CYCLAMI CYC1800

Contents

CYCLAMI CYC1800 Wireless Remote Hoisting Bike Headlight User Manual

Introduction

Thank you for choosing the CYCLAMI CYC1800 Wireless Remote Hoisting Bike Headlight. This manual provides essential information for the safe and efficient use of your new headlight. Please read it thoroughly before use and keep it for future reference.

CYCLAMI CYC1800 Headlight mounted on a bicycle handlebar

Image: The CYCLAMI CYC1800 Headlight securely mounted beneath a bicycle's handlebar, showcasing its compact design and forward-facing illumination.

Package Contents

Please check the package to ensure all items are present:

  • 1 x CYC1800 Headlight
  • 1 x Wireless Remote Control
  • 1 x GoPro Bracket (for mounting)
  • 1 x TYPE-C Charging Cable
  • 1 x Quick Release Lifting Head Mount
Contents of the product package

Image: A visual representation of all components included in the CYCLAMI CYC1800 package: the headlight, remote control, Type-C USB cable, and quick release mount.

Setup Instructions

1. Initial Charging

Before first use, fully charge the headlight to ensure optimal performance. Connect the supplied TYPE-C charging cable to the headlight's charging port and to a USB power source. The button will light red during charging and turn green when fully charged.

2. Headlight Installation

  1. Attach the GoPro bracket to your bicycle's extension bracket or a compatible mount point.
  2. Slide the CYC1800 Headlight into the GoPro bracket until it clicks securely into place. The quick-release design allows for easy attachment and detachment without tools.
Hand detaching the headlight from its mount

Image: A hand demonstrating the quick disassembly feature, easily detaching the headlight from its mount.

3. Remote Control Installation

  1. Attach the strap bracket to the wireless remote control.
  2. Securely install the remote control onto your bicycle handlebar in a position that is easily accessible while riding.
Close-up of the wireless remote control mounted on a handlebar

Image: A close-up view of the compact wireless remote control, securely strapped to a bicycle handlebar, showing its ON/OFF and MODE buttons.

4. Remote Control Pairing

The remote control must be paired with the headlight before first use:

  1. Long press the headlight button for 3 seconds. The headlight indicator light will begin to breathe and blink, indicating it is in code pairing mode.
  2. Bring the remote control close to the headlight.
  3. Press any key on the remote control. The headlight indicator will flash rapidly for approximately 1 second.
  4. The code pairing is complete when the rapid flashing ends.

Operating Instructions

1. Headlight Button Operation

The headlight features 6 light modes: Low, Medium, High, Ultra, Strobe, and SOS.

  • Power On/Off: Press and hold the headlight button for 1 second.
  • Change Modes: After powering on, click the headlight button to cycle through modes: Ultra → High → Medium → Low.
  • Blinking Modes (Strobe/SOS): Double-click the headlight button to enter blinking mode. Once in blinking mode, click the headlight button again to switch between SOS and Strobe modes.
  • Mode Memory: The headlight automatically retains the last used light mode when it is turned off and then turned back on.

2. Remote Control Operation

  • ON/OFF Button: Tap to turn the headlight on or off.
  • MODE Button:
    • Single Click: Switches between Ultra, High, Medium, and Low brightness modes.
    • Double Click: Enters blinking mode (Strobe/SOS). While in blinking mode, a single click will switch between SOS and Strobe.
  • Reconnection: If the remote control is not used for a long time, it may disconnect from the headlight. To reconnect, long press the ON/OFF button on the remote control to wake it up and re-establish the connection.

3. Battery Level Indicator

When the headlight is in standby mode, tap the light switch button to check the battery level:

  • Green Light: Approximately 10% to 100% battery remaining.
  • Red Light: Approximately 0% to 10% battery remaining.
Bicycle headlight illuminating a dark road ahead

Image: The powerful beam of the CYC1800 headlight cutting through darkness, illuminating a road up to 200 meters ahead.

Cyclist riding at night with the 1800 lumens headlight

Image: A cyclist riding at night, clearly visible with the bright, wide beam of the 1800 lumens headlight illuminating the path.

Maintenance and Care

Charging

Recharge the headlight using the provided TYPE-C USB cable. The indicator light will be red during charging and turn green when fully charged.

Cleaning

Wipe the headlight with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.

Water Resistance

The CYC1800 headlight is rated IPX4 waterproof, meaning it is resistant to splashing water from any direction. It is suitable for riding in rainy conditions but should not be submerged in water.

Bicycle with the headlight on, riding in the rain

Image: A bicycle with its headlight on, riding through a rainy environment, demonstrating the IPX4 waterproof and weather-resistant capabilities.

Storage

Store the headlight in a cool, dry place when not in use. If storing for an extended period, charge the battery periodically to maintain its health.

Troubleshooting

  • Headlight does not turn on: Ensure the battery is charged. If it has been stored for a long time, a full charge may be required.
  • Remote control not responding: Check if the remote control needs to be reconnected (long press ON/OFF button on remote). Ensure it is within close proximity to the headlight.
  • Headlight gets warm during use: It is normal for the lamp head to generate heat after extended periods of illumination, especially on higher brightness settings.

Specifications

FeatureSpecification
Model NumberCYC1800
Max Lumens1800 Lm
Light ModesLow, Medium, High, Ultra, Strobe, SOS (6 modes)
Battery Capacity4000mAh
Battery LifeApprox. 3.5 - 12 hours (depending on mode)
Body MaterialAluminum alloy + Nylon
Waterproof LevelIPX4
Dimensions68 x 53 x 45.5 mm
Weight185g
Charging PortType-C USB
Mounting PlacementHandlebar
CertificationCE, RoHS
Intelligent SensingYes

User Tips

  • Remote Control Convenience: Many users find the remote control highly practical for changing light modes without removing hands from the handlebars. Remember to pair it before first use.
  • Brightness and Range: The 1800 lumens provide excellent illumination, with a reported range of up to 200 meters, making it suitable for various riding conditions.
  • Battery Life Variability: While rated for up to 12 hours, actual battery life on the highest settings is typically around 3-4 hours. Adjusting brightness levels can significantly extend runtime.
  • Mount Stability: The mounting system is generally stable, even on rough roads. However, some users have noted that the base might not fit all handlebar diameters, so check compatibility if you have non-standard bars.
  • Charging While Operating: Some users have successfully operated the light while connected to an external power bank, which can extend usage time for longer rides.

Frequently Asked Questions (FAQ)

Q: How do I synchronize the remote control with the lamp?
A: Long press the headlight button for 3 seconds until it blinks, then press any button on the remote control while holding it close to the headlight. The headlight will flash to confirm pairing.
Q: What is the battery life when fully charged?
A: Battery life varies by mode. It can last from approximately 3.5 hours on Ultra mode up to 12 hours on Low mode. Actual usage may vary.
Q: Does it work while charging from a power bank?
A: Yes, some users have reported that the headlight can operate while connected to an external power bank, allowing for extended runtime.
Q: Can it be used without the remote control?
A: Yes, the headlight can be fully operated using the button on the unit itself. It also has a memory function that retains the last brightness setting.
Q: What is the weight of the headlight?
A: The headlight weighs approximately 185 grams.

Warranty and Support

CYCLAMI products come with a 1-year after-sales warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Damages caused by misuse, accidents, or unauthorized modifications are not covered.

For warranty claims, technical support, or product inquiries, please contact us:

After the 1-year warranty period, maintenance services may be available for a charge covering parts and transportation costs.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.