1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANZHLE 13-inch Curved Screen Head Unit for Land Rover Defender L663 models (2020-2024). This advanced infotainment system is designed to seamlessly integrate with your vehicle, retaining all original OEM functions while upgrading your driving experience with a larger, high-resolution touch screen.
Key features include a 13-inch display with 1920*1080 HD resolution, full touch capabilities, support for original car functions (like 4x4 info, seat massage), and plug-and-play installation.
2. Safety Information
- Voltage Range: This product operates within a voltage range of 9V-16V. Exceeding this range can cause severe damage to the unit or prevent it from functioning. Ensure your vehicle's electrical system is within this specification.
- Professional Installation: While designed for plug-and-play, professional installation is highly recommended due to the need for specific automotive knowledge and careful wiring connections. Improper installation can lead to damage to the unit or vehicle.
- Wiring: Always ensure correct wiring connections as described in the installation section. Incorrect wiring can cause electrical shorts or damage.
- Vehicle Operation: Do not operate the screen or its functions in a way that distracts you from driving. Always prioritize road safety.
3. Package Contents
Please check the box for the following items:
- 1 x 13-inch Curved Screen Head Unit (Main Unit)
- 1 x Power Cord
- 1 x Speaker Adapter Cable
Image: Main unit, power cord, and speaker adapter cable.
4. Setup and Installation
The ANZHLE head unit is designed for plug-and-play installation, but professional assistance is highly recommended.
4.1. Pre-Installation Checks
- Vehicle Compatibility: This unit is compatible with Land Rover Defender 90/110/130 L663 models from 2020-2024.
- Original Screen Size: Identify your original car's screen size (10-inch or 11.4-inch) to ensure proper fitment. Both left-hand and right-hand drive models can be upgraded.
- Professional Help: If you lack automotive installation experience, seek a professional car repair shop for installation.
- Included Cables: All necessary cables for installation are included with the product.
Image: Diagram showing original 10-inch and 11.4-inch central control units. Ensure you select the correct unit for your vehicle's year and original screen size.
4.2. Wiring Instructions
- GND (Black Wire): Connect the black wire to the negative terminal of the car battery or a reliable ground point on the vehicle chassis.
- ACC (Red Wire): Connect the red wire to an ACC (Accessory) power source. You can test for an ACC source in your fuse box using a multimeter: it should show 0V when the ignition is off and 12V when the ignition is on. If no ACC is found in the fuse box, locate another suitable ACC power source.
- Power Cord: Connect the main power cord to the designated port on the back of the head unit.
- Speaker Adapter Cable: Connect the speaker adapter cable to integrate with your car's audio system.
Note: The unit is designed to be plug-and-play, meaning it connects to existing vehicle harnesses without cutting original wires.
4.3. Installation Steps (General Overview)
The installation typically involves removing the original screen and trim, connecting the new head unit, and securing it in place. Refer to the provided diagrams for visual guidance.
Image: Installation effect diagram showing the screen in various operational modes.
Video: Product demonstration showing UI navigation, Apple CarPlay, and 360-degree camera view.
5. Operating Instructions
5.1. Basic Navigation
- Swipe Left/Right: On the main interface, swipe left or right to cycle through different displays such as the clock, and compass interfaces.
- Up/Down Controls: On the compass interface, tap the up or down areas to switch between different seasonal background images (spring, summer, autumn, winter).
- Touchscreen: Navigate through menus and applications by tapping icons and swiping as you would on a smartphone.
5.2. Key Features and Functions
- OEM System Retention: The unit fully retains all original car functions, including the original camera display, 4x4 information, vehicle settings, and more.
- Apple CarPlay & Android Auto: Connect your smartphone via a wired connection to access navigation, music, calls, and other apps directly on the screen.
- Vehicle Information Display: Access real-time vehicle data such as 4x4 status, air quality, and other diagnostic information.
- Seat Massage Function: If your original car supports it, the unit will display and allow control of the seat massage function.
- Multimedia Playback: Supports various digital media formats including MP3, MP4, JPEG, and CD playback (if applicable to original system).
- Steering Wheel Control: Fully compatible with your vehicle's original steering wheel controls for safe and convenient operation.
- Reversing Input: Supports original factory rear view camera or 360-degree camera systems.
- Split Screen Display: Allows two applications to be displayed simultaneously on the screen.
Image: Screen displaying vehicle 4x4 information, demonstrating OEM function retention.
Image: Screen displaying controls for the original car's seat massage function.
6. Maintenance
- Screen Cleaning: Use a soft, lint-free cloth, slightly dampened with water or a screen cleaner, to gently wipe the display. Avoid abrasive materials or harsh chemicals.
- Software Updates: Periodically check with ANZHLE support for any available software updates to ensure optimal performance and access to new features.
- Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold for prolonged periods, as this can affect its performance and lifespan.
7. Troubleshooting
- Unit Does Not Power On:
- Check all power connections (GND, ACC) to ensure they are secure and correctly wired.
- Verify that the vehicle's voltage is within the 9V-16V operating range.
- Check relevant fuses in your vehicle.
- No Sound:
- Ensure the speaker adapter cable is correctly connected.
- Check the volume settings on the head unit and your vehicle's audio system.
- Touchscreen Unresponsive:
- Try restarting the vehicle (turning off and on).
- Ensure the screen is clean and free from debris.
- Original Functions Not Working:
- Verify all harnesses are properly connected to the original vehicle system.
- Ensure the correct unit variant was installed for your specific Defender model and original screen size.
- Other Issues: For any other problems, please refer to the Warranty and Support section to contact customer service.
8. Specifications
| Display Size | 13.3 inches |
| Resolution | 1920*1080 |
| Display Type | IPS, OGS Fully Fit, AG Etching Anti-Glare, AR Anti-Reflection |
| Touch Screen | Yes |
| Din Size | One Din |
| Operating Voltage | 12 V (9V-16V range) |
| Item Weight | 3 kg |
| Package Dimensions | 37 cm (L) x 26 cm (W) x 16 cm (H) |
| Special Features | Built-In Speaker/Microphone, Steering Wheel Control, Can-Bus Support, MP3 Players, Reversing Input |
| Digital Media Format | CD, MP3, MP4, JPEG |
| Material | Plastic + Hardware |
| Certifications | CE, FCC, RoHS |
Image: Visual comparison highlighting the 1920*1080 Ultra-Clear IPS display quality.
Image: Diagram explaining OGS Fully Fit technology with AG etching anti-glare and AR anti-reflection layers.
9. User Tips
- Confirm Car Model: Before purchasing and installing, double-check your Land Rover Defender's exact model year and original screen size to ensure you receive the correct unit.
- Contact Support: If you encounter any issues during installation or operation, do not hesitate to contact ANZHLE customer support. They are known for being patient and helpful in resolving problems.
- Screen Quality: The 1920*1080 Ultra-Clear IPS display with OGS Fully Fit technology provides excellent clarity and vibrant colors, enhancing your in-car experience.
- No Programming Needed: The unit is designed to integrate with and retain your vehicle's OEM systems, so additional programming is typically not required.
10. Warranty and Support
10.1. Warranty Period
The product comes with a 12-month (365 days) free repair warranty from the date of receipt for any malfunctions under normal use. After 12 months, repair services will still be provided, but charges for repairs will apply.
10.2. Warranty Exclusions
The warranty will be void under the following conditions:
- Damage or failure due to improper operation or installation not guided by ANZHLE.
- Repairs, adjustments, or modifications performed by unauthorized service centers.
- Use of non-original or incompatible accessories.
- Damage caused by natural disasters (e.g., earthquake, fire, lightning, flood).
- Damage occurring during product shipment for repair.
- Any product or component not sold by ANZHLE.
- Damage caused by human factors (e.g., physical damage, misuse).
- Damage or malfunction due to computer virus infection or use of self-written/third-party software.
- Beyond the warranty period.
Image: Detailed warranty terms and conditions.
10.3. Customer Support
For technical support, warranty claims, or any inquiries, please contact ANZHLE customer service:
- 24-Hour Service Hotlines: +86 188 1435 7086, +86 176 6548 7753
- Manufacturer: XZX VideoTechnology (Shenzhen) Co.,Ltd
11. Frequently Asked Questions (FAQ)
Q: Do I need to program the unit after installation?
A: No, the ANZHLE head unit is designed to integrate seamlessly with your Land Rover Defender's existing OEM systems and functions. It typically does not require any additional programming.
Q: What is the screen quality like?
A: The screen features a 13.3-inch 1920*1080 Ultra-Clear IPS display. It utilizes OGS Fully Fit technology, AG etching anti-glare, and AR anti-reflection layers to provide exceptional clarity, vibrant colors, and a comfortable viewing experience.
Q: Is professional installation required?
A: While the product is designed for plug-and-play, professional installation is highly recommended. This ensures correct wiring, proper fitment, and avoids potential damage to the unit or your vehicle, especially if you are not familiar with automotive electronics.