HYULIGHTS HYU-200PS

Contents

HYULIGHTS 300W LED RGBW Strobe & Beam Light User Manual

Model: HYU-200PS | Brand: HYULIGHTS

1. Introduction & Package Contents

Thank you for choosing this professional moving head light. You have acquired a powerful and versatile device designed for stage lighting effects.

Upon unpacking, please ensure all items listed below are present:

  • One (1) Power Cable
  • One (1) User Manual (this document)
  • One (1) Light Unit
  • One (1) DMX Cable
  • One (1) Bow Mount and two (2) Screws
Product package contents including light unit, cables, manual, and mounting hardware.
Figure 1: Package Contents

2. Safety Information

Please read and understand all safety instructions before installation and operation. Keep this manual for future reference.

  • This device is intended for professional stage and DJ use.
  • Ensure the power source matches the specified voltage (110V~240V, 50-60HZ) to prevent damage.
  • Do not open the device. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Avoid direct eye exposure to the light source, as it can cause eye injury.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Mount the device securely using the provided bow mount and screws.
  • Keep away from moisture and extreme temperatures. This product is generally intended for indoor use unless an IP rating for outdoor use is explicitly stated.

3. Setup

3.1 Mounting

The light unit features a self-contained installation method with an adjustable bow mount. Securely attach the bow mount to a stable surface or truss using appropriate clamps and safety cables (not included) to prevent accidental falls.

3.2 Power Connection

Connect the provided power cable to the 'POWER IN' port on the rear panel of the light unit. Ensure the power source is within the 110V~240V, 50-60HZ range. Use the 'POWER OUT' port to daisy-chain power to other compatible units if needed.

3.3 DMX Connection

For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the 'DMX IN' port on the light unit. To control multiple units, connect the 'DMX OUT' of the first unit to the 'DMX IN' of the next unit in the chain.

Rear panel diagram showing Power In/Out, DMX In/Out, and control buttons.
Figure 2: Rear Panel Connections and Controls

4. Operating Instructions

The light unit can be operated in several modes: Auto, Sound-activated, DMX, and Master/Slave. Use the 'DISPLAY SCREEN' and control buttons (MENU, UP, DOWN, ENTER) on the rear panel to navigate settings.

4.1 Control Modes

  • Auto Mode: The unit cycles through its built-in 67 automatic effect modes.
  • Sound Mode: The light reacts to music or sound via an internal microphone, utilizing 5 built-in sound modes.
  • DMX Mode: Provides precise control over light functions (color, dimmer, strobe, beam effects) using a DMX controller. The unit supports 5, 10, or 112 DMX channels.
  • Master/Slave Mode: Link multiple units together. One unit acts as the master, controlling all other slave units.

4.2 Key Features

  • Color: Offers 16.7 million kinds of color changes with RGB 3-in-1 LEDs.
  • Dimmer: Smooth 0-100% electronic dimming for precise light intensity control.
  • Strobe: Capable of 30 flashes per second in any color.
  • Beam Angle: Features a 3-degree beam angle for focused light projection.
Video 1: Product demonstration showcasing various light effects and control options.

5. User Tips

  • Beam Concentration: Be aware that the light produces a very concentrated beam. While versatile, it may not be ideal for wide-area strobe or wash effects if a broad spread is desired.
  • DMX Control: For advanced control and synchronization with other stage equipment, utilizing DMX mode is highly recommended. Consult the DMX channel chart (if provided in the full PDF manual) for specific channel assignments.
  • Outdoor Use: The product's specifications do not include an IP rating for outdoor use. It is generally recommended for indoor environments to prevent damage from weather exposure.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your light unit.

  • Cleaning: Periodically clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
  • Ventilation: Ensure the cooling fan and ventilation openings are free from dust and debris. Blocked vents can lead to overheating.
  • Inspection: Regularly check all cables and connections for signs of wear or damage. Replace any damaged components immediately.
  • Storage: When not in use, store the light in a dry, dust-free environment.

7. Troubleshooting

If you encounter issues with your light unit, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on No power, faulty cable, internal fuse blown Check power connection, test cable, contact support for fuse replacement
No DMX control Incorrect DMX address, faulty DMX cable, DMX controller issue Verify DMX address, check DMX cable, test controller with another device
Light flickers or behaves erratically Loose connection, power fluctuations, DMX signal interference Check all connections, ensure stable power, use DMX terminator
Overheating Blocked ventilation, prolonged use in high ambient temperature Clear vents, ensure adequate airflow, allow unit to cool down

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

Attribute Value
Brand NameHYULIGHTS
Model NumberHYU-200PS
Item TypeStage Lighting Effect
OccasionProfessional Stage & DJ
Voltage90-240V (110V~240V, 50-60HZ)
Power (W)350W (Consumption power: 300W)
LED384pcs SMD5050 RGB 3in1 0.3W LED + 256pcs White 0.2W LED, 24pcs 5W White Beam Effect
Luminous Flux>82000
Channel5/10/112 Channel
Beam angle3 angle
Strobe30 Flashes per second (any color)
Dimmer0-100% smooth dimming
DMX3-pin XLR input/output
Control modeAuto, Sound, DMX, Master/Slave
Machine housing materialsAluminum case
Cover painting wayElectrostatic powder painting
FeaturesBuilt-in 5 SOUND modes, 67 Auto effect modes.
N.W3.8kg
G.W4.65kg
Product Size45x26x11cm
Package Size48x30x17cm
Is Bulbs IncludedYes
Power SourceAC
Hign-concerned ChemicalNone
Installation Methodself-contained
CertificationCE, FCC, RoHS, WEEE, NONE
OriginMainland China

9. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the official user manual PDF or contact the seller directly. The comprehensive user manual (PDF) can be accessed here.

10. Frequently Asked Questions (FAQ)

Q: Are these lights suitable for outdoor use?
A: The product specifications do not mention an IP rating for outdoor use. It is generally recommended to use these lights in indoor environments to protect them from weather conditions.
Q: How does DMX control work?
A: DMX (Digital Multiplex) control allows you to precisely manage various aspects of the light, such as color, dimming, and strobe effects, using an external DMX controller. You connect the DMX controller to the light's 'DMX IN' port using a 3-pin XLR cable. Each light unit is assigned a unique DMX address, allowing the controller to send specific commands to individual or groups of lights. For detailed DMX channel assignments, please refer to the full user manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.