Introduction
The Fitbit Inspire 3 is an intelligent fitness tracker designed to help you monitor your health and fitness. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your device.
Official product video showcasing the Fitbit Inspire 3 in various active scenarios, highlighting its features.
Setup
What's in the Box
Your Fitbit Inspire 3 package includes:
- Fitbit Inspire 3 tracker
- Charging cable
- Small band (attached)
- Additional large, bottom band
Note: Detachable bands are available in various colors and materials, sold separately.
Charge Your Tracker
A fully-charged Inspire 3 provides up to 10 days of battery life. Actual results may vary based on usage.
- Plug the charging cable into a USB port on your computer, a UL-certified USB wall charger, or another low-energy charging device.
- Align the pins on the other end of the charging cable with the gold contacts on the back of Inspire 3. Gently press Inspire 3 into the charger until it snaps into place.
To remove Inspire 3 from the charging cable:
- Hold Inspire 3 and slide your thumbnail between the charger and the back of the tracker on one of the corners.
- Gently press down on the charger until it separates from the tracker.
Charging takes approximately 1-2 hours. Double-tap the screen to check the battery level while charging. A solid battery icon indicates a full charge.
Set Up Inspire 3
Set up your Inspire 3 using the Fitbit app on your iPhone, iPad, or Android phone. Ensure your phone is compatible by checking fitbit.com/devices.
- Download the Fitbit app from the Apple App Store (for iPhones) or Google Play Store (for Android phones).
- Install and open the app.
- Tap 'Sign in with Google' and follow the on-screen instructions to set up your device.
Wear Inspire 3
You can wear Inspire 3 on your wrist or in a clip accessory (sold separately).
Placement for All-Day Wear vs. Exercise
For all-day wear, position Inspire 3 a finger's width above your wrist bone. For optimal heart-rate tracking during exercise, you may need to wear the tracker slightly higher on your wrist and ensure the band is snug but not constricting.
It is recommended to remove your tracker for about an hour after extended wear, especially during showering, to reduce exposure to soaps and prevent skin irritation.
Handedness
For accurate tracking, specify whether you wear Inspire 3 on your dominant or non-dominant hand in the Fitbit app: Today tab > Devices icon > Inspire 3 > Wrist.
Wear Inspire 3 in a Clip
To wear Inspire 3 clipped to your clothing, remove the bands and place the tracker in the clip. When in clip mode, certain features like heart-rate tracking and Active Zone Minutes are turned off.
To put Inspire 3 in the clip:
- If previously worn on wrist, change device setting to CLIPPED on Body.
- Hold the tracker with the screen facing you, ensuring it's not upside down.
- Hold the clip accessory with the opening facing you and the clip on the back facing down.
- Place the top of the tracker into the clip opening and move the bottom into place. Ensure all edges lie flat.
Wear the clip on or close to your body with the screen facing outward, securing it tightly to a shirt pocket, bra, pants pocket, belt, or waistband.
Operating Instructions
Basics
The Inspire 3 features a color AMOLED touchscreen and two buttons. Navigate by tapping the screen, pressing buttons, and swiping. The screen turns off when not in use to conserve battery.
Basic Navigation
- Wake the screen by tapping twice, pressing buttons, or turning your wrist.
- Swipe down for quick settings, Find Phone app, and Settings app.
- Swipe up to view daily stats.
- Swipe left and right to browse apps.
- Swipe right to go back; press buttons to return to the clock screen.
Quick Settings
Swipe down from the clock face to access quick settings. Tap a setting to adjust it. Dimmed icons with a line indicate the setting is off.
| Setting | Description |
|---|---|
| Settings app | Access all device settings. |
| Water lock | Prevents screen/button activation when in water. Notifications still appear. To unlock, firmly double-tap the screen. |
| Find Phone | Locates your paired phone by making it ring loudly. |
| Sleep mode | Mutes notifications, dims screen, prevents screen from turning on with wrist turn. |
| DND mode | Mutes all notifications and reminders. |
| Auto wake | Screen turns on when you turn your wrist. |
Clock Faces and Apps
Personalize your tracker with various clock faces from the Fitbit Gallery. Swipe left/right from the clock face to see installed apps.
To change the clock face: Today tab > Devices icon > Inspire 3 > Gallery > Clocks tab. Select and install your preferred clock face.
Notifications from Your Phone
Inspire 3 displays call, text, calendar, and app notifications. Keep your tracker within 30 feet of your phone.
Set Up Notifications
Ensure Bluetooth is on and phone notifications are enabled. In the Fitbit app: Today tab > Devices icon > Inspire 3 > Notifications. Follow prompts to pair and enable desired app notifications.
Answer or Reject Phone Calls
Tap the green phone icon to accept (answers on your phone) or the red phone icon to reject (sends to voicemail).
Respond to Messages (Android Phones)
Respond to text messages and app notifications with preset quick replies or emojis. Keep your phone nearby with the Fitbit app running in the background.
Timekeeping
Set up to 8 alarms using the Alarms app. Alarms vibrate to wake or alert you. You can also use the Timers app for a stopwatch or countdown timer.
Set an Alarm
Use the Alarms app to set one-time or recurring alarms. Enable Smart Wake for optimal wake-up times.
Dismiss or Snooze an Alarm
Swipe up from the bottom of the screen and tap the dismiss icon to turn off an alarm. Swipe down to snooze for 9 minutes.
Activity and Wellness
Inspire 3 continuously tracks various stats, syncing data to the Fitbit app.
See Your Stats
Swipe up from the clock face to view daily stats including steps, distance, Active Zone Minutes, calories burned, exercise days, heart rate, hourly activity, menstrual health, SpO2, readiness score, and sleep data.
Track Your Sleep
Inspire 3 automatically tracks sleep stages (REM, light, deep), sleep score, estimated oxygen variation, and skin temperature.
Manage Stress
Track and manage stress using mindfulness features. The Relax app provides guided breathing sessions.
Exercise and Heart Health
Track exercise automatically or manually with the Exercise app.
GPS Requirements
Connected GPS is available for supported phones. Ensure Bluetooth and GPS are on, Inspire 3 is paired, and the Fitbit app has GPS permissions.
Check Your Heart Rate
Inspire 3 personalizes heart-rate zones. Monitor your heart rate and zone during exercise. The tracker notifies you when you enter a heart-rate zone.
| Zone | Calculation | Description |
|---|---|---|
| Below Zone | Below 50% of max HR | Below the fat burn zone, heart beats slower. |
| Fat Burn Zone | Between 50% and 69% of max HR | Moderate activity like a brisk walk. Heart rate and breathing elevated, but conversation is possible. |
| Cardio Zone | Between 70% and 84% of max HR | Vigorous activity like running or spinning. |
| Peak Zone | Greater than 85% of max HR | Short, intense activity for performance and speed, such as sprinting or high-intensity interval training. |
Earn Active Zone Minutes
Earn Active Zone Minutes for time spent in fat burn, cardio, or peak heart-rate zones. You earn 2 Active Zone Minutes for each minute in cardio or peak zones.
Maintenance
Wear and Care Tips
- Regularly clean your band and wrist with a soap-free cleanser.
- If your tracker gets wet, remove and dry it completely.
- Take your tracker off periodically to give your skin a break.
For more information, visit Fitbit Wear & Care.
Change the Band
Inspire 3 comes with a small band attached and an additional large, bottom band. Both can be swapped with accessory bands (sold separately).
Remove a Band
- Turn over Inspire 3 and locate the quick-release lever.
- While pressing the quick-release lever inward, gently pull the band away to release it.
- Repeat for the other side.
Attach a Band
- Hold the band and slide the pin (opposite the quick-release lever) into the notch on the tracker.
- While pressing the quick-release lever inward, slide the other end of the band into place.
- Release the quick-release lever when both ends of the pin are inserted.
Troubleshooting
Update, Restart, and Erase
Update Inspire 3
Update your tracker to receive the latest features. A notification appears in the Fitbit app when an update is available. Ensure your tracker's battery is at least 20% charged, or plug it into the charger before updating.
Restart Inspire 3
If you experience syncing issues or tracking problems, restart your tracker from your wrist: Settings app > Restart Device > Restart.
If unresponsive: Connect to charging cable. Press and hold buttons for 10 seconds. Release when Fitbit logo appears. If charging cable lacks a button, disconnect/reconnect 3 times.
Erase Inspire 3
To clear personal data before giving away or returning your device: Settings app > Device Info > Clear User Data. Swipe up, then press 'Hold 3 Sec' for 3 seconds. Data is erased when the Fitbit logo appears and the device vibrates.
Heart-Rate Signal Missing
If dashed lines appear instead of a heart rate, ensure heart-rate tracking is on (Settings app) and Inspire 3 is set to WORN on Wrist. Adjust placement on your wrist (higher/lower, tighter/looser) to ensure skin contact. Your heart rate should reappear shortly.
GPS Signal Missing
Environmental factors (tall buildings, dense forests) can interfere with GPS signals. If your phone is searching for a GPS signal, 'connecting' appears on screen. Wait for the signal to connect for best results.
Other Issues
If you encounter issues such as failure to sync, unresponsiveness to taps/buttons, incorrect data tracking, or no notifications, try restarting your Inspire 3.
Specifications
Sensors and Components
- Optical heart-rate tracker
- Red and infrared sensors for oxygen saturation (SpO2) monitoring
- 3-axis accelerometer
- Ambient light sensor
- Vibration motor
Materials
The classic band is made of flexible, durable silicone. The housing and buckle are plastic.
Wireless Technology
Inspire 3 contains a Bluetooth 5.0 radio transceiver.
Haptic Feedback
Inspire 3 uses a vibration motor for alarms, goals, notifications, and reminders.
Battery
Inspire 3 contains a rechargeable lithium-polymer battery.
Memory
Inspire 3 stores 7 days of data, including daily stats, sleep information, and exercise history. Historical data is available in the Fitbit app.
Display
Inspire 3 features a color AMOLED display.
Band Size
| Band Type | Circumference |
|---|---|
| Small band | 5.5 - 7.1 inches (140 mm - 180 mm) |
| Large band | 7.1 - 8.7 inches (180 mm - 220 mm) |
Environmental Conditions
| Condition | Value |
|---|---|
| Operating temperature | 32° to 104°F (0° to 40°C) |
| Storage temperature for 3 months | -4° to 104°F (-20° to 40°C) |
| Water resistance | Water resistant up to 50 meters |
| Maximum operating altitude | 28,000 feet (8,534 m) |
IP Rating
Model FB424 has a water resistance rating of IPX8 under IEC standard 60529 (up to a depth of 50 meters) and a dust ingress rating of IP6X, indicating it is dust-tight.
User Tips
- Consider alternative band materials for enhanced comfort during extended wear, as the standard plastic strap may not suit all users.
Warranty and Support
Return Policy and Warranty
For detailed warranty information and return policy, please visit the official Fitbit website.
Regulatory and Safety Notices
This device complies with various regulatory standards, including FCC, IC, and EU directives. Full regulatory content can be viewed on your device via Settings > Device Info > Regulatory Info.
For a comprehensive user manual and detailed regulatory information, please refer to the official PDF document available at: Fitbit Inspire 3 User Manual (PDF).
About the Battery
The Inspire 3 contains a non-replaceable internal lithium-ion battery. Observe the following safety precautions:
- Do not disassemble, crush, puncture, or dispose of the battery in fire or water.
- Do not expose the battery to flames, explosions, or other hazards.
- Do not use sharp objects to remove the battery.
- Dispose of used batteries according to local regulations.