1. Safety Information
Important Safety Warnings:
- To avert fire, electric shock, and potentially dangerous situations, leave servicing and installation to only qualified personnel.
- Use only in cars with a 12-volt negative ground. Ensure the unit is grounded to a negative 12V DC power supply. Do not connect the unit to DC 24V.
- If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you might cause a short circuit, which could potentially start a fire. Always connect those wires to the power source running through the fuse box.
- For safety, make sure to insulate any loose wires with electrical tape.
- Using the head unit for a long time with the engine off can drain the battery.
- Do not watch or fix your gaze on the unit's display whilst driving for any extended period. Do not listen to loud music whilst driving. Excessive volume levels that mask sounds such as emergency vehicle sirens or road warning signals can be dangerous and may lead to an accident.
- Do not install the unit in a spot exposed to humidity or water.
- Never leave any metal items (like coins or metal tools) or liquid inside the unit. If this occurs, turn off the car ignition to prevent short circuits or fire and consult your mechanic or XTRONS customer support.
- If you hear strange noises, smell strange odours, and/or detect smoke from the product, immediately turn the car ignition off and unplug the product to avoid short circuits or fire, and consult your mechanic or XTRONS customer support.
- Do not disassemble or modify the product in any way. Doing so may result in fire. If you experience problems during installation, consult your mechanic or XTRONS customer support.
- Do not block vents or heat dissipation panels. Doing so may cause heat to build up inside and may result in fire.
- Please bear in mind that whilst the navigation system / parking / reversing sensors are designed to make your driving simpler and safer, they do not replace the driver's attention and judgement. The driver always has the responsibility to ensure the car is being driven safely, at a suitable speed, maintaining a proper distance from other vehicles, and in line with the current traffic rules and regulations.
- Please keep the manual in a secure location, near the product for future reference.
2. Setup and Installation
2.1 Package Contents
Before beginning installation, please verify that all components are present in your package:
- 1 x Radio Antenna Cable
- 1 x 4G Antenna
- 1 x GPS Antenna
- 1 x SIM Card Slot Cable
- 1 x ISO Wiring Harness
- 2 x USB Cables
- 1 x Camera Cable
- 1 x Microphone
- 2 x Fitting Kits
- 1 x CANBus Box
- 1 x Radio Cable Adapter
- 1 x User Manual (PDF available online)
Description: This image provides the physical dimensions of the head unit (157x178x50mm, 286mm width) and details the accessories included in the package, such as antennas, wiring harnesses, USB cables, microphone, CANBus box, fitting kits, and user manual.
2.2 Vehicle Compatibility
This XTRONS car radio is designed for BMW X5 E53 models manufactured between 1999 and 2006.
Description: This image confirms compatibility with BMW X5 E53 models from 1999 to 2006 and provides an important note regarding the removal of the existing frame in the center console for proper installation.
Important Notes on Compatibility:
- Please check whether there is a frame in the center console of your car. If there is one, please remove the frame first to finish the installation.
- If your car's original radio antenna port is not standard, you may need to order two extension cables (XTRONS ISOZF and FZMF).
- If your car's original radio is 4.3" or 7" screen with 12 pins plug, or you have the navigation drive located in the rear of your car, you need to order an extra 6m extension cable to aid for the installation. (XTRONS EXL005 and EXL007 are compatible).
- Connect the blue plug in XTRONS ISO wiring harness ONLY if there is a blue 12-pin plug in your car's dash.
- If there is a DSP (Digital Sound Processing) button in your factory radio, or your car has a digital sound system like 'Harman Kardon', you need to order an extension cable to aid for the installation. (XTRONS EXL007 is compatible).
- For cars with Logic7 system or the factory car radio has fiber optic input WITHOUT 8 speaker wires, an extra decoder will be needed to retain the factory amplifier and resolve "NO SOUND" issues. (XTRONS FOBB05 is compatible).
2.3 Wiring Harness Diagram
Refer to the following diagrams for proper wiring connections for both Double Din and Single Din units.
Description: Detailed wiring diagrams for both Double Din and Single Din configurations, outlining RCA and power connections.
Description: This section details various optional cables that might be required for installation, depending on the car's original setup, such as radio antenna cables, ISO wiring harnesses, and DSP adapters.
Wiring Diagram Key:
- 4G Antenna
- GPS Antenna
- Radio Antenna Port
- 4G SIM Card Slot
- Microphone Port
- CVBS-IN-2, Front Camera Input
- SUBWOOFER, Subwoofer Output
- AUX IN L, Audio Input Left
- AUDIO OUT L, Audio Output Left
- 2176, Amplifier Control Cable
- AUX IN R, Audio Input Right
- AUDIO OUT R, Audio Output Right
- CVBS-IN-1, Video Input1
- RR OUT, Rear Right Audio Output
- RL OUT, Rear Left Audio Output
- BRAKE, Brake In Cable
- Back, Reversing Control Cable
- BT-ANT, Bluetooth Antenna
- Wi-Fi Antenna
- CAM IN, Camera Video Input
- USB Port1
- USB Port2
- USB Port3
- CANBus Box
- ACC
- ACC
- CAM 12V+, Camera Power Cable 12v
- BRAKE, Brake-in Cable
- KEY1, Steering Wheel Control Key1
- KEY2, Steering Wheel Control Key2
- ISO Wiring Harness 1
- ISO Wiring Harness 2
- ISO Wiring Harness 3
3. Operating Instructions
3.1 Basic Operations
The Android system allows the user to operate the unit with the touchscreen. Slide a finger across the screen for the desired action. Spread the finger to zoom in (available only on certain apps like Chrome or Book Reader), pinch your finger to zoom out. You can change the position of the icons and widgets by holding your finger in one spot until the unit performs the desired action.
Main Screen Introduction
Description: An explanation of the main screen interface and the functions of its various icons.
- Home
- Time
- Volume
- Screenshot
- Screen Off
- Recent Apps
- Back
- Navigation
- Zlink
- Bluetooth
- Radio
- Settings
- Time & Navigation with Speed (Click to switch between Km/h and mph)
- Music
- Radio
Touch Screen Gestures
Description: Instructions on how to interact with the touchscreen using various gestures like clicking, dragging, and zooming.
- Clicking Function: Select an application icon or option on the screen.
- Dragging Function: Drag the touch screen or press the scroll bar for up and down operation. For example, browse your contact list on Bluetooth-enabled phones.
- Zooming Function: When browsing the web, click the screen twice to zoom in or out. Alternatively, use two fingers to pinch to zoom.
Change Launcher
To switch the UI, follow these steps:
- Navigate to the "Theme" in the Home Screen.
- Select one of the available theme options and press "INSTALL".
Description: Steps to change the user interface launcher, offering multiple theme options.
Note: For devices with rotating screens, there is only one set of UI available.
3.2 Functions
Radio
- Radio Region Setting: If your radio is set to a different region/country, you can change it in Settings > Radio > Radio area.
- Enter Radio Mode: Touch the Radio icon in the APPs menu.
- Search Radio Manually: Touch < or > to change frequencies. Press < or > to automatically find the nearest working frequency.
- Auto Search: Press the search icon for automatic search from low to high frequency. The radio app will find and save the strongest signals.
- Save Station: To manually save a station, find the desired frequency and press and hold a number button for 2 seconds.
- AF (Alternative Frequencies): Automatically selects the best frequency for the set radio station (for FM radio).
- TP (Traffic Program) / TA (Traffic Announcement): TP finds stations broadcasting traffic bulletins; TA interrupts current audio to play traffic announcements.
- PTY (Program Type): Scan for pre-defined program types like rock, news, jazz.
- Band: Choose between different FM and AM bands.
- ST (Stereo/Mono): Choose between Mono and Stereo FM reception. Switching to mono can improve reception for unstable signals.
- LOC (Local/Distance): Allows receiving only close-range and local signals. DX (default) receives both foreign and local stations.
Description: Details on setting radio regions, accessing radio mode, and manually searching for stations.
Description: Further radio functionalities such as auto-search, traffic program announcements, program type selection, and local/distance signal settings.
Navigation
- Navigation Setup: Press the Setting icon, select "Navi" to find the Navi Setting.
- Online Maps: Google Maps is preinstalled. Download online maps when connected to the internet.
- Offline Maps: Save specific areas from Google Maps for offline use or download 'HERE WE GO' offline maps from Google Play.
- GPS Maps Card: Purchase a GPS card with maps and install it via SD card (if available).
Description: Instructions for setting up navigation, using online and offline maps, and installing GPS map cards.
Description: Describes the advanced GPS navigation system, offering precise positioning and compatibility with popular navigation applications.
Bluetooth
- Bluetooth Setup: Press the BT icon to enter the Bluetooth menu. Configure Device Name, Pair Password, Auto Answer, and Auto Connect.
- Bluetooth Connection: Turn on Bluetooth on your phone, touch the device name to connect. Use the fast switch icon to reconnect/disconnect.
- Hands-Free: Make calls, delete entries, and manage the microphone.
- Phone Book: Make calls, delete contacts, and transfer phone book data from your smartphone.
- Call History: View answered, missed, and dialed calls.
- Bluetooth Music: Play music from your phone via Bluetooth.
Description: Steps to set up Bluetooth, including pairing devices and configuring auto-connect and auto-answer features.
Description: Instructions for connecting Bluetooth devices and a safety warning against operating the unit while driving.
Description: Explains hands-free calling features, including making calls, deleting entries, and managing the microphone.
Description: Details on managing contacts within the phone book, including transferring data from a smartphone.
Description: Explains how to view and manage call history, including answered, missed, and dialed calls.
Description: Instructions for playing music via Bluetooth and a note about potential signal interruptions during phone use.
Split Screen
The split-screen feature allows you to use two apps side-by-side. To use:
- Click the split-screen icon from the status bar.
- Click the app icon above the app you wish to use, and from the dropdown menu, choose "Split screen".
- Tap another app you want to use simultaneously.
Description: Explains the split-screen feature for multitasking with two applications simultaneously.
Note: Split screen functionality is not available on devices with 5-inch and 6.2-inch screens. Functionality varies across applications.
Internet (4G & Wi-Fi)
- Wi-Fi Connection: From Home screen, go to Settings > Network > More > Network & internet > Internet. Toggle Wi-Fi on and select your network.
- 4G Connection: Turn off the machine. Insert a Micro-SIM card (15mm*12mm) into the SIM card slot. Ensure correct direction. Turn on the machine and check for signal.
Description: Steps to access the internet via Wi-Fi, detailing network settings and options.
Description: Detailed steps for installing a SIM card and connecting to a 4G network, including warnings about SIM card handling.
Description: Steps to connect to a Wi-Fi network, including toggling Wi-Fi on/off and selecting networks.
Multimedia (Audio & Video)
- Music Audio: Insert a USB drive/SD card with music files and tap the music icon to open the player.
- Video Playback: Insert a USB drive/SD card with video files and tap the video icon to open the player. Features include Picture-in-Picture (PIP), screen ratio adjustment, and various playback modes (Random, File Repeat, Repeat All).
Description: Information on safe video playback practices and how to play audio files from USB/SD.
Description: Instructions for playing video files from USB/SD, including features like Picture-in-Picture and screen ratio adjustments.
Safety Note: Video playback while driving is prohibited by law and can cause distractions. The unit's factory settings prevent video playback while driving. To view video images, stop in a safe place and apply the parking brake.
DSP (Digital Sound Processor)
- Sound Effect: Tap the DSP EQ icon to open settings. Select from presets like Standard, Soft, Rock, Pop, Normal, Lobby, Cinema, Classical, Jazz, and Custom.
- EQ (Equalizer): Adjust frequencies for the corresponding sound effect.
- Sound Stage Center: Adjust the listening position (front left, front right, rear mode, center) for optimal sound.
- Loudness: Set the level of boost for low and high tones (Gain from 0dB to 12dB, FC options).
Description: Explains how to access and select different sound effect presets using the built-in DSP.
Description: Details how to fine-tune audio frequencies using the equalizer settings.
Description: Instructions for optimizing the sound stage for the best listening experience.
Description: Explains how to adjust loudness settings to boost low and high tones.
Steering Wheel Control
To use the steering wheel remote control feature, you need to adjust the settings on the XTRONS unit. Sometimes a special adapter (not included) is required.
Setup Steps:
- From the Home screen, go to Settings > Steering wheel.
- Press "Reset" to clear all settings.
- Touch the desired function key on the screen, then press the same function button on the steering wheel.
- Repeat until all relevant functions are programmed. Press "Save" to store settings.
Description: Steps to configure steering wheel controls, including resetting and saving settings.
Note: In vehicles with a digital steering wheel control system (CAN bus), this feature may not be available due to protocol limitations. The buttons are predefined by the vehicle manufacturer.
Phone Link (CarPlay & Android Auto)
- Wireless CarPlay (iOS): Go to Settings > Bluetooth, turn on Bluetooth. Select the head unit's Bluetooth name, enter password (0000). After connection, click "Use CarPlay" when prompted. CarAutoPlay will load.
- Wired Android Auto (Android): Install "Android Auto" app on your phone. Open CarAutoPlay, plug your phone via USB. CarAutoPlay will load automatically.
- Wireless Android Auto (Android): Turn on Bluetooth and Wi-Fi on phone and head unit. Pair phone via Bluetooth. Wi-Fi will automatically connect. Open CarAutoPlay app.
Description: Instructions for setting up wireless CarPlay for iOS devices.
Description: Instructions for setting up wired and wireless Android Auto for Android devices.
Note: The system automatically disables Bluetooth and Wi-Fi when using wireless CarPlay or Android Auto. For wireless CarPlay, iPhone must have iOS 12.0 or above. For Android Auto, your phone must be able to install Google services and apps.
USB Tethering
- Android Device: Connect your Android phone via USB. Open phone settings > Network & Internet > Hotspot & Tethering. Enable USB tethering.
- iOS Device: Enable iPhone network settings in XTRONS unit (Settings > More > Factory Setting > 0000-OK > App > Enable USBMUXD). On iPhone, go to Personal Hotspot and turn it on. Connect iPhone via USB. Tap "Trust" if prompted.
Description: Steps to enable USB tethering from an Android phone to provide internet access to the XTRONS unit.
Description: Steps to enable USB tethering from an iPhone to provide internet access to the XTRONS unit.
Gyroscope (Available on Specific Models)
The gyroscope provides accurate data about your vehicle's orientation and tilt, useful during off-road adventures or challenging terrain navigation.
- Reset Button: When parked on a flat surface, press to calibrate the gyroscope system.
- Settings: Customize the display interface.
- Change Level Meter Direction: Adjust display direction for horizontal position.
- Change Incline Meter Direction: Adjust display direction for vertical angles.
Description: Explains the gyroscope feature for displaying vehicle orientation and tilt, useful for off-road navigation.
Description: This image demonstrates the inclinometer feature, which uses built-in gyroscope sensors to display real-time vehicle orientation data, useful for off-road driving.
Connect to Other External Devices
- Audio/Video Input (CBVS signal): Connect external devices to the AV-IN input terminal. Select AV-IN as the source.
- OBD02 (Dongle is optional): Retrieve real-time information and error codes. Plug the OBD dongle to your vehicle's OBD port. Tap to search OBDII in Bluetooth mode and pair. Use the "Torque" app.
- USB DAB (Dongle is optional): Use the DAB app with a connected DAB dongle for digital radio.
- DVR (Dash Cam, optional): Record your journey and access files from the unit.
- TPMS (Tyre Pressure Monitoring System, optional): Monitor tyre pressure and temperature with the TPMS app.
Description: Instructions for connecting external audio/video devices and OBD2 dongles.
Description: Illustrates the Torque app interface for OBD2 diagnostics, with notes on dongle compatibility and data reading.
Description: Details optional accessories like USB DAB tuners, DVRs, and TPMS for extended functionality.
Description: A visual guide to various optional accessories that can extend the functionality of the XTRONS car radio, including cameras, OBD tools, DVRs, DAB tuners, TPMS, keyboards, and video output adapters.
3.3 Settings Overview
Access various settings to customize your unit's behavior and appearance.
- General: Auto Play, Show Screenshot Button, USB-TV Out, Auto Start, Size Setting, Colour Setting, CANbus type classification.
- Display: Night Brightness Control, Panel Colour Setting, Panel Colour Power, Brake (video warning), Brightness, Wallpaper, Exit Sleep Show Boot Logo.
- Network: Internet (Wi-Fi), Airplane Mode, Hotspot & Tethering, Data Saver, VPN, Private DNS, WiFi Switch.
- Navi: Navi App Select, Automatic Entry Navigation, Navi Prompt Mode, Navigation Mix Ratio.
- Reverse: Mirror Rearview Camera Images (Normal/Mirror), Mute during Backwards.
- Sound: Keypress Beep, Power on Volume Limit, Power on Volume, Power on BT Volume, Media Volume.
- Radio: Radio Area, Radio Auto Antenna, RDS Enable, Power Off Memory.
- Steering Wheel: Configure steering wheel controls.
- About: View device information (model, Android version, CPU, RAM, flash).
- More: System Setting, Network & Internet, Apps, Storage, Sound & Vibration, Display, Location, System (Languages, Keyboard), Date & time, System Update, About Device, Factory Setting.
Description: General settings for auto-play, screenshot button, USB-TV out, display size and color, and CANbus configuration.
Description: Display-related settings such as brightness, panel color, wallpaper, and boot logo options.
Description: Internet connectivity settings, including Wi-Fi, hotspot, VPN, and private DNS.
Description: Navigation-specific settings for app selection, automatic entry, prompt mode, and audio mix ratio.
Description: Settings related to the rearview camera display and audio behavior during reversing.
Description: Audio settings for keypress feedback and various volume controls.
Description: Radio-specific settings for region, antenna, RDS, and power-off memory.
Description: Information about configuring steering wheel controls.
Description: Provides details about the device's hardware and software specifications.
Description: Additional settings categories for system, network, and applications.
Description: Settings for managing storage space and various sound and vibration preferences.
Description: Further display settings such as brightness, screen timeout, dark theme, and wallpaper.
Description: Settings for location services and system preferences like language and keyboard.
Description: Advanced system settings for date/time, software updates, device information, and factory reset.
4. Maintenance
To ensure the longevity and optimal performance of your XTRONS car radio, follow these general maintenance guidelines:
- Keep the screen clean using a soft, lint-free cloth. Avoid abrasive cleaners.
- Ensure proper ventilation around the unit to prevent overheating. Do not block any vents.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive humidity.
- Regularly check wiring connections to ensure they are secure and free from damage.
- Perform system updates as recommended to ensure the latest features and security patches are applied.
5. Troubleshooting
This section provides solutions to common issues you might encounter.
Q: The unit does not turn on.
A: 1. Reset the unit and reconnect. 2. Check the connection with multimedia and test the ground (black), constant 12V (yellow), and accessory 12V (red) wires to see if you have the correct voltage in the correct wires, as well as a good ground. 3. Check if the fuse has blown. 4. Check your vehicle wiring diagram and make sure everything is connected according to the diagram.
Q: Radio Auto searching does not stop.
A: Switch off AF & TA.
Q: Bluetooth pairing constantly connects and disconnects.
A: 1. The Bluetooth reception is poor. Move the mobile phone closer to the unit. 2. Remove any obstacle between the mobile phone and the unit. 3. Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the product. 4. For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the product. 5. Disconnect Wireless CarPlay or Wireless Android Auto. 6. Remove all other paired Bluetooth devices from the pairing list on the XTRONS device. 7. If your phone has other saved Bluetooth devices, reset the connection and reconnect from scratch. 8. Restart the XTRONS device and the Bluetooth device you want to connect.
Q: No sound?
A: Check whether the speaker wires are connected appropriately. The positive (+) terminal of the speaker should be connected to the positive terminal of any other component, including the battery. Connect the amplifier control wire (REM) from your car to the amplifier control wire (AMP wire) of the XTRONS unit.
Q: SIM card cannot be detected. / No Internet connection.
A: 1. Check SIM card status. 2. Check the signal status. 3. Enable the Mobile data. 4. Check APN settings.
Q: GPS no signal / poor signal.
A: Check if the GPS antenna is connected to the unit properly. We recommend mounting the GPS antenna either on the dash or along the rear deck, as long as it has a clear path to the sky and is not too close to A-pillars or a 2-way antenna. You should consider mounting the antenna on the exterior of your vehicle if: You have a wired rear defroster. You have a metallic window tint. You have a solar reflective window. You have a windscreen-mounted radio antenna.
Q: Touch screen not responding.
A: 1. Remove the plastic touch screen protector sheet. Some protector sheets are too thick and prevent the touch screen from responding to your touch. 2. Calibrate the touch screen (contact XTRONS support for further information). 3. Reset the unit.
Q: Radio reception is poor.
A: 1. The car antenna is not extended. Please pull out the antenna all the way. 2. Find out whether vehicle has installed an active car antenna. If so, you need phantom power. 3. Check the radio region in the settings of your unit. 4. Try different radio antenna.
Q: How to change the language on the unit?
A: Settings > More > System setting > System > Languages > System Languages.
Q: How to change the Date and Time?
A: Settings > More > System setting > System > Data & time.
Q: How to change the display wallpaper?
A: Press and hold any blank area of the lower screen area, the unit will turn to the wallpaper setting menu.
Q: How to change Speed Unit.
A: Press the speed unit from the Home screen then you can switch the unit.
Q: Reversing camera image is reversed.
A: Check the settings and change the "mirrored" setting: Settings > Reverse > Mirror rearview camera images.
Q: Reversing camera has no video signal.
A: 1. If it's an original reversing camera, please contact XTRONS customer service and provide your vehicle model and year for further assistance. 2. If it's an aftermarket reversing: 1). Ensure the reversing camera is properly connected to the head unit. Check all the wiring connections and make sure they are secure and correct. Pay special attention to the reversing control wire and the video input cable. 2). Check the video cable to ensure there is no damage. 3). Verify the standard of your reversing camera. 4). Inspect the rear camera to make sure it is intact.
Q: Poor image quality of reversing cameras (Fuzzy, flashing, grainy, black and white static, etc).
A: 1. Check if there is dirt on the camera. 2. Add a Power Filter Rec. 3. Use a camera which supports the video system of your car or use a converter.
Q: OBD fails to connect to ECU.
A: 1. Remove the OBD02 and plug it again, make sure it is connected well, otherwise it will fail to read if not fully seated in the port. 2. Reset the unit, clear all the phone connections in Bluetooth. 3. If possible, please try the OBD02 in a different car and see if it works. 4. Disconnect the OBD2 dongle from your phone before you connect it to the unit.
Q: Why can't third-party launchers be installed? / Why can't third-party launchers be permanently saved?
A: For devices featuring rotatable screens, it's important to note that third-party launchers are typically not optimized for this functionality. As a result, these launchers may not be compatible or cannot be permanently saved on such devices.
Description: Solutions for common problems such as power issues and Bluetooth connectivity.
Description: Solutions for audio problems, SIM card detection, GPS signal, touchscreen unresponsiveness, and radio reception.
Description: Solutions for date/time, display customization, speed unit, and various reversing camera issues.
Description: Solutions for OBD connectivity problems and limitations with third-party launchers on rotatable screens.
6. Specifications
The XTRONS 7-inch 2K Android 14 Car Radio is equipped with advanced features and robust hardware for an enhanced in-car experience.
Description: A comprehensive table listing all technical specifications of the XTRONS car radio, from power supply to supported media formats and vehicle compatibility.
| Feature | Specification |
|---|---|
| Brand Name | XTRONS |
| Model | PX7453BGS |
| Din | One Din |
| Display Size | 7" |
| Operating System | Android 14 |
| RAM | 4GB |
| ROM | 64GB |
| CPU | Octa Core 2.2GHz 12nm Processor |
| Resolution | 1280*720 (2K Video Playback) |
| Out Power | 4*45W (STMicroelectronics TDA7388 Amplifier Chip) |
| Voltage | 12V |
| Item Weight | 3.2kg |
| Item Size | 161*183*51 mm |
| Max External Memory | 128G |
| Digital Media Format | CD, Mp3, MP4, WMA, JPEG |
| Special Features | Built-In Speaker/Microphone, Support 3G/4G Network, Support Can-Bus, Built-in GPS, DSP, CarPlay, Android Auto, Gyroscope Sensors, Multi-color Light Effects, Screen Mirroring, AHD Camera Support |
| Origin | Mainland China |
| For Vehicle Brands/Model | BMW X5 E53 (1999-2006) |
| Certification | CE, FCC |
| Material | ABS |
| Warranty | 1 year |
Key Features:
- Automotive-Grade Hardware: High Power Amplifier (4x45W), 178° viewing angle IPS Screen, Built-in AKM DSP, Bluetooth 5.0, Dual Band WiFi (2.4G/5G), Octa-core up to 2.2GHz frequency, Global 4G LTE support, Wireless CarPlay, Wireless Android Auto.
- Built-in Gyroscope Sensors: Provides inclinometer information for off-road use, displaying current ride height, roll, pitch angle.
- Multi-color Light Effects: Customizable button lights with 4 modes (User, Auto, Random, Gradient) and dozens of color options.
- Screen Mirroring: Cast content from your smartphone to the large screen.
- Support AHD Camera: Instant reversing mode compatible with AHD 720P/1080P cameras for real-time reversing image and wider angle night vision.
- 2K Video Playback: Supports various video formats up to 2K 60fps.
- Efficient Cooling System: All-aluminum heat sink, 20% thicker than other models, for optimal heat dissipation.
- Optimized CANBus Decoding: Retains original vehicle features like ACC control, light control, reversing control, handbrake control, door status, outdoor temperature, speed, steering wheel control, mileage, and IBUS.
- Fast and Accurate GPS Navigation: Supports multiple satellite systems (GPS, BDS, GLONASS, GALILEO) for precise positioning.
- Radio with RDS: STMicroelectronics SI4755 chip for front-end low-noise amplifiers, multi-path noise mitigation, and RDS decoding.
- Built-in SD Card Slot: Extend car stereo capacity with a Micro SD/TF card (Not Included).
Description: An overview of the advanced hardware features of the XTRONS car radio, highlighting its powerful processor, memory, display, connectivity options, and integrated sensors.
Description: Highlights the automotive-grade Octa Core processor, emphasizing its speed, efficiency, and ability to operate in extreme temperatures.
Description: Highlights the latest Android 14 operating system, emphasizing enhanced security, seamless operation, and ample memory.
Description: Highlights the high-power amplifier for clear audio and the region-free DVD/CD playback capability.
7. Warranty and Support
XTRONS is committed to providing high-quality products and outstanding customer service. This product comes with a 1-year warranty.
Description: An illustration of the rigorous quality assurance tests performed on XTRONS products to ensure durability and reliability.
For further installation, technical advice, or support, please visit our official websites and community channels:
- Official Website: www.xtrons.com
- Facebook Group: https://www.facebook.com/groups/1037383397682256/
- Facebook Page: https://www.facebook.com/xtrons/
- Twitter: https://twitter.com/xtrons_ug
- YouTube: https://www.youtube.com/user/ourxtrons/
Description: Provides links to XTRONS' online resources for support and community.
8. User Tips
Here are some helpful tips from other users to enhance your experience with the XTRONS car radio:
- Installation: Always double-check the wiring diagram carefully before making connections. If your BMW X5 E53 has an original DSP system, you might need an additional EXL007 adapter for proper sound integration.
- Performance: The unit is highly responsive, and the screen offers excellent clarity. Take advantage of the built-in DSP for superior sound quality by experimenting with the equalizer and sound stage settings.
- Connectivity: When using wireless CarPlay or Android Auto, remember that Bluetooth and Wi-Fi functionalities on the head unit will be temporarily disabled. For 4G connectivity, ensure the Micro-SIM card is inserted in the correct direction to avoid signal issues.
- Customization: While the unit offers various UI themes, be aware that some third-party launchers may not be fully optimized for devices with rotatable screens and might not save permanently.