Introduction
Thank you for purchasing the ETENWOLF AIR 5 Electric Air Pump. This manual provides essential information for the safe and efficient operation of your device. Please read all instructions and safety warnings carefully before use to ensure maximum performance and security.
Product Overview
Familiarize yourself with the components of your ETENWOLF AIR 5 pump:

Image: ETENWOLF AIR 5 pump with included nozzles.
- Hanging Ring: For easy portability and attachment.
- Deflation Port: Used for deflating items.
- Start/Pause Power Button: Controls the pump's operation.
- Battery Indicator: Shows the current battery level.
- Light Button: (Available on Pro Max models) Activates the camping light.
- Type-C Charging Port: For charging the device.
- Camping Light: Provides illumination.
- Inflation Port: Used for inflating items.
- Lampshade: Diffuses the camping light for softer illumination.
Setup and First Use
Inflation
- Select the appropriate nozzle for your inflatable item.
- Attach the selected nozzle clockwise onto the Inflation Port.
- Long-press the Start/Pause Power Button for 2 seconds to activate the pump.
- Connect the nozzle firmly to the item you wish to inflate.
- Press the Start/Pause Power Button once to begin inflation.
- To stop inflation, press the Start/Pause Power Button again.
Note: The air pump requires manual stopping; it does not stop automatically. Always check the allowable pressure for your inflatable item to prevent overinflation, which can lead to damage or explosion.
Deflation
- Select the appropriate nozzle.
- Attach the selected nozzle clockwise onto the Deflation Port.
- Long-press the Start/Pause Power Button for 2 seconds to activate the pump.
- Connect the nozzle firmly to the item you wish to deflate.
- Press the Start/Pause Power Button once to begin deflation.
- To stop deflation, press the Start/Pause Power Button again.
Note: The air pump requires manual stopping; it does not stop automatically.
Nozzle Usage
The ETENWOLF AIR 5 comes with multiple nozzles to fit various inflatable items:

Image: ETENWOLF AIR 5 pump demonstrating various usage scenarios.
- Air Mattress/Floating Bed/Air Pillow: Use the wider, tapered nozzles for larger valve openings.
- Vacuum Storage Bag: Use the cylindrical nozzle for vacuum sealing bags.
- Swimming Ring/Inflatable Toy: Use the smaller, pointed nozzles for standard toy valves.
Operating Instructions
Inflation and Deflation Control
- Turn On: Long-press the Power Button for 2 seconds.
- High Speed Operation: Press the Power Button once after turning on. (Flow: 26 CFM / 720 Liters per Minute)
- Low Speed Operation: Within the first 5 seconds of high-speed operation, press the Power Button a second time. (Flow: 16 CFM / 450 Liters per Minute)
- Stop Operation: Press the Power Button a third time. If the high-speed fan has been operating for more than 5 seconds, pressing the Power Button will stop the operation immediately.
- Turn Off: In any operating state, long-press the Power Button for 2 seconds to turn off the device, including the LED light.
Camping Light (Pro Max Models Only)
To use the integrated camping light:
- Ensure the pump is activated (turned on).
- Press the Light Button to cycle through the light modes:
- Level 1: 120 lumens (approx. 80 hours duration on full charge)
- Level 2: 400 lumens (approx. 20 hours duration on full charge)
- Level 3: 1200 lumens (approx. 6 hours duration on full charge)
- Strobe Light
- SOS Signal
Lampshade Use: To soften the light, stop any inflation or deflation process, then place the lampshade over the inflation port. Do not operate inflation or deflation with the lampshade attached.
Maintenance
Battery Charging
To charge your ETENWOLF AIR 5 pump:
- Use a certified charger that provides 5V and a maximum charging current of 3A (5V/3A).
- Connect the Type-C charging cable to the pump's Type-C Charging Port and to the charger.

Image: Battery life comparison highlighting the 5200mAh capacity of AIR 5.
Battery Indicator Status:
- 0-10% Charge: Orange flashing
- 10-30% Charge: Orange solid
- 30-100% Charge: White solid
While Charging:
- 0-99% Charged: White flashing
- 100% Full Charge: White solid
Battery Capacity:
- AIR 5: 5200mAh x 3.7V (19.2Wh)
- AIR 5 Pro Max: 10400mAh x 3.7V (38.5Wh)
Charging Time:
- AIR 5: Approximately 2 hours (with 5V/3A charger)
- AIR 5 Pro Max: Approximately 4 hours (with 5V/3A charger)
Storage and General Care
- Store the pump in a cool, dry place away from direct sunlight.
- To maintain optimal battery performance, charge the device at least once every six months, even if not in use.
- Keep the vent holes clear of any obstructions.
- Clean the exterior of the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
Troubleshooting
- Red Flashing Light: This indicates a high temperature warning or overload. Check the vent holes for any blockages and ensure the pump is not being overused. Allow the device to cool down before resuming operation.
- Pump Not Charging: Ensure you are using a compatible 5V/3A charger and a functional Type-C cable. Check the charging port for any debris.
- Pump Not Turning On: Ensure the battery is sufficiently charged. If the battery is low, charge the device fully.
Specifications
| Feature | ETENWOLF AIR 5 / AIR 5 Pro Max |
|---|---|
| Dimensions | 2.8 inches x 2.4 inches x 4.1 inches |
| Pressure | High speed flow: 0.65PSI/4.5kPa Low speed flow: 0.5PSI/3.5kPa |
| Inflation/Deflation Speed | High speed flow: 26CFM/720LM Low speed flow: 16CFM/450LM |
| Battery Capacity | AIR 5: 5,200mAh AIR 5 Pro Max: 10,400mAh |
| Charging Time | AIR 5: 2 hours (5V/3A) AIR 5 Pro Max: 4 hours (5V/3A) |
| Operating Temperature | Charging: 0°C-45°C / 30°F-113°F Operating: -20°C~70°C / -4°F~158°F |
| Storage Temperature | -20°C~60°C / -4°F~140°F |
| Brightness of Light | 120 lumens (80 hours) 400 lumens (20 hours) 1200 lumens (6 hours) |
User Tips
No specific user tips were available from provided data. Always ensure the correct nozzle is used for a secure fit to maximize inflation/deflation efficiency.
Warranty and Support
2-Years Coverage
ETENWOLF provides a 2-year warranty from the date of purchase. During this period, we will offer timely and effective online after-sale service, including repair or replacement of any defective product due to manufacturing faults.
Contact Information
For any questions, comments, or support needs, please contact us:
- Phone: (+1) 866-720-9226 (Mon-Fri 8 am-5 pm PST)
- Email: support@etenwolf.com
- Website: https://etenwolf.com
- Facebook: www.facebook.com/etenwolftools
Manufacturer: Guangdong Bestek Technology Co., Ltd
Brand Owner: Mozhen Technology (Shenzhen) Co., LTD
Safety Instructions
- Adult Use Only: This appliance is intended for adult use.
- Charger: Use only a compatible charger (5V/3A).
- Water Exposure: Do not drop the unit into water or expose it to rain or other liquids. This product is not waterproof; do not immerse it.
- Ventilation: Do not obstruct vent holes or any open sources. Ensure proper airflow during operation.
- Foreign Objects: Do not insert objects into the inflation or deflation connectors.
- Children: This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction by a responsible person. Children should be supervised to ensure they do not play with the appliance.
- Battery Care: Charge the device at least once every six months to maintain battery performance.
- Overinflation: Always check the maximum allowable pressure for your inflatable item to prevent overinflation, which can cause damage or explosion.