meter.
  • Overheating: Ensure the heat dissipation vents are not blocked and the charger is used in a well-ventilated area. Reduce charging current if overheating persists.

10. User Tips

  • The M4AC is praised for its compact size and ease of use, making it convenient for transport.
  • Users appreciate the clear display and straightforward operation.
  • Always double-check battery connections and settings before initiating a charge to prevent issues.

11. Specifications

Category Parameter Value
InputInput VoltageAC 100-240V @MAX 30W
Battery TypeLiPo, LiHv, LiFe, LipoStorage (1-4S)
ChargingCharging Power0.5-2.5A @ 25W
Balance CurrentMAX 200mA @2-4S
Charging Accuracy<0.005V
DisplayLCD Type & ResolutionIPS 1.54 inch, 240*240 resolution
Product DimensionsSize75mm*54mm*30mm
Weight120g
Individual PackingSize80mm*58mm*58mm
Weight180g

12. Warranty and Support

For warranty information, technical support, and further assistance, please visit the official ToolkitRC website or contact their customer service directly.

Official Website: www.toolkitrc.com

A PDF version of this user manual is also available for download: ToolkitRC M4AC User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.