ULTIMEA Poseidon D80

Contents

ULTIMEA Poseidon D80 7.1 Surround Soundbar User Manual

Model No.: U2620

Introduction

Thank you for choosing the ULTIMEA Poseidon D80 7.1 Surround Soundbar. This manual provides essential information for setting up, operating, and maintaining your home theater system. Please read it carefully to ensure optimal performance and safety.

ULTIMEA Poseidon D80 7.1 Surround Soundbar system components
Figure 1: ULTIMEA Poseidon D80 7.1 Surround Soundbar system components, including soundbar, wireless subwoofer, and four surround speakers.

Safety Instructions

Please read these safety instructions carefully before using the product and save them for future reference. Unauthorized alterations may compromise safety and void the warranty.

  • Avoid dropping the device.
  • Do not disassemble the product.
  • Do not submerge the device in water.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Use only original or certified cables.
  • Do not place dangerous items (e.g., liquid-filled objects, lit candles) on top of this device.
  • Clean with a dry, soft, lint-free cloth. Do not use corrosive cleaners or oil.
  • To avoid hearing damage, do not listen for extended periods at high volume.
  • Do not expose batteries to extreme heat sources such as direct sunlight or open flames.
  • The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
  • The adapter should be installed near the device and be easily accessible.
  • Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

Proper Disposal Instructions

This mark indicates that the product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.

Package Contents

Carefully unpack the box and ensure all the following items are included:

  • Subwoofer
  • Soundbar
  • Surround Speaker × 4
  • Power Adaptor
  • Subwoofer Power Cable
  • Stereo 3.5mm to RCA Audio Cable
  • Front Left Surround Cable (3m)
  • Front Right Surround Cable (3m)
  • Rear Left Surround Cable (6m)
  • Rear Right Surround Cable (6m)
  • HDMI Cable
  • Digital Optical Cable
  • Remote Control
  • Wall Mounted Kit
  • Wall Bracket
  • Mounting Screw on Speakers
  • User Manual (this document)

Setup and Installation

1. Connecting to TV via HDMI eARC / ARC

  1. Connect one end of the HDMI cable to the eARC/ARC port on your TV.
  2. Then connect the other end to the eARC port of the soundbar.
  3. Press the "eARC" button on the remote control to select "eARC" input.

Note: Make sure your TV HDMI supports eARC, otherwise the Dolby Atmos audio signal cannot be transmitted. For Dolby Atmos format, set your TV's audio output to 'Pass Through'. For DTS format, set your TV's audio output to 'PCM'. Please turn on the "CEC" function on your TV. When eARC/ARC is connected, your TV remote can control the soundbar and TV simultaneously (Turn on/off, Adjust volume).

HDMI eARC/ARC connection diagram
Figure 2: Diagram illustrating HDMI eARC/ARC connection from TV to soundbar.

2. Connecting to Other Devices via HDMI IN

  1. Connect the HDMI Cable to the HDMI OUT (ARC) port on the Soundbar and the other end to the eARC / ARC port on the TV.
  2. Connect the HDMI cable to the HDMI OUT port on the other device (such as DVD or game console) and the other end to HDMI IN port on the Soundbar.
  3. Press the "Source" button on Soundbar or Remote Control to switch to HDMI IN channel.

Note: Your TV HDMI needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.

HDMI IN connection diagram
Figure 3: Diagram illustrating HDMI IN connection for external devices.

3. Connecting to TV via Optical / AUX

Optical Connection:

  1. Ensure the TV's port is OPTICAL OUT. Connect both sides of the optical cable to the OPTICAL ports on both the TV and the soundbar.
  2. Ensure the optical plug is inserted correctly. Do not insert upside down to avoid damage.

Note: If audio is playing from internal TV speakers, mute or minimize the TV volume. If no sound in Optical Mode, try setting TV audio output to PCM.

AUX Connection:

  1. Connect the 3.5mm to RCA audio cable to your TV's RCA AUDIO OUT port.
  2. Ensure the color of the cable ends matches the color of the TV ports.

Note: Unplug the AUX cable from TV and Soundbar when switching modes.

Optical and AUX connection diagram
Figure 4: Diagram showing Optical and AUX connection options.

4. Connecting to Bluetooth®

  1. Press the "Bluetooth" button on the soundbar or remote control to enter Bluetooth pairing mode.
  2. Open your phone's Bluetooth settings, find and select "Poseidon D80" to connect the soundbar.

Note: If already connected, press and hold the Bluetooth button for 3 seconds to disconnect the current device and connect to a new device manually.

5. Connecting Surround Speakers and Subwoofer

The ULTIMEA Poseidon D80 system includes a soundbar, a wireless subwoofer, and four surround speakers (two front, two rear) to create a 7.1 channel Dolby Atmos experience.

7.1 Channel Dolby Atmos Soundbar speaker placement diagram
Figure 5: Diagram showing the recommended placement of the 7.1 Channel Dolby Atmos Soundbar, 6.5" Wireless Subwoofer, and Front/Rear Surround Speakers (SL, SR, FL, FR).
  1. Front Surround Speakers (FL & FR): Use the provided Front Surround Cables (3m) to connect the soundbar to the front left (FL) and front right (FR) surround speakers. Match the color interfaces on the speakers with the corresponding ones on the soundbar.
  2. Rear Surround Speakers (SL & SR): Use the provided Rear Surround Cables (6m) to connect the subwoofer to the rear left (SL) and rear right (SR) surround speakers. Match the color interfaces on the speakers with the corresponding ones on the subwoofer.

Note: When facing the front of the soundbar, the two right surround satellite speakers will have red interfaces, while the two left surround satellite speakers will have white interfaces. Position them accordingly for an optimal audio experience.

Surround speaker wiring diagram
Figure 6: Detailed wiring diagram for connecting surround speakers to the soundbar and subwoofer.

6. Pairing Subwoofer

The subwoofer is pre-paired with the soundbar from the factory. If there is no sound from the subwoofer, you may need to re-pair it:

  1. Press and hold the "SUB PAIR" button on the remote control for 3 seconds. The display will show "SUB" flashing.
  2. Press and hold the ON/OFF button on the subwoofer for 5 seconds. The white LED will flash quickly. The white LED will be solid when successfully paired.
Subwoofer pairing instructions diagram
Figure 7: Visual guide for subwoofer pairing process.

7. Placement Recommendation

For the best listening experience, arrange the entire system as shown in the diagram below, ensuring the soundbar is centered with your TV, front speakers are near the TV, and rear speakers are positioned behind the listening area.

Full 360 degree surround sound placement recommendation
Figure 8: Recommended full 360-degree surround sound system placement for optimal audio.

8. Wall Mount Installation

The wall mount bracket for the surround speakers is identical to that of the soundbar. The vertical hole spacing is the same, and the installation method is also the same.

Wall mount installation diagram for soundbar and speakers
Figure 9: Step-by-step diagram for wall mounting the soundbar and surround speakers.

Operating Instructions

1. Soundbar Control Panel

The soundbar features a top-mounted control panel for easy access to basic functions:

  • Power Button (①): Press to power on/off.
  • Source Button (②): Press to switch between input channels: eARC-HD IN (HDMI IN)-OPT (OPTICAL)-BT-AUX-USB.
  • Bluetooth Button (③): Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and manually connect to a new device.
  • Volume Down (④): Decrease volume.
  • Volume Up (⑤): Increase volume.

2. Remote Control Functions

The included remote control provides comprehensive control over your soundbar system:

Remote control layout with button descriptions
Figure 10: Remote control layout with detailed button functions.
  • Power Button (①): Power on/off.
  • eARC (②): Switch to HDMI eARC channel.
  • HD IN (③): Switch to HDMI IN channel.
  • OPT (④): Switch to OPTICAL channel.
  • AUX (⑤): Switch to AUX channel.
  • BT (⑥): Switch to BLUETOOTH channel.
  • USB (⑦): Switch to USB channel.
  • SUB PAIR (⑧): Hold for 3s to pair soundbar with subwoofer.
  • USB REPEAT (⑨): USB mode: Switch between single loop and list loop playback.
  • Volume Up (+) (⑩): Increase volume.
  • Volume Down (-) (⑪): Decrease volume.
  • Previous (<) (⑫): Skip to previous track (BT and USB modes only).
  • Next (>) (⑬): Skip to next track (BT and USB modes only).
  • Play/Pause (⑭): Play/Pause (BT and USB modes only).
  • MUTE (⑮): Mute/unmute audio.
  • LED DIMMER (⑯): Adjust display brightness (5 levels). Hold for 3s to turn off LED display.
  • BASS MX (⑰): Adjust bass level (display shows "B5-6" to "B5 6").
  • MIDRANGE (⑱): Adjust alto level (display shows "MR-6" to "MR 6").
  • TREBLE (⑲): Adjust treble level (display shows "TB-6" to "TB 6").
  • MOVIE (⑳): Switch to MOVIE mode (display shows "MOVI").
  • MUSIC (⑴): Switch to MUSIC mode (display shows "MUSC").
  • VOICE (⑵): Switch to VOICE mode (display shows "VOIC").
  • SPORT (⑶): Switch to SPORT mode (display shows "SPRT").
  • GAME (⑷): Switch to GAME mode (display shows "GAME").
  • NIGHT (⑸): Switch to NIGHT mode (display shows "NIGT").
  • SURROUND (⑹): Adjust surround sound level (display shows "SR-6" to "SR 6").
  • PROMPT TONE (⑺): Adjust prompt tone level (display shows "PT 0" to "PT 3").

3. Smart APP Control

The ULTIMEA Poseidon D80 can be controlled via a dedicated smartphone application, offering advanced customization options.

  • Download the App: Scan the QR code provided in the manual or search for "ULTIMEA" on Google Play or Apple App Store.
  • 10-band Equalizer Settings: Customize your audio experience with precise control over different frequency ranges.
  • 121 Preset EQ Matrices: Swipe to customize your style with a wide range of preset equalizer options (Bass, Rock, Popular, Classical).
  • 6 Tailored EQ Modes: Select from optimized modes for Movie, Music, Voice, Sport, Game, and Night.
  • OTA Supported: The app supports Over-The-Air firmware upgrades to keep your soundbar updated with the latest features and improvements.
  • One-click Connection: Easily connect your device via Bluetooth through the app.
Video 1: Product demonstration showcasing sound projection, Dolby Atmos immersion, smart app control with EQ settings, and one-click Bluetooth connection.

Maintenance

To ensure the longevity and optimal performance of your ULTIMEA Poseidon D80 soundbar system, follow these simple maintenance guidelines:

  • Cleaning: Use a dry, soft, lint-free cloth to clean the surfaces of the soundbar, subwoofer, and speakers. Avoid using abrasive cleaners, waxes, or solvents as they can damage the finish.
  • Ventilation: Ensure that the soundbar and subwoofer have adequate ventilation. Do not block any ventilation openings. Avoid placing the units in enclosed spaces like bookshelves or cabinets without proper airflow.
  • Environment: Keep the system away from direct sunlight, heat sources, and moisture. Avoid extreme temperatures and humid environments.
  • Cable Management: Periodically check all cables for any signs of wear or damage. Ensure cables are not pinched or tangled, which could affect performance or safety.
  • Firmware Updates: Regularly check for and install firmware updates via the ULTIMEA app to ensure your system has the latest features and bug fixes.

Troubleshooting

If you encounter any issues with your ULTIMEA Poseidon D80, refer to the following common problems and solutions:

  • No Sound:
    • Check all cable connections (HDMI, Optical, AUX) to ensure they are secure.
    • Verify the correct input source is selected on the soundbar and TV.
    • Ensure the TV's audio output settings are correctly configured (e.g., Pass Through for Dolby Atmos, PCM for DTS, or appropriate digital audio output).
    • Check if the soundbar or TV is muted or volume is too low.
  • Subwoofer Not Producing Sound:
    • Ensure the subwoofer is powered on and its power cable is securely connected.
    • Re-pair the subwoofer with the soundbar as described in the "Pairing Subwoofer" section.
  • Surround Speakers Not Working:
    • Verify that the surround speakers are correctly wired to the soundbar and subwoofer, matching the color interfaces.
    • Check the surround sound level settings using the remote control.
  • Bluetooth Pairing Issues:
    • Ensure the soundbar is in Bluetooth pairing mode.
    • Disconnect any previously paired devices by holding the Bluetooth button for 3 seconds.
    • Make sure your device's Bluetooth is enabled and within range.
  • Remote Control Not Working:
    • Check if the batteries are correctly inserted and not depleted. Replace if necessary.
    • Ensure there are no obstructions between the remote and the soundbar.
  • Distorted Sound:
    • Reduce the volume to see if distortion decreases.
    • Check audio source quality.
    • Adjust EQ settings (Bass, Midrange, Treble) to find a balanced sound.

User Tips

  • For an immersive movie experience, especially with Dolby Surround/Atmos content, ensure your TV's audio output is set to 'Pass Through' or 'Bitstream' for the best results.
  • Utilize the ULTIMEA app for fine-tuning the sound. The 10-band equalizer and 121 preset EQ matrices allow for personalized audio profiles for different content types (movies, music, games).
  • Experiment with speaker placement, especially the rear surround speakers, to achieve the most impactful surround sound. Even small adjustments can significantly enhance the audio field.
  • When connecting to a PC, remember to download the Dolby Lab app on your operating system to enable Dolby Atmos sound output for games and other media.
  • If you live in an apartment, be mindful of the powerful bass from the 6.5" wireless subwoofer. It can be very loud even at 40% volume.

Specifications

FeatureSpecification
Model NumberU2620
Power SupplyAC 100-240V, ~50/60Hz
Soundbar Drivers2.25" x 3 (Soundbar) + 2.25" x 4 (Surround Speaker) + 6.5" (Subwoofer)
Frequency Response35Hz - 18kHz
Standby Power<0.5W
Operating Temperature-10°C - 45°C / 14°F - 113°F
Dimensions and Weight
Soundbar400 (W) x 70 (H) x 90 (D)mm (15.7" x 2.8" x 3.5")
Subwoofer185 (W) x 288 (H) x 260 (D)mm (7.3" x 11.3" x 10.2")
Surround Speaker135 (W) x 70 (H) x 90 (D)mm (5.3" x 2.8" x 3.5")
Packaging476 (W) x 338 (H) x 346 (D)mm (18.7" x 13.3" x 13.6")
Net Weight7.9kg / 17.4lb
Gross Weight10.4kg / 22.9lb

Support

If you require assistance or have any questions regarding your ULTIMEA Poseidon D80, please contact our support team:

You can also find more information and download the ULTIMEA app by scanning the QR code or searching for "ULTIMEA" on Google Play or Apple App Store.

For the full Declaration of Conformity and trademark information, please refer to the official user manual PDF: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.