1. Introduction
The ONERugged P10J is a robust 10-inch industrial panel PC designed for demanding environments. It features a touch screen display, supports both Windows 11 and Linux operating systems, and is built to withstand harsh conditions with its IP65-rated front panel and wide operating temperature range. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your P10J device.

2. Safety Information
- Always use the provided power adapter or a compatible power source that meets the device's specifications.
- Do not expose the device to extreme temperatures outside its specified operating range (-20°C to 60°C) or to excessive humidity.
- Ensure proper ventilation around the device, especially if it is enclosed, to prevent overheating.
- Avoid dropping or subjecting the device to severe impacts, despite its rugged design.
- Disconnect power before cleaning or performing any maintenance.
- Refer to local regulations for proper disposal of electronic waste.
3. Product Overview
The P10J is a fanless panel PC designed for continuous operation in industrial settings. Its robust construction and comprehensive I/O options make it suitable for a wide range of applications.
3.1 Physical Features


3.2 I/O Ports and Controls
The P10J offers a comprehensive set of industrial I/O ports for versatile connectivity:

- COM1, COM2: RS232 serial ports for industrial communication.
- LINE IN, LINE OUT: Audio input and output jacks.
- USB1, USB2: USB 2.0 ports.
- USB3, USB4: USB 3.0 ports.
- LAN1, LAN2: Dual 1000M Gigabit Ethernet ports.
- HDMI: HDMI display output.
- DC IN: Power input (12V/4A).
- Power On/Off: Power button.
- WiFi Antenna, 4G Antenna: Connectors for optional wireless antennas.
4. Setup and Installation
4.1 Initial Power-Up
- Connect the provided power adapter to the DC IN port on the rear of the P10J.
- Plug the power adapter into a suitable power outlet.
- Press the Power On/Off button to turn on the device.
- The system will boot up, and the operating system (Windows 11 or Linux) will load.
4.2 Wall Mounting
The P10J is designed for easy installation with standard PPC mounting hook components. Refer to the dimensional drawing for mounting hole locations and sizes.

The rear of the device includes VESA mounting points (75mm x 75mm and 100mm x 100mm) for flexible installation options.
5. Operating Instructions
5.1 Touch Screen Operation
The 10.1-inch PCAP (Projected Capacitive) touch panel supports 10-point multi-touch gestures, making it intuitive for data entry, image manipulation (rotate, drag, drop), and zooming with two or more fingers. The G+G (Glass+Glass) construction ensures durability and responsiveness.

5.2 Operating System
The P10J supports Windows 11 Home/Pro and Linux, offering flexibility for various industrial applications. Familiarize yourself with the chosen operating system's interface and functionalities.
5.3 Performance and Connectivity
Powered by an 11th generation Intel Celeron N5100 processor, the P10J delivers efficient computing performance. It includes 8GB of DDR4 memory and supports 128GB storage, expandable via HDD. Optional 4G, dual-frequency WiFi, and Bluetooth 5.0 provide robust connectivity.

6. Maintenance and Care
6.1 Cleaning
- The P10J's front panel is IP65 rated, offering protection against dust and water ingress.
- To clean the screen, use a soft, lint-free cloth slightly dampened with water or a screen cleaner. Avoid harsh chemicals.
- For the device body, wipe with a dry or slightly damp cloth. Ensure no liquid enters any ports.
6.2 Fanless Design
The fanless design of the P10J utilizes passive cooling technology, ensuring silent operation and reducing maintenance needs by eliminating moving parts that can accumulate dust or fail.

6.3 Battery Safety
The P10J incorporates Emdoor Battery Safety features, including a battery protection board with independent voltage detection, overcharge protection, overdischarge protection, overcurrent protection, and short circuit protection. This enhances the longevity and safety of the battery.

7. Troubleshooting
7.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | No power, faulty adapter, loose connection | Check power cable and adapter connection. Ensure power outlet is functional. Try a different power adapter if available. |
| Touch screen unresponsive | Software glitch, driver issue, physical damage | Restart the device. Check for OS updates or touch screen driver updates. If issue persists, contact support. |
| No display output | Loose display cable (if external), OS display settings | Ensure the device is powered on. If using an external display, check HDMI cable connection. Adjust display settings in the OS. |
| Network connectivity issues | Loose Ethernet cable, Wi-Fi disabled, driver issue | Check Ethernet cable connection. Ensure Wi-Fi is enabled and connected to the correct network. Update network drivers. |
8. Specifications
The ONERugged P10J is engineered for high performance and reliability in industrial settings.
| Feature | Specification |
|---|---|
| Products Status | Stock |
| Type | Panel PC |
| Brand Name | ONERugged |
| Place of Origin | Guangdong, China |
| CPU | N5100 Processor (11th Gen Intel Celeron, 10nm, Quad-core, Four threads, Turbo Boost up to 2.8GHz) |
| Operating System | Win 11 Home/ Win 11 Pro / Linux |
| Display Type | 10.1 inch LCD, 1280*800 resolution, 700nit brightness |
| Touch Panel | 10 PCAP, G+G |
| Memory | 8GB DDR4 |
| Storage | 128GB (expandable via HDD) |
| Dimension | 257.2*170*45.95mm |
| Internet | Optional 4G / Dual frequency WIFI / BT5.0 |
| I/O Ports | 2x USB 3.0, 2x USB 2.0, 2x Gigabit Ethernet (LAN1, LAN2), 2x RS232 (COM1, COM2), 1x HDMI, 1x Power Port, 1x Headphone Jack |
| Certification | Front panel IP65, CCC, FC, CE, UL, HDMI, RoHS, MIL-STD 810H/G, IP67, IP68, MSDS, CB, UN38.3, IEC 62133 |
| Working Temperature | -20 °C to 60 °C |
| Power Supply | 100-240V (wide voltage design), 12V/4A input |
| OEM/Customization | Acceptable |


9. User Tips
- Optimize for Environment: Given its wide operating temperature range, ensure the device is installed in a location that maximizes its passive cooling capabilities, even though it's designed for harsh environments.
- Regular Software Updates: Keep your chosen operating system (Windows or Linux) and drivers updated to ensure optimal performance and security.
- Backup Data: Regularly back up important data, especially in industrial settings where data integrity is crucial.
- Utilize Customization: If your application requires specific features, explore the available OEM/ODM customization options for hardware, software, and modules to tailor the P10J to your exact needs.
10. Warranty and Support
ONERugged provides a one-year warranty for the P10J Industrial Panel PC. We also offer permanent technical support to assist with any issues or questions you may have regarding your device.
For technical assistance, troubleshooting, or warranty claims, please contact ONERugged customer support through the official channels provided at the time of purchase or on the ONERugged website.