Douk Audio P5

Contents

Douk Audio P5 Mini Tube Headphone Amplifier User Manual

Model: P5 | Brand: Douk Audio

Introduction

The Douk Audio P5 Mini Tube Headphone Amplifier is a versatile desktop audio device designed to enhance your listening experience. It features a dual-mono architecture with 6A2 vacuum tubes for a warm, analog sound, and offers both headphone amplification and preamplifier functionalities. This manual provides essential information for safe and optimal use of your P5 amplifier.

Douk Audio P5 Mini Tube Headphone Amplifier
Douk Audio P5 Mini Tube Headphone Amplifier (Wooden Version)

Safety Information

  • High Voltage Inside: The P5 amplifier operates with high internal voltage. Always power off and disconnect the device from the power source before attempting to replace op-amps or vacuum tubes.
  • Ventilation: Ensure proper ventilation and heat dissipation, as vacuum tubes generate heat during operation. Do not cover the device.
  • Interference: Keep the device away from sources of high-frequency or electromagnetic interference, such as Wi-Fi routers, cordless phones, radios, and other wireless devices.
  • Power Sockets: Avoid sharing power sockets with inductive loads such as refrigerators, fans, washing machines, etc., as this can introduce noise.

Package Contents

Please check the box for the following items:

  • 1x P5 Headphone Amplifier (Optional)
  • 1x DC 12V Power Adapter
  • 2x 6A2 Tubes
  • 1x User Manual (this document)
Douk Audio P5-M (wooden version) packing list and dimensions
Package contents for P5-M (Wooden Version)
Douk Audio P5-L (aluminum version) packing list and dimensions
Package contents for P5-L (Aluminum Version)

Front and Rear Panel Description

Front Panel

Front panel diagram of Douk Audio P5
Front Panel Layout
  1. 4.4mm Headphone Output (Balanced)
  2. Power On/Off/Volume Knob
  3. 6.35mm Headphone Output (Single-Ended)

Rear Panel

Rear panel diagram of Douk Audio P5
Rear Panel Layout
  1. RCA Input (Left/Right)
  2. 3.5mm AUX Input (Priority over RCA input)
  3. DC 9-15V Power Input (≥1A)
  4. Headphone Impedance Switch (16-200Ω / 200-600Ω)
  5. RCA Output (Left/Right)
  6. Backlight LED Color Switch
  7. Tube Warm-up Time Setting (Adjustable 10-30 seconds)

Setup Instructions

  1. Install Vacuum Tubes: Carefully insert the provided 6A2 vacuum tubes into their respective sockets on the top panel. Ensure the pins of the tubes align with the holes in the socket. (Check if tube pins are deformed before insertion).
  2. Connect Audio Output:
    • For headphones: Connect your headphones to either the 4.4mm balanced or 6.35mm single-ended headphone jack on the front panel.
    • For external amplifier/active speakers: Connect a power amplifier or active speakers to the RCA output on the rear panel.
  3. Connect Audio Input: Connect your audio source (e.g., MP3 player, phone, tablet PC, CD/DVD player, TV/TV set-top box, laptop/Mac/computer) to either the RCA input or the 3.5mm AUX input on the rear panel. Note that the 3.5mm AUX input has priority over the RCA input.
  4. Connect Power: Connect the DC 9-15V power adapter to the power input jack on the rear panel, then plug the power cable into a wall socket.
Douk Audio P5 in a desktop setup, showing connections and impedance switch
Example setup with headphones and audio source

Operating Instructions

  1. Power On: Rotate the power/volume knob clockwise to turn on the device. The tubes will begin to warm up.
  2. Tube Warm-up: A warm-up period of 10-30 seconds is required. It is normal for there to be no audio output during this tube activation phase. The warm-up time can be adjusted via the setting on the rear panel (clockwise for longer, counter-clockwise for shorter).
  3. Select Output Priority:
    • Output priority is: 4.4mm headphone jack > 6.35mm headphone jack > RCA output.
    • If headphones are plugged into either front jack, the RCA output will be muted.
    • If both headphone jacks are used, the 4.4mm jack takes priority over the 6.35mm jack.
  4. Adjust Headphone Impedance: If using headphones, toggle the headphone impedance switch on the rear panel to match your headphone's impedance (16-200Ω or 200-600Ω) for optimal performance.
  5. Play Music: Start playing music from your audio source and adjust the volume using the front knob to your preferred listening level.
  6. LED Backlight: You can select from 6 LED color modes using the backlight LED color switch on the rear panel.
  7. Power Off: Rotate the power/volume knob counter-clockwise until it clicks to turn off the P5, then disconnect the power adapter.
Video: Douk Audio P5 Product Demonstration and Features

Maintenance

  • Tube Replacement: The P5 is designed with pluggable tube sockets. The default 6A2 tubes can be replaced by compatible tubes such as 5654/6*7N/6AK5/EF95/403B. Always power off and disconnect the device before replacing tubes.
  • Op-Amp Replacement: The P5 uses 2PCS pluggable NE5532 op-amps, which can be replaced by dual op-amps like 4558/JRC2068/2064/MUSE01S/2111. Ensure the device is powered off and disconnected before replacing op-amps.
  • Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or solvents.

Troubleshooting

Q: No sound output?
A:
  • Check all cable connections (audio source, P5, amplifier/speakers, headphones).
  • Verify the audio source is playing and not muted or paused.
  • Ensure the correct input (AUX or RCA) is selected and that unused input ports are disconnected, especially if using RCA input (AUX has priority).
  • Confirm that the output priority is correctly managed (4.4mm > 6.35mm > RCA). Unplug unused output ports.
  • Allow 10-30 seconds for tube warm-up; no audio output during this time is normal.
  • Try a different power supply to rule out power supply issues.
Q: Sound is distorted?
A: Distortion often occurs when the volume of the audio source, P5, and the amplifier/speakers are all set to maximum. Try reducing the volume of one of them. Generally, adjust the amplifier volume to about 60%, then fine-tune the P5's volume. This can significantly reduce distortion.
Q: Low sound volume when headphones are connected?
A:
  • Confirm that the impedance, plug type, and other parameters of your headphones are compatible with the P5.
  • Ensure the input signal is not too low.
  • Adjust the headphone impedance switch on the rear panel to match your headphones.
Q: Pop sound when switching on/off?
A: Ensure the on-off sequence is correct. When turning on, follow the signal transmission order: audio source > preamp/DAC > amplifier > speaker. When turning off, the sequence is reversed. Turning off the preamp first and then the amplifier can cause a pop sound due to internal capacitors discharging, which may damage the amplifier or speakers. Always turn off the amplifier/speakers first, then the P5, then the audio source.
Q: Humming sound even with volume turned up to maximum without tubes installed?
A: The preamp amplifies audio signals. Even without tubes, other components like capacitors or resistors can still produce a weak signal coupling. Always install the tubes correctly before use.
Q: Noise at high volume when using rear RCA output?
A: This could be due to interference or ground loop issues. Ensure proper grounding and keep the device away from other electronics that might cause interference. Check cable quality.

Specifications

Parameter Value
BrandDouk Audio
ModelP5
Audio InputAUX / RCA (Priority: AUX > RCA)
Audio Output4.4mm & 6.35mm Headphone Output / RCA (Priority: 4.4mm > 6.35mm > RCA)
THD>0.01%
SNR80dB
Gain (Low Impedance)5dB@200Ω
Gain (High Impedance)15dB@600Ω
RCA Max. Output Level (Low Impedance)1.5Vrms
RCA Max. Output Level (High Impedance)5.75Vrms
Headphone Output Power (32Ω)200mW
Headphone Output Power (300Ω)80mW
Matched Headphone Impedance16-600Ω
Headphone Impedance SwitchSupported
Backlight LED Color6 modes
Tubes Warm-up TimeAdjustable 10–30 seconds
Input VoltageDC 9-15V/≥1A (5.5*2.5mm)
Dimensions (W*D*H, Wooden/Aluminum)102*102*40mm / 4.01*4.01*1.57in
Net Weight (Wooden)310g / 0.68lb
Net Weight (Aluminum)420g / 0.92lb

Note: Specifications are subject to change without notice.

User Tips

  • The P5 can be effectively used as a preamplifier between a turntable and a receiver's phono input to add a warm tube sound.
  • When installing or removing vacuum tubes, exercise caution as the tube sockets can be very tight.
  • The P5 is highly customizable. You can experiment with different compatible op-amps (e.g., 4558/JRC2068/2064/MUSE01S/2111) and vacuum tubes (e.g., 5654/6*7N/6AK5/EF95/403B) to fine-tune the sound to your preference. No soldering is required for these upgrades.
  • For high-impedance headphones like the Sennheiser HD 650 (300Ω), the P5 is capable of driving them effectively, providing 80mW of power at 300Ω. Ensure the impedance switch is set correctly.

Warranty and Support

For detailed warranty information and technical support, please refer to the official Douk Audio website or contact their customer service. This manual is intended for informational purposes only. A PDF version of the user manual may be available for download from the manufacturer's website for further details.

Official Website: www.doukaudio.com

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.