JIANKEXING JK-X1-01

Contents

Nordic Minimalist Art Designer Pendant Light User Manual

Model: JK-X1-01 | Brand: JIANKEXING

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Nordic Minimalist Art Designer Pendant Light. Please read this manual thoroughly before installation and retain it for future reference.

The pendant light features a creative DIY design, allowing users to place small decorative items inside the transparent lampshade to personalize their lighting fixture. It is suitable for various spaces including parlors, studies, master bedrooms, other bedrooms, hotel halls, and hotel rooms, particularly children's rooms.

Three Nordic Minimalist Art Designer Pendant Lights in yellow, white, and black, each with different decorative items inside, hanging in a children's room setting.
The Nordic Minimalist Art Designer Pendant Light, showcasing its customizable interior.

2. Safety Warnings

  • Electrical Safety: Before installation or any maintenance, always disconnect the power supply at the main circuit breaker to prevent electric shock. All electrical work should be performed by a qualified electrician.
  • Installation: The chandelier or ceiling hanging board must be securely fixed using appropriate screws (e.g., explosive screws). Ensure the hanging plate can withstand the lamp's weight.
  • Handling: Wear gloves during installation to avoid scratching or damaging the lamp surface.
  • Environment: Do not mount the lamp in wet or damp ceilings, or areas with lime water. Ensure the installation area is well-ventilated and dry.
  • Cleaning: Use only non-corrosive, environmentally friendly cleaning agents. Do not use water or corrosive chemicals/gases for cleaning. Wipe with a clean, soft cloth.

3. Setup Instructions

Before proceeding, ensure the power supply is disconnected.

  1. Mount the Hanging Plate: Secure the hanging plate to the ceiling using appropriate screws. Ensure it is firmly attached and can support the lamp's weight.
  2. Attach Hanging Chain: Connect the hanging chain to the hanging plate.
  3. Hang the Lamp Body: Carefully hang the lamp body onto the chain.
  4. Complete Assembly: Ensure all parts of the lamp assembly are securely in place.
  5. Connect Wiring: Connect the power line according to local electrical codes. Ensure proper grounding.
  6. Final Check: Verify that the lamp is completely and correctly assembled before restoring power.
Diagram showing four steps for installing a pendant light: 1. Mounting the ceiling plate, 2. Attaching the lamp holder and wiring, 3. Hanging the lamp body, 4. Final assembly and connection.
Installation Steps Diagram
Video demonstrating the pendant light being switched on and off.

4. Operating Instructions

Once installed and power is restored, operate the pendant light using the integrated knob switch. The light is designed for use with E27 LED bulbs (not included).

DIY Customization

The transparent acrylic lampshade allows for creative personalization. You can place small, lightweight decorative items inside the clear bottom section to match your room's aesthetic or create a unique display. Ensure any items placed inside do not obstruct the light source or airflow, and are not flammable.

A person's hand placing small robot figures inside the clear bottom part of a pendant light, demonstrating the DIY customization feature.
Personalize your pendant light by adding decorative items.

5. Maintenance

  • Cleaning: To clean the lamp, ensure the power is off. Use a clean, soft, dry cloth. Do not use water, abrasive cleaners, or corrosive chemicals.
  • Bulb Replacement: Always turn off the power before replacing the E27 LED bulb. Allow the bulb to cool completely before handling.
  • Inspection: Periodically check the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.

6. Troubleshooting

  • Light does not turn on:
    • Check if the power supply is connected and the circuit breaker is on.
    • Ensure the bulb is correctly installed and not faulty.
    • Verify all wiring connections are secure.
  • Flickering light:
    • Ensure the bulb is fully screwed in.
    • Check for loose wiring connections.
    • Replace the bulb if it is old or damaged.
  • Lamp surface is scratched:
    • Minor scratches may be polished with a suitable acrylic polish (for the transparent part) or touch-up paint (for the metal part), if applicable.
    • Always handle with care and wear gloves during installation to prevent scratches.

7. Specifications

Feature Detail
Model Number JK-X1-01 (MD3923)
Brand Name JIANKEXING
Rated Voltage 90 - 260 V
Light Source LED bulbs (E27 Base Type)
Luminous Flux 249-2000 lm
Material Glass Stone, Iron
Finish Plated
Installation Type Cord Pendant
Lighting Area 15-30 square meters
Lampshade Color Options WHITE, Black, Red, Yellow
Is Dimmable No
Is Smart Device No
Certifications CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC
Package Dimensions (L x W x H) 45 cm x 45 cm x 45 cm
Package Weight 3.0 kg

8. Warranty and Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For detailed item guides and documents, including a PDF user manual, please refer to the official product page or contact the seller directly. The PDF manual can be found at: User manual (PDF)

For technical support or further assistance, please contact JIN YI Lighting Store through the platform where you purchased the product.

9. User Tips

  • Personalize Your Light: Take advantage of the transparent design to display small, lightweight figurines, artificial plants, or other decorative elements that complement your room's theme. This is especially popular for children's rooms.
  • Consider Lighting Color: The lamp supports both Cold White and Warm White E27 bulbs. Choose Cold White for a brighter, more energetic ambiance, or Warm White for a cozy, inviting atmosphere.
  • Regular Cleaning: A quick wipe with a soft, dry cloth regularly will keep your pendant light looking new and prevent dust buildup from affecting its aesthetic and light output.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.