1. Introduction
The Xiaomi Mi Router 4C is a high-performance wireless router designed to provide stable and fast Wi-Fi connectivity for your home or small office. Featuring four external antennas, it ensures wide coverage and reliable signal strength. This manual will guide you through the setup, operation, and troubleshooting of your new router.
2. Package Contents
- Xiaomi Mi Router 4C
- Power Adapter
- User Manual
3. Product Overview
3.1 Router Ports and Buttons

Image: Rear view of the Xiaomi Mi Router 4C showing the power input, two LAN ports, one WAN port, and the reset button.
- Power Input: Connect the provided power adapter here.
- LAN Ports (2): Connect your wired devices (e.g., computers, gaming consoles) to these ports.
- WAN Port (1): Connect this port to your DSL/Cable/Satellite modem or directly to your internet wall socket.
- Reset Button: Used to restore the router to factory default settings.
3.2 Indicator Lights
The router features two indicator lights on the front panel:
- Network Status Light (Blue): Indicates the status of your internet connection.
- System Status Light (Blue, Orange, Purple): Indicates the router's operational status.
4. Setup Instructions
4.1 Step 1: Connect the Cables
- Connect Power: Plug the power adapter into the router's power input and then into a power outlet.
- Connect to Modem: Connect the Internet (WAN) port of the router to your DSL/Cable/Satellite modem using an Ethernet cable. If your internet network is connected via an Ethernet cable from a wall socket, connect that cable directly to the router's WAN port.
4.2 Step 2: Set Up the Network Connection
- Connect to Wi-Fi: On your phone or computer, search for the Wi-Fi network broadcast by the router (the default Wi-Fi name is usually found on a sticker at the bottom of the router, with no password initially). Connect to this network. Wait until the system indicator light turns blue.
- Access Configuration Page: Open a web browser and go to
router.miwifi.comor192.168.31.1. You should be directed to the router's configuration page. - Enter Broadband Details: If prompted, enter the account name and password provided by your internet service provider (ISP). Click/tap Next. (This step may not be required depending on your ISP's connection type).
- Set Wi-Fi and Administrator Passwords: Create a new Wi-Fi name (SSID) and password. You will also be prompted to set an administrator password for accessing the router's settings. You can choose to use the same password for both.
- Reconnect to Wi-Fi: Wait until the indicator light turns blue and stops flashing. Then, reconnect your devices to the newly configured Wi-Fi network using the new password.
4.3 Mi WiFi App Management
You can manage your router settings via the web interface at router.miwifi.com or by downloading the Mi WiFi app. Scan the QR code provided in the app store or on the router's packaging to download the official Mi WiFi app for convenient management from your smartphone.
5. Operating Instructions
- Wi-Fi Settings: Adjust your Wi-Fi name, password, security type, and channel settings through the web interface or Mi WiFi app.
- Repeater Mode: The Mi Router 4C supports repeater mode to extend your existing Wi-Fi coverage. This feature can typically be configured via the Mi WiFi app or the router's web interface.
- Quality of Service (QoS): Prioritize network traffic for specific applications or devices to ensure optimal performance for critical tasks.
- Unauthorized Access Prevention: Enhance your network security by managing connected devices and preventing unauthorized access.
- Wi-Fi Optimization: Utilize built-in tools to optimize your Wi-Fi signal and performance.
6. Maintenance
- Firmware Updates: Regularly check for and install firmware updates via the Mi WiFi app or the router's web interface. Firmware updates provide security enhancements, bug fixes, and new features.
- Factory Reset: If your router is not functioning correctly or you wish to clear all settings, you can perform a factory reset. With the router powered on and working normally, press and hold the Reset button on the back of the router for more than 5 seconds. Release the button when the system status light turns orange. The router will restart with factory default settings.
7. Troubleshooting (FAQ)
7.1 I have finished setting up my network. Why can't I connect to the Internet?
- Use your phone to search for the Wi-Fi network you set up. If you cannot find it, ensure the router is connected to power and is working normally.
- Connect your phone to your router's Wi-Fi network, go to
router.miwifi.com, and try to fix the problem based on the network diagnostics results.
7.2 I've forgotten the administrator password for my router. What should I do?
If you haven't set a specific password, your administrator password might be the same as your Wi-Fi password. Try using your Wi-Fi password to log in. If the problem persists, it is recommended to restore your router to factory settings and set up the network again.
7.3 How do I restore my router to the factory settings?
First, ensure the router is working normally. Then, press and hold the Reset button at the base of the router for more than 5 seconds. Release the button when the system status light turns orange. The reset is successful once the router finishes restarting.
7.4 What do the different indicator lights mean on the router?
| Indicator Light | Status | Meaning |
|---|---|---|
| Network Status Light (Blue) | Off | No external internet port connection or connection problem. |
| On | Normal network connection. | |
| Flashing | Sending or receiving data. | |
| System Status Light (Blue, Orange, Purple) | Off | Switched off or not connected to power. |
| Orange | System updating (flashing), system booting up (on, not flashing). | |
| Blue | Functioning normally (on, not flashing). | |
| Purple | Safe mode (flashing), system failure (on, not flashing). |
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | Mi Router 4C (R4CM) |
| Wi-Fi Transmission Standard | 802.11n |
| 2.4G Wi-Fi Transmission Rate | 300 Mbps |
| Wi-Fi Supported Frequency | 2.4 GHz |
| LAN Ports | 3 x 10/100Mbps |
| WAN Ports | 1 x 10/100Mbps |
| Antenna Type | Fixed External Antennas (4) |
| Wireless Transmission Rate | 300m |
| Support Mesh | Not Supported |
| RAM | 64MB |
| Operating Temperature | 0-40°C |
| Input | 5V, 1A |
| Operating Frequency | 2400MHz-2483.5MHz (≤20dBm) |
9. User Tips
- Optimal Placement: Place your router in a central location in your home, away from obstructions and other electronic devices that may cause interference, to ensure the best Wi-Fi coverage.
- Strong Passwords: Always use strong, unique passwords for your Wi-Fi network and router administrator access to protect your network from unauthorized access.
- Regular Updates: Keep your router's firmware updated to benefit from the latest security patches, performance improvements, and new features.
- Guest Network: Utilize the guest network feature (if available via app/web interface) to provide internet access to visitors without giving them access to your main network.
10. Regulatory Information and Support
10.1 Certifications
CE: Hereby, Xiaomi Communications Co., Ltd declares that the radio equipment type R4CM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html
10.2 WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
10.3 Caution
- The product can be used within all European Union countries.
- To comply with CE RF exposure requirements, the device must be installed and operated 20cm (8 inches) or more between the product and all person's body.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Use only power supplies listed in the user manual / user instruction. Power Adapter Model: RD0501000-C55-123OGD.
10.4 Manufacturer
Manufactured by: Xiaomi Communications Co., Ltd
#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
