1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless Carplay Android Auto Module. This module is designed to upgrade your Volkswagen Touareg RNS850 system (models 2011-2018 with an 8-inch screen) by adding Wireless CarPlay, Android Auto, Mirroring, and USB media playback functionalities while retaining the original car system.
2. Safety Information
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical damage or injury.
- If you are unsure about any installation steps, consult a professional installer.
- Do not operate the device or adjust settings while driving. Always prioritize safe driving.
- Keep all cables and connections secure to prevent interference or short circuits.
3. Package Contents
Please verify that all items listed below are included in your package:
- CarPlay Decoder Box
- Power Cable Harness
- OBD-CAN Cable
- USB-AV Cable
- LVDS-IN Cable
- LVDS-OUT Cable
- WiFi Antenna
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | CARABC |
| Compatible Vehicle | Volkswagen Touareg (2011-2018) with 8-inch RNS850 Screen |
| Din Size | One Din (Adapter Type) |
| Digital Media Format | CD (Refers to compatibility with original head unit) |
| Output Type | Colored (Video Output) |
| Origin | Mainland China |
| Package Length | 24 cm |
| Package Width | 16 cm |
| Package Height | 9 cm |
| Package Weight | 1.086 kg |
5. Setup and Installation
Careful installation is crucial for optimal performance. Follow these steps for proper setup.
5.1 Functional Statement Overview
The module provides the following key functionalities:
- CarPlay / Android Auto: Integrates iPhone/Android interaction with the central control knob. Supports wireless and wired connections, voice control for phone, information, navigation, and music.
- Reversing Video Input: Smart module decodes video and supports rear-view camera input.
- Mirroring: Supports wired and wireless mirroring for iPhone and Android phones.
- USB Video Playback: Automatic media playback from a USB disk for video and audio.
5.2 Cable Connection Chart
Refer to the diagram below for the overall cable connection. Ensure all connections are secure and correctly routed.
Key connections:
- Connect the Original LVDS cable from the car's display to the module.
- Connect the New LVDS cable from the module to the head unit.
- Integrate the New Power Cable Harness with the vehicle's original power supply.
- Connect the OBD and USB cables to the module.
- Ensure the LVDS In and LVDS Out ports on the module are correctly used.
5.3 WiFi Antenna and USB-AV Cable Connection
Proper connection of the WiFi antenna and USB-AV cable is essential for wireless functions and external media playback.
5.4 Initial Power-Up and Interface Switching
Once all cables are connected, power on your vehicle. You can switch between the original car interface and the CarPlay/Android Auto interface by long-pressing the 'MEDIA' button on your car's control panel.
6. Operating Instructions
6.1 Wireless CarPlay Connection
- On your smartphone, go to Settings > Bluetooth.
- Check for a Bluetooth device name starting with "CAR-xxxx" (e.g., "CAR-Seba").
- Turn on Wi-Fi on your phone and keep it active.
- Return to Bluetooth settings and select the "CAR-xxxx" device. A pairing request window will pop up. Select "Pair" and then "Use CarPlay".
6.2 Apple Wireless Screen Mirroring
- On your smartphone, select "AirPlay" from the SmartPhone Setting menu.
- Turn on Wi-Fi on your phone. In the Wi-Fi search bar, look for "CAR-WIFI-XXX" and connect. The password is 66668888.
- After successful Wi-Fi connection, return to your phone's main interface. Open the shortcut menu (Control Center) and select "Screen Mirroring".
- Once "Screen Mirroring" is turned on, select "AirPlay" from the available devices to complete the wireless screen mirroring.
6.3 Wireless Android Auto Connection
- On your smartphone, go to Settings > Bluetooth.
- Check for a Bluetooth device name starting with "CAR-xxx" (e.g., "CAR-Seba").
- Click on the Bluetooth name beginning with "CAR-xxx". A pairing request will pop up; click "Pairing".
- After successful Bluetooth pairing, follow the Android Auto connection process on your phone screen. Ensure the Android Auto app is installed and running on your mobile phone for automatic connection.
6.4 Android Wireless Screen Mirroring
- Download the AutoLink app on your Android phone by scanning the QR code provided in the product interface or by searching in your browser.
- In the module's settings page, switch the "WIFI Auto Link" option to "ON".
- Open the downloaded AutoLink software on your phone. Search for "CAR-WIFI-XXXX" and connect. Then, click "START NOW" on the phone prompt box.
- The media sound for AutoLink mirroring will connect via Bluetooth.
6.5 Online Navigation and Music Playback
Once connected, you can utilize various navigation and music applications directly on your car's screen.
6.6 Audio Settings: Call Echo Cancellation
If you experience echo during phone calls, perform the following steps to calibrate the echo cancellation:
- Navigate to Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button.
- When correcting the echo, ensure the car is quiet.
- Set the volume to a moderate position.
- Click "Start Auto AEC" again.
- Wait 20 seconds for the estimation process to complete.
7. Maintenance
- Keep the module and connections free from dust and moisture.
- Avoid exposing the device to extreme temperatures.
- Do not attempt to open or repair the module yourself, as this may void the warranty and cause damage.
- Regularly check cable connections for any signs of wear or looseness.
8. Troubleshooting
If you encounter issues, please review the following common problems and solutions:
- No Display/Connection Issues:
- Ensure all cables (power, LVDS, USB, WiFi antenna) are securely connected according to the diagrams in Section 5.
- Verify that the correct input source is selected on your car's head unit (long-press 'MEDIA' button).
- Check your phone's Bluetooth and Wi-Fi settings for proper pairing and connection.
- OEM Camera/Microphone Not Working:
- Some users have reported issues with OEM camera or microphone compatibility. This can often be related to the module's DIP switch settings. Unfortunately, specific DIP switch instructions are not provided in this manual. Please refer to the official support channels for detailed DIP switch configurations for your specific vehicle model and OEM features.
- Rear View Camera Image Disappears After 5 Seconds:
- This indicates a potential configuration issue. Check the module's settings for camera input duration or trigger settings. If available, consult the PDF manual or contact support for specific adjustments related to the rear camera.
- Echo During Phone Calls:
- Perform the Call Echo Cancellation steps outlined in Section 6.6.
If the problem persists, please gather the following information before contacting support:
- The car model and year.
- The screen size of the car's display.
- Details of the toggle switch setup (if applicable).
- Pictures of the LVDS cable connection.
- The software version (found in the CarPlay decoder menu: Settings > System Version).
9. User Tips
- Many users find the installation straightforward, especially with the aid of a good installation video. Take your time and follow the steps carefully.
- Once installed, the module connects quickly and provides a stable connection for CarPlay and Android Auto.
10. Warranty and Support
For further assistance, detailed instructions, or warranty information, please refer to the official user manual PDF. You can access the PDF manual here.
For technical support, please contact CARABC customer service with the information gathered during troubleshooting.