YSRSAI TRI-C1WR

Contents

Miboxer TRI-C1WR AC Triac Dimmer User Manual

Model: TRI-C1WR | Brand: YSRSAI

1. Introduction

The Miboxer TRI-C1WR is an advanced AC Triac Dimmer designed for smart lighting control. It integrates WiFi, 2.4G RF, and traditional push dimming technologies, offering versatile control options. This dimmer is compatible with the Tuya Smart Life app and can be controlled via voice commands using Amazon Alexa and Google Assistant. It supports a wide range of dimmable light sources, including Triac dimming LED lamps, traditional filament lamps, and halogen lamps.

Key features include:

  • Uses WiFi + 2.4G + PUSH wireless transmission technology.
  • Smartphone APP control via Tuya Smart Life.
  • 2.4G RF wireless remote control compatibility.
  • Push dimming function for direct manual control.
  • Trailing edge phase-cut technology for smooth dimming.
  • 0-100% stepless dimming with flicker-free performance.
  • Lowest brightness setting function.
  • Built-in temperature detecting switch for over heat/loading protection.
  • Auto transmitting function for extended 2.4G RF control distance.
  • Reliable screw connectors for easy installation.
  • Anti-fire PC shell for enhanced safety.

2. Safety Precautions

WARNING: Electrical shock hazard. Always turn off power supply before installation or maintenance.

  • Ensure input voltage matches the device requirements (100-240V~50/60Hz).
  • Do not disassemble the device if you are not an expert, as this may cause damage.
  • Avoid installing the dimmer in areas with extensive metal surfaces or strong electromagnetic waves, as this can severely affect the remote control distance and signal transmission.

3. Package Contents

Please check the package for the following items:

  • Miboxer TRI-C1WR AC Triac Dimmer Module
  • User Manual (this document)
  • (Optional, depending on purchase) K1 Rotating Switch Panel Remote

4. Specifications

ParameterValue
Model No.TRI-C1WR
Item TypeDimmers
Input Voltage100-240V~50/60Hz
Output100-240V~
Output CurrentMax 1.36A
Output Power150W@110V; 300W@220V
Max. Load Power100-240W
ProtocolWiFi/ 2.4GHz RF
Control Distance (2.4G)30M
IP RatingIP20
Working Temperature-10~40 °C
MaterialABS
CertificationCCC, CE, UL, EMC, LVD, RED
Dimensions (Dimmer Module)49mm (L) x 49mm (W) x 25.5mm (H)
Dimensions of the TRI-C1WR AC Triac Dimmer module
Figure 1: Dimensions of the TRI-C1WR AC Triac Dimmer module.

5. Installation

5.1 Connection Diagram

Ensure power is OFF before wiring. Connect the dimmer according to the diagram below. The dimmer supports Triac dimming LED lights, traditional filament lamps, and halogen lamps.

Wiring diagram for Miboxer AC Triac Dimmer
Figure 2: Connection Diagram for the TRI-C1WR Dimmer. Input (L, N) and Output (N, L1) connections are shown, along with PUSH DIM terminals.

Wiring Instructions:

  • Input: Connect the Live (L) and Neutral (N) wires from your power supply to the "INPUT" terminals.
  • Output: Connect the Neutral (N) and Live (L1) wires of your dimmable light fixture to the "OUTPUT" terminals.
  • PUSH DIM: Connect your push switch to the "PUSH DIM" terminals (L1 and PUSH DIM).

5.2 Physical Installation

The dimmer module is designed for installation in a standard junction box. For optimal signal transmission, it is recommended to use a plastic junction box. The depth of the junction box should be over 50mm.

Installation diagram for Miboxer AC Triac Dimmer in a junction box
Figure 3: Installation of the TRI-C1WR Dimmer in a junction box. Shows the dimmer module fitting into a standard electrical box.

Note: Metal junction boxes may act as a barrier for signal transmission, potentially reducing the effective range of WiFi and 2.4G RF control.

6. Operation

6.1 PUSH Dimming

The dimmer supports control via a traditional push switch connected to the PUSH DIM terminals.

  • Short press: Quickly press and release the PUSH switch to turn the light ON or OFF.
  • Long press: Press and hold the PUSH switch for stepless dimming.
    • To increase/decrease brightness: Long press and release your finger, then repeat the long press to change the dimming direction.
    • For multi-dimmer synchronization: If multiple dimmers are connected to the same self-return switch, long press the switch for 20 seconds until all lights reach 100% brightness. A maximum of 25 dimmers can be connected to one self-return switch, with a maximum connection cable length of 20m.

6.2 Tuya Smart App Control

The TRI-C1WR dimmer can be controlled via the Tuya Smart Life app. (Note: Does not support 5G WiFi routers).

  1. Download and Install App: Search for "Tuya Smart" in your device's app store (Apple App Store or Google Play Store) or scan the QR code below to download and install.
    Tuya Smart App interface and QR code for download. Shows features like timing, device sharing, and Tap-to-Run automation.
    Figure 4: Tuya Smart App interface and QR code for download. Shows features like timing, device sharing, and Tap-to-Run automation.
  2. Register/Log In: Open the app. If you're a new user, click "Register" to create an account. If you already have an account, log in directly.
  3. Network Configuration:
    • Connect the dimmer to the power supply.
    • Confirm the indicator light is flashing quickly (approximately 2 flashes per second). If not, you can make it flash quickly by:
      • Long pressing the "SET" key on the dimmer until the indicator flashes quickly.
      • Powering off and on the controller 6 times consecutively.
    • Ensure your phone is connected to a 2.4GHz WiFi network.
    • Open the app homepage and tap the "+" button in the upper right corner.
    • Select "Lighting" on the left side, then choose "Light Source (BLE+Wi-Fi)".
    • Follow the in-app prompts to complete the configuration.
  4. "Do Not Disturb" Mode: This mode is activated by default. To adjust this setting:
    • In the app, click on the light you wish to control.
    • Tap "More" (usually represented by three dots or a similar icon).
    • Select "Power-on behavior" to configure the dimmer's response after a power cycle or to disable "Do Not Disturb" mode.

6.3 Voice Control (Amazon Alexa / Google Assistant)

After successfully configuring the dimmer with the Tuya Smart app, you can link it to Amazon Alexa or Google Assistant for voice control.

6.3.1 Amazon Alexa Setup

  1. Open the Amazon Alexa app.
  2. Tap "More" (bottom right corner).
  3. Select "Skills & Games".
  4. Tap the search icon (magnifying glass) at the top right.
  5. Type "Smart life" into the search bar and press Enter.
  6. Select the "Smart Life" skill and follow the on-screen instructions to enable it and link your Tuya Smart account.
  7. Once linked, you can use voice commands like "Alexa, turn on/off [light name]" or "Alexa, set [light name] to 50%".

6.3.2 Google Assistant Setup

  1. Open the Google Home app.
  2. Tap the "+" icon (top left corner).
  3. Select "Set up device".
  4. Choose "Works with Google".
  5. Tap the search icon (magnifying glass) at the top right.
  6. Type "Smart life" into the search bar and press Enter.
  7. Select the "Smart Life" skill and follow the on-screen instructions to link your Tuya Smart account.
  8. Once linked, you can use voice commands like "Hey Google, turn on/off [light name]" or "Hey Google, dim [light name]".

7. 2.4G RF Remote Control

The TRI-C1WR dimmer is compatible with various Miboxer 2.4G RF remote controls (purchased separately), such as K1/K1-B rotating switch panel remotes.

Miboxer K1 Rotating Switch Panel Remote, front, back, and side views
Figure 5: Miboxer K1 Rotating Switch Panel Remote. The back shows linking/unlinking instructions.

The K1 remote features a magnetic back cover for easy mounting.

7.1 Linking Code Instructions

To link the dimmer with a 2.4G RF remote control:

  1. Ensure the dimmer is powered off for at least 10 seconds, then power it on.
  2. Within 3 seconds of powering on, either:
    • Short press the "Link" button on the dimmer module one time.
    • Or, short press the "I" button on your remote control three times.
  3. The connected light(s) will blink 3 times slowly, indicating successful linking.

Note: If linking fails (light does not blink slowly), repeat the steps. A light that has already been linked cannot be linked again to the same remote.

7.2 Unlinking Code Instructions

To unlink the dimmer from a 2.4G RF remote control:

  1. Ensure the dimmer is powered off for at least 10 seconds, then power it on.
  2. Within 3 seconds of powering on, either:
    • Short press the "Link" button on the dimmer module one time.
    • Or, short press the "I" button on your remote control five times.
  3. The connected light(s) will blink 10 times quickly, indicating successful unlinking.

Note: If unlinking fails (light does not blink quickly), repeat the steps. Lights that were not linked do not need to be unlinked.

7.3 Auto Transmitting Function

The controller features an auto transmitting function for its 2.4G RF signal. This means one controller can transmit the remote signal to another controller automatically. While the direct distance between controllers for this transmission is 30m, the overall remote control distance becomes unlimited as long as there are other linked controllers within range to relay the signal.

Attention: All controllers involved in auto transmitting must be linked with the same remote control.

8. User Tips

  • For best WiFi connectivity, ensure your router is set to 2.4GHz and the dimmer is within a reasonable range. Avoid placing the dimmer near large metal objects that could interfere with the signal.
  • When using the PUSH dimming feature, a quick press acts as an ON/OFF toggle, while a sustained press adjusts brightness. Experiment with the duration of your press to find the desired dimming level.
  • If you experience issues with voice control, double-check that your Tuya Smart Life account is correctly linked in both the Alexa and Google Home apps. Device names in the Tuya app should be simple and easy for voice assistants to recognize.
  • The "Do Not Disturb" mode in the Tuya app can prevent lights from turning on automatically after a power outage. If you prefer your lights to return to their previous state, adjust this setting in the app's "Power-on behavior" section.

9. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on/off or dim.No power to the dimmer; incorrect wiring; incompatible light source; dimmer malfunction.Check power supply. Verify wiring against the connection diagram. Ensure your light source is dimmable and compatible (Triac dimming LED, incandescent, halogen).
Dimmer indicator light not flashing quickly for network configuration.Dimmer is not in pairing mode.Long press the "SET" button on the dimmer, or power cycle the dimmer 6 times.
Cannot connect to Tuya Smart app.Incorrect WiFi frequency; weak WiFi signal; incorrect pairing steps.Ensure your phone is connected to a 2.4GHz WiFi network. Move closer to the router. Re-attempt network configuration steps carefully.
2.4G RF remote control not working.Remote not linked; battery low in remote; interference.Follow the linking instructions (Section 7.1). Replace remote battery if applicable. Ensure no strong electromagnetic interference nearby.
Voice control (Alexa/Google) not responding.Tuya Smart Life skill not enabled/linked; device name not recognized; internet connectivity issue.Verify the "Smart Life" skill is enabled and linked in your Alexa/Google Home app. Use simple device names. Check your internet connection.
Lights flicker or dim unevenly.Incompatible light source; minimum load not met; poor quality LED driver.Ensure your LED lamps are specifically "dimmable" and compatible with Triac dimmers. Some LED lamps require a minimum load to dim properly. Consider trying a different brand of dimmable LED.

10. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the dimmer. Do not use harsh chemicals or abrasive cleaners.
  • Environment: Ensure the dimmer is operated within its specified working temperature range (-10~40 °C) and away from excessive moisture.
  • Firmware Updates: Periodically check the Tuya Smart app for any available firmware updates for your dimmer to ensure optimal performance and security.

11. Warranty and Support

The Miboxer TRI-C1WR AC Triac Dimmer comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For detailed warranty terms, technical support, or further assistance, please refer to the official product documentation or contact the seller/manufacturer directly. A comprehensive user manual in PDF format may also be available for download: Miboxer TRI-C1WR User Manual (PDF).

12. Frequently Asked Questions (FAQ)

Q: Can I use this dimmer with any LED light?
A: No, this is a Triac dimmer. It is compatible with dimmable LED lamps that are specifically designed for Triac (leading edge or trailing edge) dimming. It also works with traditional incandescent and halogen lamps.
Q: Do I need a hub for this dimmer?
A: No, the dimmer has built-in WiFi for direct connection to your 2.4GHz home network, allowing control via the Tuya Smart Life app without a separate hub. For 2.4G RF remote control, the remote acts as the controller.
Q: What if my WiFi router is 5GHz?
A: The dimmer only supports 2.4GHz WiFi networks. Most modern routers are dual-band and broadcast both 2.4GHz and 5GHz signals. Ensure your phone is connected to the 2.4GHz network during setup.
Q: How many remotes can control one dimmer?
A: Multiple 2.4G RF remotes can be linked to a single dimmer. Refer to the linking instructions in Section 7.1 for each remote.
Q: What is the "Do Not Disturb" mode?
A: This mode, when enabled, prevents the light from turning on automatically after a power outage or when power is restored. It requires two consecutive power cycles to turn the light on. You can adjust this setting in the Tuya Smart app under "Power-on behavior".
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.