IRALAN Ceiling Fan with Light (52/42 Inch)

Contents

IRALAN Ceiling Fan with Light User Manual

Model: Ceiling Fan with Light (52/42 Inch)

1. Safety Information

READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN.

  • To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.
  • All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
  • The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less".
  • The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor.
  • Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
  • Do not place objects in the path of the blades.
  • To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.
  • Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
  • After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
  • All setscrews must be checked and re-tightened where necessary before installation.

WARNINGS:

  • To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
  • To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
  • To avoid possible electrical shock, make sure that the electricity is turned off at the main power box before starting work. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
  • Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
  • To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting bracket is supported directly from the building structure or the outlet box marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less". Use only the screws provided with the outlet box.

2. Pre-installation

Tools Required

  • Phillips screwdriver
  • Flat blade screwdriver
  • Step ladder
  • Drill
  • Wrench

Hardware Included

ItemDescriptionQuantity
AABlade attachment screw and fiber washer6
BBTapping Screws4
CCExpansion Bolts2

Package Contents

ItemDescriptionQuantity
AFan-motor assembly1
BLED light kit1
CLamp panel1
DAcrylic sheet1
EInside canopy5
FBlade3
GCanopy1
H10 CM Ball/downrod assembly1
I20 CM Ball/downrod assembly1
JCoupling cover1
KRemote control (Transmitter)1
LRemote control (receiver)1

3. Assembly Instructions

3.1 Mounting Hanger

For Wooden Ceiling:

  1. SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.
  2. Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Self Tapping Screws (B) will be drilled.
  3. Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, install the mounting bracket onto wooden ceiling with the 4 Self Tapping Screws (B).

IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG.

For Concrete Ceiling:

  1. SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.
  2. Use the Mounting Bracket (A) as a guide, mark the spots where the 2 Expansion Bolts (B) will be drilled.
  3. Remove the Mounting Bracket (A). Drill 2 holes for 8MM diameter and insert 2 Expansion Bolts (B) into the concrete ceiling, install the mounting bracket and secure with Flat Washers (C), Spring Washers (D) and Nuts (E).

IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG.

3.2 Install the Downrod

  1. Insert the canopy and the Bolt & Pin cover onto the downrod. Carefully feed motor wires through the downrod assembly.
  2. Slide the ball down the downrod.
  3. Put the round latch in.
  4. Replace the hanger ball at its normal position.
  5. Secure the two screws.

3.3 Install Downrod Assembly

  1. Thread the suspender through the suspended clock and coupling cover.
  2. Then insert the tail of the suspender from the lifting head of the motor.
  3. Remove the lateral pin out from the suspended head position, secure with R type pin (Clevis pin).
  4. Tighten the lifting head screws. Tighten the 2 Set Screws on the Coupling to serve as a clamping force on the Downrod to prevent fan shaking during operation.
  5. Route the Coupling cover, Canopy Ring, Canopy and Hanger Ball through the Downrod in turn, and then install the Lock pin through the hole on the Downrod. Fix it by Screw, then slip down the Coupling Cover in correct position.

3.4 Installing Remote Control Receiver

Once wiring step has been completed, slide the wired remote receiver in between the mounting bracket and the top of the downrod ball for downrod fans.

3.5 Install the Canopy

  1. Carefully push the canopy to the bottom of the mounting bracket, make two sliding holes aligned to the two prominent screws on the mounting bracket, and then turn clockwise until tight.
  2. Push the canopy ring to the bottom of the canopy, slide the inner holes aligned to the two prominent screws on the mounting bracket again, and turn the canopy ring clockwise until tight.

3.6 Attaching the Fan Blades

  1. Remove 6 screws from the motor and attach the blades to the motor.

3.7 Attaching the Light

CAUTION: To reduce the risk of electric shock, disconnect the electrical circuit to the fan before installing the light fixture.

  1. Remove three screws from the plate on the motor.
  2. Use these three screws to assemble the light kit fitter.
  3. Connect the light source and lock it to the lamp tray with three screws.
  4. Install the acrylic sheet.

4. Operation

4.1 Remote Control Functions

The remote control must match the same code as the receiver.

  1. NO/OFF: Turns the fan and light on or off.
  2. Wind speed 1-6 gear: Adjusts fan speed.
  3. Increased brightness: Increases light brightness.
  4. Reduced brightness: Decreases light brightness.
  5. Fan forward/reverse switch: Changes fan blade direction for summer/winter mode.
  6. General (turn off all functions): Turns off all fan and light functions.
  7. Turn off the fanCode: Disables fan control.
  8. Increased color temperature: Adjusts light color to cooler tones.
  9. Lower color temperature: Adjusts light color to warmer tones.
  10. Natural Wind: Activates a natural breeze simulation mode.
  11. 2-hour time: Sets a 2-hour timer for operation.
  12. Night light: Activates a dim night light mode.

4.2 APP Control Instructions

  1. Step 1: Scan the QR Code to download and install the app on your phone.
  2. Step 2: Turn on the light and search for the light in the app, then pair them.

The app allows control of fan power (1-6 buttons), changing color temperature, and turning the light/fan on/off. To pair, turn on the light and press the pairing button immediately.

4.3 Remote Control Wiring Diagram

WARNING: Turn off the electric power during installation and making wire connection.

  1. Connect the wire from the ceiling fan into the receiver.
  2. Connect the wire from the receiver with the wire from the house.

Wiring Connections:

  • From CEILING FAN to Receiver.
  • From House (Brown wire) to Receiver (FOR DC IN L).
  • From House (Blue wire) to Receiver (FOR DC IN N).

5. Care and Cleaning

WARNING: Make sure the power is off before cleaning your fan.

  • Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
  • Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
  • You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
  • You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.

6. Troubleshooting

ProblemSolution
The fan will not start
  • Check the main and branch circuit fuses or breakers.
  • Check the line wire connections to the fan and switch wire connections in the switch housing.
The fan is noisy
  • Ensure all motor housing screws are snug.
  • Ensure the screws that attach the fan blade bracket to the motor hub are tight.
  • Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
  • Allow a 24-hour "breaking in" period. Most noises associated with a new fan disappear during this time.
  • If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure.
  • Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
  • Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.

7. Specifications

Ceiling fan dimensions and specifications

Image: Detailed dimensions and key specifications of the IRALAN Ceiling Fan.

  • Input Voltage: 85-265V
  • Motor Power: 30W
  • LED Power: 18W
  • Size: 52 inch / 42 inch (Blade Diameter)
  • Application Space: 10-20M²
  • Wind Speed: 6 Gears
  • Luminous Flux: 2000-82000
  • Control Method: REMOTE CONTROL
  • Number of Lights: >8 (LEDs)
  • Is Dimmable: Yes
  • Is Bulbs Included: Yes
  • Certification: CE
  • Body Material: ABS, aluminum, Copper
  • Sound Level: 30dB (Quiet for Sleep), Whisper 35dB, Chatting 46dB
  • Downrod Length Options: 10cm / 20cm
  • Color Temperature Options: 3000K, 4000K, 6000K
IRALAN Ceiling Fan with Light, remote control, and app control interface

Image: Main product view highlighting input voltage (85-265V) and low sound level (30dB).

Ceiling fan features: powerful motor, wide fan blade, 3 color temperatures, ABS blades, reversible DC motor

Image: Features including powerful motor, wide fan blades, 3 color temperature options (3000K, 4000K, 6000K), durable ABS fan blades, and a reversible DC motor.

Ceiling fan reverse function for summer and winter modes

Image: Illustration of the fan's reverse function, providing downward airflow for Summer Mode and upward airflow for Winter Mode.

Ceiling fan noise levels: whisper 35dB, chatting 46dB

Image: Noise level comparison, showing ultra-quiet operation at 35dB (whisper) and 46dB (chatting).

Ceiling fan motor technology: TurboSilent, 6 wind speeds, DC Brushless Motor

Image: Motor technology details, featuring TurboSilent™ power, 6 wind speeds, and a DC Brushless Motor for higher performance.

8. Warranty and Support

Warranty Information

To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and re-installing the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty.

Because of varying climatic conditions, this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of "wobble" is normal and should not be considered a defect.

Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Warranty Period: 2 years

Support

For after-sales inquiries, please contact us via email: sxdsltd@163.com

An official user manual in PDF format is also available for download. You can view it here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.