METALFISH DH450

Contents

METALFISH DH450 45mm Low Profile CPU Cooler User Manual

Model: DH450

1. Introduction

The METALFISH DH450 is a compact, low-profile CPU cooler designed for ITX systems and other space-constrained computer builds. Featuring 6 copper heatpipes and a 90mm PWM fan, it offers efficient cooling performance for CPUs with up to a 150W TDP. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.

METALFISH DH450 Black CPU Cooler with specifications overlay
The METALFISH DH450 CPU Cooler, showcasing its compact design and key specifications.

2. Specifications

Feature Specification
Model Number DH450
Cooler Type Low Profile
Cooler Dimensions (LxWxH) 110mm x 92mm x 45mm
Heatpipes 6 (φ6mm)
TDP (Thermal Design Power) 150W
Fan Size 92mm x 92mm x 15mm
Fan Speed 900 - 2800 RPM ±10%
Fan Airflow 12.59 - 38.9 CFM ±10%
Fan Noise Level 18 - 28 dBA ±10%
Fan Bearing Type Fluid Bearing (Hydraulic)
Power Interface 4-Pin PWM
Fan Voltage 12V
Fan Life Expectancy 50,000 hours
Blade Quantity 9
Air Pressure 2.19
Supported CPU Sockets Intel: LGA1851, LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA1170, LGA1366, LGA2011, LGA2066
AMD: AM5, AM4, AM3, AM2, FM2, FM1
Certifications CE, FCC, RoHS

3. Package Contents

Please verify that all components are present in the package:

  • DH450 CPU Cooler Unit (with pre-attached fan)
  • AMD Mounting Bracket
  • Intel Mounting Bracket
  • Fixed Nuts (4 pcs)
  • Screws (various sizes for different sockets)
  • Insulation Pads (4 pcs)
  • Thermal Grease (1 tube, 12.8W conductivity)
Included accessories for the DH450 CPU cooler, showing brackets, screws, and thermal paste.
Typical package contents for the DH450 CPU Cooler.

4. Installation Instructions

Before starting, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details if needed.

4.1 General Preparation

  1. Carefully remove any existing CPU cooler.
  2. Clean any old thermal paste from the CPU surface and the cooler's base using isopropyl alcohol and a lint-free cloth.
  3. Apply a small amount of the provided thermal grease to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
  4. Heatsink base with protective film being removed
    Ensure to remove the protective film from the heatsink base before installation.

4.2 AMD Platform Installation

  1. Accessories Display: Identify the AMD bracket (A), fixed nuts (B), screws, insulation pads, and thermal grease.
  2. Step 1: Stick the black insulation pads onto the 4 fixed nuts.
  3. Step 2: Install the AMD bracket onto the radiator.
  4. Step 3: Remove the original AMD bracket from the motherboard, but keep the original backplane of the motherboard.
  5. Step 4: Clean up the top of the CPU, then apply new thermal paste.
  6. Step 5: Adjust the screw position according to the motherboard installation holes.
  7. Step 6: Tighten the four fixed nuts with insulation pads from the back of the motherboard to secure the cooler.
  8. Step 7: Connect the 4-pin fan socket to the CPU FAN socket on the motherboard. If applicable (for ARGB versions), connect the ARGB socket to the 5V+3pin ARGB socket on the motherboard.
Detailed AMD CPU Cooler Installation Instructions diagram
AMD Installation Diagram for DH450 CPU Cooler.

4.3 Intel Platform Installation

  1. Accessories Display: Identify the Intel bracket (A), fixed nuts (B), screws, insulation pads, and thermal grease.
  2. Step 1: Stick the black insulation pads onto the 4 fixed nuts.
  3. Step 2: Install the Intel bracket onto the radiator.
  4. Step 3: Clean up the top of the CPU, then apply new thermal paste.
  5. Step 4: Adjust the screw position according to the motherboard installation holes.
  6. Step 5: Tighten the four fixed nuts with insulation pads from the back of the motherboard to secure the cooler.
  7. Step 6: Connect the 4-pin fan socket to the CPU FAN socket on the motherboard. If applicable (for ARGB versions), connect the ARGB socket to the 5V+3pin ARGB socket on the motherboard.
Detailed Intel CPU Cooler Installation Instructions diagram
Intel Installation Diagram for DH450 CPU Cooler.
Motherboard backplate for mounting the CPU cooler
Example of motherboard backplate installation for secure mounting.

5. Operating Instructions

The DH450 CPU cooler features a 4-pin PWM fan, which allows your motherboard to dynamically control the fan speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise during lighter loads.

  • Automatic Fan Control: Once connected to the CPU_FAN header, your motherboard's BIOS/UEFI or operating system software will manage the fan speed automatically.
  • Manual Fan Control (Optional): You may adjust fan curves in your motherboard's BIOS/UEFI settings or through compatible software to customize performance and noise levels according to your preference.
  • ARGB Lighting (if applicable): If you have the ARGB version and it's connected to a compatible 5V+3pin ARGB header, you can control the lighting effects using your motherboard's RGB software.
DH450 cooler with RGB fan installed inside a PC case, showing lighting effects
The DH450 cooler installed in a PC case, demonstrating its aesthetic appeal with ARGB lighting.

6. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your CPU cooler.

  • Dust Removal: Periodically (every 3-6 months, depending on environment) use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning.
  • Fan Cleaning: If dust buildup is heavy, carefully remove the fan (if detachable) and clean the blades with a soft brush or cloth.
  • Thermal Paste: It is recommended to reapply thermal paste every 2-3 years, or if you remove the cooler for any reason.

7. Troubleshooting

  • Fan Not Spinning:
    • Check if the 4-pin PWM cable is securely connected to the CPU_FAN header on the motherboard.
    • Ensure the system is powered on and the CPU is generating heat. The fan may not spin at very low temperatures if PWM control is active.
    • Verify fan settings in BIOS/UEFI.
  • High CPU Temperatures:
    • Confirm that the cooler is securely mounted and making good contact with the CPU.
    • Check if thermal paste was applied correctly and evenly.
    • Ensure there is adequate airflow within your PC case.
    • Verify fan speed settings; increase fan speed if temperatures are consistently high.
  • Excessive Noise:
    • Check for any cables or obstructions hitting the fan blades.
    • Ensure the fan is securely mounted and not vibrating.
    • Adjust fan speed settings in BIOS/UEFI to a lower RPM if temperatures allow.

8. User Tips

  • Mounting Method: For some motherboard types, especially those requiring a backplate, you may find it easier to secure the cooler by screwing it in from behind the motherboard. This ensures a firm and even contact.
  • Case Compatibility: Always double-check the cooler's dimensions (45mm height) against your PC case's maximum CPU cooler clearance, especially for mini-ITX or small form factor cases, to prevent compatibility issues.
  • Thermal Paste Application: While a pea-sized dot is standard, some users prefer spreading a thin, even layer across the CPU's IHS for optimal coverage, especially with larger CPUs.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

A digital version of this user manual is available in PDF format: View User Manual (PDF)

10. Important Safety Information

  • Always disconnect power from your computer before installing or performing maintenance on the CPU cooler.
  • Handle components with care to avoid damage.
  • Keep out of reach of children.
  • Do not attempt to modify the cooler or its components.
  • Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive components.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.