1. Introduction and Key Features
This ANYFAR module integrates Wireless CarPlay and Android Auto functionality into your Porsche PCM3.1 or PCM4.0 system, allowing seamless access to navigation, music, and voice control. It retains the original screen and controls while adding modern smartphone connectivity.
Functional Statement
- CarPlay / Android Auto: The built-in vehicle machine interaction system cooperates with the central control knob button to provide voice command and control of phone, information, navigation, music. Operate Siri voice interaction to obtain more information. Supports wireless and wired connection for CarPlay and Android Auto.
- Mirroring: Supports wired and wireless mirroring functions for iPhone and Android phones.
- Reversing Video Input: The smart module can decode video and can be equipped with rear-view video input. It can also decode video and install a rear view camera.
- USB Video Playback: Automatic media playback function. Can be directly inserted into a U disk to play video and audio media.

2. Specifications
Applicable Systems and Car Models
This module is compatible with Porsche vehicles equipped with PCM3.1 or PCM4.0 systems.
| System | Car Model | Years | Screen Inch |
|---|---|---|---|
| PCM 4.0 | Cayenne | (Not specified, check compatibility) | 7" |
| PCM 4.0 | Panamera | 2017-2018 | 7" |
| PCM 4.0 | Cayman | (Not specified, check compatibility) | 7" |
| PCM 3.1 | (Various models) | (Various years) | (Various sizes) |

Physical Specifications
- Dimensions (L x W x H): 27 cm x 20 cm x 12 cm (approximate, based on package dimensions)
- Weight: 1.022 kg (approximate, based on package weight)
- Origin: Mainland China
- High-concerned chemical: None
3. Package Contents
The product package typically includes the following items:
- Main CarPlay/Android Auto Module
- Power Cable
- RCA/USB Cable
- LVDS IN/OUT Cable
- WiFi Antenna
- User Manual (PDF available online)

4. Installation Guide
Important: Professional installation is recommended. Disconnect the car battery before starting installation. Refer to the full PDF manual for detailed diagrams and safety instructions.
4.1. Toggle Switch Setup
The module features toggle (DIP) switches to configure settings based on your car's screen size and resolution. The switches are located on the side of the main module, near the LVDS port.
For 7/8 inch screen (800x480 resolution):
| Switch No. | Setting |
|---|---|
| 1 | OFF |
| 2 | OFF |
| 3 | ON |
| 4 | ON |
| 5-8 | OFF |
Ensure the switches are set correctly before connecting the module to your vehicle.
4.2. Cable Connection
Carefully follow the wiring instructions. The module connects between the original car display and the head unit. Key connections include:
- LVDS Cable: Connect the provided LVDS cable between the original display cable and the module.
- Power Cable: Connect the power cable to the car's power supply and the module.
- AUX Connection: Ensure the AUX channel is selected on your car's original system for audio output from the module. If there is any noise, try unplugging the AUX cable and re-plugging it.
- USB Video: For USB media playback.
- Camera Connections: Inputs for rear view (CVBS) and front view cameras.
- WiFi Antenna: Connect the WiFi antenna for wireless connectivity.
After all cables are connected, press and hold the "MEDIA" and "BACK" buttons on your car's console for 3 seconds to switch between the PCM original car interface and the CarPlay interface.
5. Smartphone Connection Methods
5.1. Wireless CarPlay Connection
- Open the system's wireless CarPlay connection interface on the car screen.
- On your iPhone, turn on Bluetooth and Wi-Fi.
- On your iPhone, go to Bluetooth settings and select the device name starting with "CAR-XXXX" (e.g., "CAR-5eba").
- Confirm the Bluetooth pairing request on your iPhone. A code (e.g., 543374) will be displayed; ensure it matches.
- After successful pairing, select "Use CarPlay" when prompted.

5.2. Wireless Android Auto Connection
- Open the system's wireless Android Auto connection interface on the car screen.
- On your Android phone, turn on Bluetooth and Wi-Fi.
- On your Android phone, go to Bluetooth settings and select the device name starting with "CAR-XXXX" (e.g., "CAR-5eba").
- Pair your phone with the car system.
- After successful Bluetooth pairing, follow the on-screen Android Auto connection process.

5.3. Apple Wireless Screen Mirroring (AirPlay)
- On the car screen, select the "AirPlay" icon.
- On your iPhone, ensure Wi-Fi is on.
- Connect your iPhone to the Wi-Fi network named "CAR-WIFI-XXX". The password is 66668888.
- After the CarPlay Wi-Fi connection is successful, pull down the status bar on your iPhone, select "Screen Mirroring", and then click "Airplay" to start mirroring.
5.4. Android Wireless Screen Mirroring (AutoLink)
- On the car screen, select the "AutoLink" icon.
- Use your Android phone to scan the QR code displayed on the car screen or manually download and install the AutoLink app.
- On your Android phone, ensure Wi-Fi is on.
- Connect your Android phone to the Wi-Fi network named "CAR-WIFI-XXXX". The password is 66668888.
- Open the AutoLink Pro app on your phone, search for "CAR-WIFI-XXXX", and connect.
- Click "START NOW" in the app to begin screen mirroring.
6. Operating Instructions
6.1. Steering Wheel Button Control
The module supports control via your car's original steering wheel buttons. Functions include:
- Volume Control: Swipe up to increase volume, swipe down to decrease volume.
- Call Management: Answer or hang up calls.
- System Switch: Long press for 3 seconds to switch between the original car system and the CarPlay/Android Auto interface.
Note: Due to different car models, the exact operation method may vary. Consult customer service if needed.
6.2. Console Knob and Button Control
The module also integrates with the original joystick knob and console buttons for control:
- Navigation Button (NAVI): Long press the "NAVI" button to switch to the CarPlay system.
- Phone Button (PHONE): Press "PHONE" or say "Hey Siri" to use voice control for calls.
- Source Button (SOURCE): Press "SOURCE" and select the AUX channel for audio.
- Knob Control: Rotate left and right to adjust volume, press to select.
- Previous/Next Song: Use the dedicated buttons to switch songs.


6.3. Audio Settings (Echo Cancellation)
If you experience an echo during phone calls, perform the following steps for echo correction:
- Go to Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button.
- Ensure the car environment is quiet.
- Set the volume to a moderate position.
- Wait 20 seconds for the estimation to complete.
6.4. Reversing Settings
To configure camera settings:
- Go to Settings > Reversing Settings.
- Select the camera type: "Original camera" for factory-installed cameras.
- Toggle options for Parking Line, Radar, Reverse Camera Mirror, and Front Camera Mirror as needed.

7. Troubleshooting
- No Display/Black Screen: Ensure all cables are securely connected, especially the LVDS cable. Verify the power connection. Try switching between the original car system and the module interface by long-pressing MEDIA and BACK buttons.
- No Audio: Confirm that the car's original system is set to the AUX audio input channel. Check all audio cable connections.
- Connectivity Issues (CarPlay/Android Auto): Ensure your phone's Bluetooth and Wi-Fi are enabled. Forget previous Bluetooth connections on your phone and re-pair. Make sure the car's Wi-Fi is connected to the module's Wi-Fi network (password 66668888 for mirroring).
- Echo during Calls: Refer to the "Audio Settings (Echo Cancellation)" section (6.3) to perform echo correction.
- Camera Not Displaying: Check camera connections. Verify settings in Settings > Reversing Settings, ensuring the correct camera type is selected.
- System Compatibility: This module is designed for Porsche PCM3.1 and PCM4.0 systems. If your car model or year is not explicitly listed, please verify compatibility with the seller before installation.
8. User Tips
- Always ensure your phone's operating system is up to date for optimal CarPlay/Android Auto performance.
- For the best audio quality, use high-quality data cables for wired connections.
- If you experience any unusual behavior, try restarting both your phone and the car's infotainment system.
- Before contacting support, gather your Order ID, Car Model, Year of the Car, Screen Size, Dip Switch Setup, pictures of the LVDS cable connection, and the software version (found in CarPlay decoder menu > Settings > System Version).
9. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. When contacting support, please provide the following information to help expedite the process:
- Order ID
- Car Model
- Year of the Car
- Screen Size of the Car
- Dip Switch Setup (current settings)
- Pictures of the LVDS Cable Connection
- Software Version (Go to the CarPlay decoder menu, enter "Settings," and select "System Version." The software version will be displayed there.)
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)