1. Product Overview
The METALFISH DH380 is a compact, low-profile CPU cooler designed for mini-ITX and other small form factor PC builds. It features 4 heat pipes and a 38mm height, providing efficient cooling for CPUs with up to 120W TDP.

Figure 1: METALFISH DH380 V4 CPU Cooler overview, highlighting 4 heat pipes, 38mm height, 120W TDP, and compatibility with various Intel and AMD sockets.

Figure 2: Diagram illustrating the direct contact technology of the heat pipes with the CPU for efficient heat transfer.
2. Package Contents
Please check the package for the following items:
- CPU Cooler (Heatsink and Fan assembly)
- AMD Mounting Bracket
- Intel Mounting Bracket
- Fixed Nuts (4x)
- Screws
- Insulation Pads (4x)
- Thermal Grease (Syringe)

Figure 3: Visual representation of the cooler parts and included accessories.
3. Installation Guide
3.1. AMD Platform Installation
- Accessories Display: Identify AMD socket bracket (A), fixed nut (B), screw (C), insulation pad (D), and thermal grease (E).
- Step 1: Prepare Nuts: Stick the black insulation pads onto the 4 fixed nuts.
- Step 2: Install Bracket: Install the AMD socket bracket onto the radiator.
- Step 3: Prepare Motherboard: Remove the original AMD bracket from the motherboard. Keep the original backplate of the motherboard.
- Step 4: Apply Thermal Grease: Clean the top of the CPU thoroughly. Apply a thin, even layer of the provided thermal grease onto the CPU surface.
- Step 5: Adjust Screws: Adjust the screw positions on the bracket according to your motherboard's installation holes.
- Step 6: Secure Cooler: From the back of the motherboard, use the fixed nuts with insulation pads to secure the cooler firmly.
- Step 7: Connect Fan: Connect the 4-pin fan connector to the CPU_FAN header on your motherboard. If applicable, connect the ARGB connector to the 5V+3pin ARGB header.

Figure 4: Step-by-step visual guide for installing the cooler on an AMD platform.
3.2. Intel Platform Installation
- Accessories Display: Identify Intel socket bracket (A), fixed nut (B), screw (C), insulation pad (D), and thermal grease (E).
- Step 1: Prepare Nuts: Stick the black insulation pads onto the 4 fixed nuts.
- Step 2: Install Bracket: Install the Intel socket bracket onto the radiator.
- Step 3: Apply Thermal Grease: Clean the top of the CPU thoroughly. Apply a thin, even layer of the provided thermal grease onto the CPU surface.
- Step 4: Adjust Screws: Adjust the screw positions on the bracket according to your motherboard's installation holes.
- Step 5: Secure Cooler: From the back of the motherboard, use the fixed nuts with insulation pads to secure the cooler firmly.
- Step 6: Connect Fan: Connect the 4-pin fan connector to the CPU_FAN header on your motherboard. If applicable, connect the ARGB connector to the 5V+3pin ARGB header.

Figure 5: Step-by-step visual guide for installing the cooler on an Intel platform.
4. Operating Instructions
Once installed, the METALFISH DH380 CPU cooler will automatically regulate its fan speed based on CPU temperature, thanks to its 4-pin PWM connection. Modern motherboards and operating systems typically manage this automatically.
- BIOS/UEFI Settings: You can fine-tune fan curves and monitoring settings in your motherboard's BIOS/UEFI to optimize for acoustics or cooling performance.
- Temperature Monitoring: Use system monitoring software (e.g., HWMonitor, Core Temp, or your motherboard's utility) to keep an eye on your CPU temperatures, especially during heavy loads, to ensure optimal performance and stability.
- Airflow: Ensure adequate airflow within your PC case, particularly in compact builds, to allow the cooler to dissipate heat effectively.
5. Maintenance
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your CPU cooler.
- Dust Removal: Periodically (every 3-6 months, or more often in dusty environments) use compressed air to blow dust out of the heatsink fins and fan blades. Ensure the fan is held still while blowing air to prevent over-spinning and potential damage.
- Thermal Paste Check: If CPU temperatures rise significantly over time, consider reapplying thermal paste. This typically involves removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying a fresh layer.
- Fan Inspection: Check the fan for any obstructions or unusual noises. Ensure the fan cable is securely connected.
6. Troubleshooting
- High CPU Temperatures:
- Ensure the cooler is securely mounted and making proper contact with the CPU.
- Verify that thermal paste was applied correctly and evenly.
- Check for adequate airflow within your PC case.
- Ensure the fan is spinning.
- Excessive Fan Noise:
- Check if the fan is securely mounted and not vibrating against other components.
- Adjust fan speed settings in your motherboard's BIOS/UEFI to a quieter profile if temperatures allow.
- Ensure no cables are interfering with the fan blades.
- Fan Not Spinning:
- Verify the 4-pin fan connector is securely plugged into the CPU_FAN header on the motherboard.
- Check BIOS/UEFI settings to ensure the fan is enabled and not set to a 0 RPM mode at low temperatures if you expect it to spin constantly.
7. Specifications

Figure 6: Detailed specifications for the METALFISH DH380 V4 CPU Cooler.
| Feature | Specification |
|---|---|
| Model Number | DH380 |
| Cooler Type | Low Profile |
| Cooler Size | 110*92*38 mm |
| Fan Size | 92*92*15 mm |
| Heat Pipes | 4 heat pipes, Ø6mm |
| Bearing Type | Hydraulic / Fluid Bearing |
| Fan Speed | 900 - 2800 RPM ±10% |
| Fan Airflow | 12.59 - 38.9 CFM ±10% |
| Air Pressure | 2.19 mmH2O |
| Noise Level | 18 - 28 dBA ±10% |
| Power Interface | 4PIN PWM |
| Fan Voltage | 12V |
| TDP | 120W (D-TDP) |
| Fan Life | 50,000 hrs |
| Blade Quantity | 9 |
| Supported CPU Sockets | Intel: LGA 755, 1150, 1151, 1155, 1156, 1700, 1851, 1200, 1356, 1366, 2011, 2066 AMD: Socket FM1, FM2, AM3, AM5, AM2, AM2+, FM2+, AM3+, FM2/FM2+, AM4 |
| Certification | CE, FCC, RoHS |
8. User Tips
- Ideal for Mini PCs: This cooler is highly recommended for mini-ITX and other small form factor PC builds due to its compact size.
- Fan Noise: If fan noise is a concern, some users have found success replacing the stock fan with a quieter 92mm fan.
- Airflow Direction: Experiment with fan orientation; some users report better performance when the fan airflow is directed towards the CPU.
- CPU Undervolting: For users with compatible CPUs, undervolting can help reduce heat generation, allowing the cooler to operate more quietly and efficiently.
- Monitor Temperatures: Always monitor CPU temperatures after installation and during heavy loads to ensure stable operation.
9. Warranty and Support
For warranty claims, technical support, or further inquiries, please contact the original seller or METALFISH customer service. Keep your proof of purchase for warranty validation.
For a more detailed guide and additional information, you may refer to the official user manual PDF: METALFISH DH380 User Manual (PDF)