1. Introduction
This manual provides detailed instructions for the Hantek PC USB Oscilloscope series, including models 6254BC, 6074BC, 6104BC, and 6204BC. These devices are designed to offer high-performance waveform analysis capabilities comparable to traditional benchtop oscilloscopes, with the added convenience of a USB interface for PC integration. Key features include a 1GSa/s real-time sampling rate, up to 250MHz bandwidth, and advanced waveform processing functions.

Figure 1: Hantek PC USB Oscilloscope in use with a tablet displaying waveforms.
2. Setup
2.1. Package Contents
Before proceeding, ensure all items are present in your package:
- Hantek PC USB Oscilloscope unit
- 2 Passive Probes
- 2 Gator Clip Lines
- USB Cable
- Software CD (or download link)

Figure 2: Hantek PC USB Oscilloscope product packaging.
2.2. Hardware Connection
- Connect to PC: Use the provided USB cable to connect the oscilloscope to an available USB 2.0 port on your computer. The device is plug-and-play.
- Connect Probes: Attach the passive probes or gator clip lines to the BNC connectors on the front panel of the oscilloscope. Ensure a secure connection.

Figure 3: Front panel with BNC connectors.
2.3. Software Installation
The Hantek oscilloscope requires dedicated software to operate. The software supports Windows 7, Windows 8, and Windows 10.
- Insert the provided software CD into your computer's optical drive, or download the latest software version from the official Hantek website.
- Follow the on-screen instructions to install the software and necessary drivers.
- Once installation is complete, launch the Hantek oscilloscope application.
3. Operating Instructions
The Hantek PC USB Oscilloscope features an intuitive operation interface similar to traditional benchtop oscilloscopes, making it easy to use for both beginners and experienced users.
3.1. Basic Waveform Display and Control
Upon launching the software, you will see a waveform display area. You can adjust various parameters to view and analyze signals:
- Vertical Scale (Volts/Div): Adjust the vertical sensitivity for each channel (2mV/div to 10V/div).
- Horizontal Scale (Time/Div): Control the time base range (2ns/div to 1000s/div).
- Channel Selection: Enable or disable channels (CH1, CH2, CH3, CH4) as needed.
3.2. Trigger Functions
Triggering stabilizes repetitive waveforms and captures single-shot events. The oscilloscope supports the following trigger modes:
- Edge Trigger: Triggers on a rising or falling edge of a signal.
- Pulse Trigger: Triggers on pulses of specific width.
- Video Trigger: Triggers on video signals.
- Alternative Trigger: Allows triggering on multiple channels simultaneously.
Trigger sources can be selected from CH1, CH2, CH3, or CH4.
3.3. Measurement Functions
The device offers extensive measurement capabilities:
- Automatic Measurements: Over 20 types, including Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, and Duty Cycle.
- Cursor Measurements: Use cross, trace, horizontal, and vertical cursors for precise manual measurements.
3.4. Waveform Processing and Analysis
Advanced processing features enhance waveform analysis:
- Mathematical Operations: Add, subtract, multiply, divide waveforms.
- FFT Spectrum Analyzer: Perform Fast Fourier Transform to analyze signal frequency components.
- Invert: Invert selected waveforms.
- Averaging: Reduce random noise in repetitive signals.
- Afterglow & Lightness Control: Adjust waveform display persistence and brightness.
- X-Y Display: View Lissajous figures for phase and frequency comparisons.
3.5. Data Management
- Waveform Record and Replay: Capture and review transient events.
- Data Export: Export waveform data to EXCEL, BMP, or JPG formats for further analysis or documentation.
3.6. Advanced Features
- Serial Bus Triggering and Decode: Analyze bus protocol information, displayed intuitively in table form.
- Multi-Oscilloscope Connection: Connect multiple Hantek oscilloscopes to a single computer to easily expand the number of available channels.
- USBXI Standard Interface: Designed for integration into USBXI cases for assembling custom instrumentation.
- Secondary Development: A DLL library and development examples for Labview, VB, and VC are provided for custom applications.
Video 1: Overview of Hantek oscilloscope series and accessories.
4. Maintenance
4.1. General Care
- Keep the oscilloscope clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Store the device in a safe place when not in use, preferably in its original packaging or a protective case.
4.2. Probe Care
- Handle probes carefully to avoid bending or damaging the tips.
- Ensure probe connections are clean and secure.
5. Troubleshooting
If you encounter issues with your Hantek PC USB Oscilloscope, consider the following common solutions:
- No Signal Display: Check all cable connections, especially the USB cable to the PC and probes to the device/circuit. Ensure the software is running and the correct channels are enabled.
- Software Not Recognizing Device: Verify that the USB drivers are correctly installed. Try connecting to a different USB port or restarting your computer.
- Unstable Waveform: Adjust the trigger settings (mode, source, level) to stabilize the waveform.
- Software Crashes: Ensure your operating system is up to date and that you are using the latest version of the Hantek software.
6. Specifications
The following table details the specifications for the Hantek PC USB Oscilloscope models:
| Parameter | Hantek6074BC | Hantek6104BC | Hantek6204BC | Hantek6254BC |
|---|---|---|---|---|
| Bandwidth | 70MHz | 100MHz | 200MHz | 250MHz |
| Channel | 4 CH | |||
| Real-time Sampling Rate | 1GSa/s | |||
| Memory Depth | 64K | |||
| Time Base Precision | ±50ppm | |||
| Time Base Range | 2ns/div-1000s/div (1-2-4 sequences) | |||
| Input Impedance | 1MΩ 25pF | |||
| Input Sensitivity | 2mV/div~10V/div | |||
| Vertical Resolution | 8Bit | |||
| Vertical Displacement Range | 2mV~10V/div@x1 probe; 20mV~100V/div@x10 probe; 200mV~1000V/div@x100 probe; 2V~10000V/div@x1000 probe | |||
| DC Gain Accuracy | ±3% | |||
| Bandwidth (Filter) | 20MHz | |||
| Trigger Mode | Edge, Pulse, Video, Alternative | |||
| Trigger Source | CH1, CH2, CH3, CH4 | |||
| Waveform Signal Process | +,-,x,÷,FFT, Invert | |||
| Cursors Measurement | Cross, Trace, Horizontal, Vertical | |||
| Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle | |||
| Dimensions (L*W*H) | 175mm * 105mm * 25mm | |||
| Weight | 0.9kg | |||
| Accessories | 2 passive probes, 2 gator clip lines | |||
7. Warranty and Support
7.1. After-Sell Service Policy
- All delivered products are 100% tested before shipping to ensure full functionality.
- In case of missing or defective parts, please notify us no later than 5 days after receiving the item for re-shipment arrangements.
- After-sell service is provided within 1 year of purchase. For eligible service, the seller will bear the one-way freight cost from China to your location.
7.2. Contact Information
For technical support or service inquiries, please contact your vendor or refer to the official Hantek website for support resources.