Aramox JS-TGZ-U1

Contents

Electric Linear Actuator User Manual

Model: JS-TGZ-U1

Electric Linear Actuator

Image: The Electric Linear Actuator, a device designed for converting rotary motion into linear reciprocating motion.

1. Introduction

This manual provides essential information for the safe and efficient use of your Electric Linear Actuator, Model JS-TGZ-U1. This device is designed to convert the rotary motion of a motor into a linear reciprocating motion, suitable for various applications requiring precise linear movement.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • General Safety: Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
  • Intended Use: Do not use this product for purposes other than its intended use.
  • Inspection: Inspect the product before each use; do not use if damaged.
  • Installation & Operation: Follow installation and operation guidelines to avoid injury.
  • Environmental Conditions: Do not expose to water or moisture.
  • Handling: Handle with care to avoid cuts or injuries, especially during installation.
  • Electrical Safety: Ensure the power supply matches the actuator's voltage (24V DC). Incorrect voltage can damage the unit.
  • Load Limits: Do not exceed the maximum push/pull force of 750N. Overloading can cause damage and premature failure.

3. Package Contents

Please check the package for the following items:

  • 1 x Electric Linear Actuator (Model JS-TGZ-U1)
  • 2 x Mounting Holders
  • 4 x Retaining Pins
Linear Actuator with accessories

Image: The Electric Linear Actuator along with its mounting holders and retaining pins.

4. Setup Instructions

4.1 Mounting the Actuator

  1. Identify the desired mounting locations for the actuator. The actuator has mounting holes at both ends of its body.
  2. Attach the two provided mounting holders to your application's structure using appropriate fasteners (not included). Ensure the holders are securely fastened and aligned with the actuator's movement path.
  3. Insert the actuator's mounting points into the holders.
  4. Secure the actuator in place using the provided retaining pins through the holes in the holders and the actuator's mounting points. Ensure all pins are fully inserted and secure.
Close-up of actuator mounting points

Image: Close-up view of the actuator's mounting points, designed for secure attachment with holders and pins.

4.2 Electrical Connection

WARNING: Ensure the power supply is disconnected before making any electrical connections.

  1. The actuator operates on 24V DC. Connect the actuator to a compatible 24V DC power supply or control circuit.
  2. The actuator has two wires: a red wire and a black wire.
  3. Connect the red wire to the positive (+) terminal of your 24V DC power supply.
  4. Connect the black wire to the negative (-) terminal of your 24V DC power supply.
  5. To reverse the direction of the actuator's movement, reverse the polarity of the power supply (connect red to negative, black to positive).
  6. Ensure all connections are secure and properly insulated.
Close-up of actuator wiring

Image: Close-up of the actuator's wiring, showing the red and black power leads.

5. Operating Instructions

  1. Once properly mounted and wired, apply 24V DC power to the actuator.
  2. The actuator will extend or retract depending on the polarity of the applied voltage.
  3. To change the direction of movement, reverse the polarity of the 24V DC power supply. This typically requires a DPDT (Double Pole Double Throw) switch or a motor control circuit.
  4. The actuator has a standard stroke of 100mm. It will automatically stop at the end of its stroke due to internal limit switches.
  5. Do not attempt to force the actuator beyond its designed stroke limits.

6. Maintenance

  • Cleaning: Keep the actuator body clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or solvents.
  • Inspection: Periodically inspect the actuator for any signs of damage, wear, or loose connections. Check mounting points and wiring for integrity.
  • Lubrication: The actuator is generally maintenance-free and sealed. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
  • Storage: When not in use, store the actuator in a dry place, away from extreme temperatures and moisture.

7. Troubleshooting

ProblemPossible CauseSolution
Actuator does not moveNo power, incorrect voltage, loose wiring, overloadedCheck 24V DC power supply, verify wiring connections, reduce load, inspect for internal damage.
Actuator moves in wrong directionIncorrect wiring polarityReverse the polarity of the 24V DC power supply.
Actuator stops prematurelyOverload, obstruction, internal limit switch issueReduce load, remove any obstructions, contact support if limit switch is suspected.
Excessive noise during operationOverload, mechanical obstruction, internal wearReduce load, check for obstructions, ensure proper mounting. If noise persists, contact support.

8. Specifications

FeatureSpecification
ModelJS-TGZ-U1
BrandAramox
Voltage24V DC
Maximum Push / Pull Force750N
Standard Stroke100mm
No-load Speed10mm/s
Environment Temperature-26℃ to 50℃
Standard Protection LevelIP54
Noise LevelLess Than 42dB
WeightApprox. 1044g / 36.8oz

9. User Tips

No specific user tips are available at this time. Always ensure proper installation and adhere to the maximum load specifications for optimal performance and longevity.

10. Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Please have your model number (JS-TGZ-U1) and purchase details ready. For comprehensive details and diagrams, please refer to the official user manual PDF provided by the seller.

© 2024 Aramox. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.