Racbox Motorcycle LED Spotlight

Contents

Racbox Motorcycle LED Dual Color Spotlight User Manual

Model: Motorcycle LED Spotlight | Batch/Serial Number: 020-03

1. Product Overview

The Racbox Motorcycle LED Dual Color Spotlight is a versatile auxiliary lighting accessory designed for motorcycles, dirt bikes, scooters, and off-road vehicles. It features dual-color functionality, providing both white and yellow light options, making it suitable for use as a spot beam, auxiliary light, or fog light. This product is intended for normal replacement and upgrade of original lighting systems.

Racbox Motorcycle LED Dual Color Spotlight with white, yellow, and mixed light patterns

Figure 1: Racbox Motorcycle LED Dual Color Spotlight with various light modes.

Product Showcase Video

Video 1: A brief demonstration of the LED spotlight's features and appearance.

2. Safety & Warnings

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Installation Instructions

Follow these steps to properly install your LED spotlight:

  1. Mount the Spotlight: Fix the provided bracket and install the spotlights securely at your desired position on the vehicle.
  2. Connect Power Wires: Connect the power wires to the vehicle's battery. Ensure correct polarity: the red wire connects to the positive (+) terminal, and the black wire connects to the negative (-) terminal.
  3. Install Switch: Install the control switch on the handlebar (or other accessible location) and route the wires neatly and securely, away from moving parts or heat sources.
  4. Test Functionality: Turn on the power to test the lights and ensure all functions are working correctly.
  5. Adjust and Secure: Adjust the light angle for optimal visibility and tidy up any remaining wiring harness to prevent interference or damage.

Note: If the light does not turn on after installation, please reverse the plug polarity.

Wiring diagram for the LED spotlight showing red, yellow, and black wires

Figure 2: Wiring diagram. Red for White light, Yellow for Yellow light, Black for Negative.

LED spotlight installed on a motorcycle's front bar

Figure 3: Example installation of the spotlight on a motorcycle.

4. Operating Instructions

Once installed, operate the spotlight using the control switch. The dual-color feature allows you to switch between white and yellow light modes, or a combination of both, depending on your visibility needs and road conditions.

  • White Light Mode: Provides bright, clear illumination for general riding conditions.
  • Yellow Light Mode: Offers enhanced visibility in adverse weather conditions such as fog, rain, or dust.
  • Mixed Light Mode: Combines both white and yellow light for a broader spectrum of illumination.
Output beam pattern of the yellow light mode

Figure 4: Yellow light beam pattern.

Output beam pattern of the white light mode

Figure 5: White light beam pattern.

5. Maintenance

To ensure the longevity and optimal performance of your LED spotlight, follow these simple maintenance guidelines:

  • Cleaning: Regularly clean the lens and housing with a soft, damp cloth. Avoid abrasive cleaners that could scratch the lens.
  • Inspection: Periodically check all wiring connections for tightness and signs of wear or damage. Ensure the mounting bracket is secure.
  • Heat Dissipation: The spotlight features an aluminum alloy housing designed for efficient heat dissipation. Ensure the heat sink fins are free from dirt or obstructions to maintain proper cooling.
Close-up of the aluminum alloy heat sink fins on the spotlight

Figure 6: Aluminum alloy housing for effective heat dissipation.

6. Troubleshooting

If you encounter issues with your LED spotlight, refer to the following common troubleshooting steps:

  • Light Does Not Turn On:
    • Check all wiring connections to ensure they are secure and correctly connected (red to positive, black to negative).
    • If the light still does not turn on, try reversing the plug polarity.
    • Verify the power source (battery) is providing adequate voltage (12V-48V).
    • Inspect the switch for proper functionality.
  • Intermittent Operation:
    • Check for loose connections or damaged wiring.
    • Ensure the spotlight is securely mounted and not vibrating excessively.

7. Specifications

Feature Specification
Brand Name Racbox
Model Name Motorcycle LED Spotlight
Light Color White + Yellow (Dual Color)
Input Voltage 12V-48V
Origin Mainland China
Material Aluminum Alloy
Dimensions (approx.) 3.4 cm (W) x 4.4 cm (D) x 5.2 cm (H)
Mounting Bolt M6
Package Weight 0.26 kg
Package Dimensions 10 cm (L) x 7 cm (W) x 7 cm (H)
Product size diagram showing dimensions in millimeters

Figure 7: Detailed product dimensions.

8. User Tips

Based on user experiences, here are some helpful tips for your LED spotlight:

  • The compact size of the spotlight makes it suitable for mounting on various locations, including motorcycle handlebars or car front bumpers.
  • Despite its small volume, users report sufficient brightness for its intended purpose.
  • The dual-color functionality (white and yellow) is effective for both general illumination and as a fog light in challenging conditions.
  • While the product offers good value, handle the wiring with care during installation as some users have noted the cable quality.

9. Warranty & Support

This product meets relevant national automotive lighting industry standards and has undergone strict quality testing. For detailed information regarding compliance, warranty, or support, please refer to the official documentation.

Manufacturer Information:

Guangzhou Bai Ji Tun Trading Co., Ltd
C116, No. 1489, Fanghua Road Baiyun
Guangzhou, China
Email: tdlaccount@126.com

EU Authorized Representative:

APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK
NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Email: info@apex-ce.com

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

© 2024 Racbox. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.